Tender For Work Of Installation Of Led Rope Lights And Strengthening Of Street Light Poles On The Road From Swarn Jayanti Puram Community Centre To Bunkar Mart, Along With Installation Of New Street Lights On A 250-Meter Stretch Of Road.
Tender Value
1 Crore
Estimated cost
Bid Submission
12 Oct 2026
26 days left
EMD
2.01 Lakhs
Bank guarantee accepted
Document Fee
7198
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Installation Of Led Rope Lights And Strengthening Of Street Light Poles On The Road From Swarn Jayanti Puram Community Centre To Bunkar Mart, Along With Installation Of New Street Lights On A 250-Meter Stretch Of Road.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of cost Rope light on Gl Octogonal pole 4.8 watt per met.220 Volt copper wire 12 mm. dia etc. Complete in all respect as per direction of E/I (Each pole required @ 18M X 89 pole=1602 M) |
| 2 | Annual Maintenance and Operation LED roap light on Gl octagonal pole for per pole one year Including work of skilled electrician helper tools and plant and Hydra/Elevetor with electric tape cello tape extra cable etc. Complete in all respect as per direction of E/I |
| 3 | loading,unloading and cartage of G.I. Octagonal poles from GDA store of MBD to pocket C Site of MBD. |
| 4 | Providing and fixing of Street Pole light brackets with decorative design , Pre GI Material, lase cut with golden paint in any shape of Om, Damru or Trishul etc. complete in all respects as per satisfaction of Engineer In Charge. |
| 5 | S/F of 6 AMP to 32 AMP to SPMCB(10KA)C. Curve etc.complete in all respect as per direction of Engineer in charge.CAT-B |
| 6 | S/F of 2.5 sqmm single core copper wire for connection to MCB and switch board etc. complete in all respect. |
| 7 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Size: 35sq.mm 3-1/2 core, Schedule Item No.501(k) |
| 8 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) (136×0.755×111÷100=113.97) |
| 9 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Size: 50sq.mm 3-1/2 core, Schedule Item No.501(l) |
| 10 | Supply and fixing 40 A TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. |
| 11 | Supplying & Laying of 10 Sqmm X 2 Core PVC sheathed unarmoured cable 1.1 KV grade XLPE insulated and FRLS PVC sheathed UNARMOURED cable conforming to relevant IS.etc. |
| 12 | Supply & fixing of 25 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 460 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 8 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 13 | From MBD GDA store 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with foundation bolts,Supply by GDA store from MBD. |
| 14 | Loading,unloading and cartage of G.I. Octagonal poles from GDA store of MBD to pocket C Site of MBD. |
| 15 | Construction of RCC plinth foundation size 600 x 600 x 1700 mm depth for 9 mt. To Mt. Long street G.I. Octagonal pole (Rag bolt & base plate provided by GDA store) complete in all respect as per direction of engineer in charege. |
| 16 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. CAT- AAA |
| 17 | Providing and fixing of Street Pole light brackets with decorative design , Pre GI Material, lase cut with golden paint in any shape of Om, Damru or Trishul etc. complete in all respects as per satisfaction of Engineer In Charge. |
| 18 | Supply, installation, testing and commissioning of IP66 protected LED Post Top Luminaire, hat shape type, suitable for mounting on boundary wall / compound wall pillars, of 45 Watt power consumption, complete in all respects. The luminaire shall be made of corrosion-free pressure die-cast aluminium housing, duly powder coated with pure polyester grey colour finish, with impact resistance IK07, CRI ≥70, and reduced glare optical system for uniform and comfortable illumination along boundary wall periphery.The luminaire shall be designed, manufactured and tested in accordance with IS 10322 (Part-5 / Section-3):2012, complete with street optics / post-top optics, integral LED driver, all mounting accessories, clamps, fasteners, internal wiring, and making necessary electrical connections, including testing and commissioning at site, as required. Approved UPPWD make or equivalent approved by Engineer In Charge. |
| 19 | Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip avanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 20 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of 200W Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5°C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, THD <10% as per IEC 61000-3-2, P.F.>0.95, IP-66, IK-10, CRI>70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120 deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. |
| 21 | Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc complete in all respect.. CAT AAA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender