Tender For Construction Of Boundary Wall With Precast Reinforced Cement Concrete Panels After Demolishing The Existing Tilted Boundary Wall Of Te Building, Sanjay Nagar, Akleshwar Under Bharuch Oa (Surat Ba) (2Nd Call)
Tender Value
7.62 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
5 days left
EMD
15300
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bharuch → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Boundary Wall With Precast Reinforced Cement Concrete Panels After Demolishing The Existing Tilted Boundary Wall Of Te Building, Sanjay Nagar, Akleshwar Under Bharuch Oa (Surat Ba) (2Nd Call)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | a) All kinds of soil. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 5 | (a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : |
| 7 | (a) Foundations, footings, bases of columns, etc. for mass concrete. |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 10 | (a)New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 12 | (a)Two or more coats on old work. |
| 13 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 14 | (a)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 15 | (a)Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 16 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 17 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 18 | (a)In cement mortar |
| 19 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 20 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: |
| 21 | (a)Old & corroded reinforcement |
| 22 | (b)Bricks available from demolishing brick work. |
| 23 | Fencing with angle iron post placed at| required distance embedded in cement] concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of] barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made| per metre cost of total length of barbed wire used. : |
| 24 | (a) With G.I. barbed wire |
| 25 | R.C.C. Standards post/ struts/rails/ pales providing and installation of RCC prestressed folding wall M25 grade with following specifications: a) RCC panel M25 grade size Lenth 2100 MM,Width 300 MM and 50 MM Thickness with 4 Nos heavy high carbon steel with high stressed tension having both side smooth surface. b) RCC column M25 grade of size 150 MM x 150 MM x 2700 MM Length with 7 Nos heavy high carbon steel with high stressed tension. as per direction of Engineer-in-charge The joints between panels and poles shall be filled with cement mortar 1:2 (1 cement : 2 coarse sand) (cost of earth works in excavation, concrete works in foundation to be paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender