Tender For Improvement Of Toilet Of Sos Mess At Klp Khurda(Bn Hq 110 Bn Bsf) Under Shq Bsf Chennai.(Providing And Fixing Of Electrical Items And Fixtures)
Tender Value
92724
Estimated cost
Bid Submission
30 Sep 2026
7 days left
EMD
1854
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Toilet Of Sos Mess At Klp Khurda(Bn Hq 110 Bn Bsf) Under Shq Bsf Chennai.(Providing And Fixing Of Electrical Items And Fixtures)
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round/square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,frequency 50/60 hz, Operating temp range - 5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/ 4000°K /5700°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim .(by removing the existing fittings.) |
| 2 | LED Batten light (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K/4000°K /5700°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/Name Engraved/ Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management:heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast/Extruded aluminium Body (Thickness > 1.20 mm) |
| 3 | Supplying, installing, testing and commissioning of pre wired 10 watts LED mirror fittings complete with electronic driver and all accessories directly on existing wall including connection etc. as required Crompton item Code : CCS-103-10-65-SL-DP-NWH or equivalent specifications makes from ( Wipro/Havells/Philips) by removing the existing fittings. |
| 4 | Supplying, installing, testing and commissioning of 15 Ltr Electric storage water heater( geyser) CG Make solarium care or equivalent specifications from any other make i.e Havells/recold /V -Guard /orient/usha/Jaguar on existing wall including connection i/c P/F of suitable water connection pipes (hot/cold water and steel including connection etc. as required. |
| 5 | Supplying, installing, testing and commissioning of 300 mm Metallic exhaust fan on the existinng opening including connection etc. as required .( Havells item code no.Havells Ventil Air DB FHVVEMTDBB12 or equivalent specifications frrom any other make i.e CG/Wipro/Philips/Jaguar) by removing the existing fittings. |
| 6 | Supplying, installing, testing and commissioning of 25A - Motor Starter - 2 Module switch with all accessories directly on existing modular plate & switch box including connections etc. as required.(Legrand MyriusTM Item Code 6792 72 or equivalent specifications from any other make i.e CG/Wipro/Philips/Jaguar) by removing the existing fittings. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender