Tender For Road Safety Works From Ch. 35.929 Km (Jhumur Bridge) To Ch.88.60 Km (Hasimara) Of Ah-48 ( Nh-517,Nh-17, & Nh-317) Including 13(Thirteen) Nos. Black Spot Under Construction Division, Special Project, Asian Highway-48, In The District Of Jalpaigu
Tender Value
1.48 Crore
Estimated cost
Bid Submission
27 Oct 2026
36 days left
EMD
2.96 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Road Safety Works From Ch. 35.929 Km (Jhumur Bridge) To Ch.88.60 Km (Hasimara) Of Ah-48 ( Nh-517,Nh-17, & Nh-317) Including 13(Thirteen) Nos. Black Spot Under Construction Division, Special Project, Asian Highway-48, In The District Of Jalpaiguri & Alipurduar , West Bengal During The Year 2026-27 (Job No. Nh-17,317 & 517/West Bengal/2026-27/ Rsce-01).
BOQ
| Sl. No. | Item Description |
| 1 | High Mast Solar LightSupplying, Installation, Testing and commissioning 12.50 m High Mast solar light made up with S355JO/JR as per BSEN 10025 or equivalent having pole dimension of Top dia - 150mm, bottom dia - 360mm, thickness - 3 mm base plate - 520mm x 520mm x 25mm fixed on parapets on RCC foundation at Road Flank, and fitted with 6 nos 60 watt, 12 Volt solar lamp, 110- 130 Lumen/watt, IP-65/IP-66 for LED, Colour Temperature- Cool day light (5700K ±500K) with 150 Wp or above SPV Module , not less than 12.8 Volt - 60 Ah Lithium Ferro Phosphate solar battery including erection, insulation and all complete including all materials |
| 2 | Type - B, \\"THRIE\\" : Metal Beam Crash BarrierProviding and erecting a \\"Thrie\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long omplete as per clause 811 |
| 3 | Painting Two Coats on New Concrete SurfacesPainting two coats, after filling the surface & applying a sealing primer, with synthetic enamel paint in all shades on new plastered concrete surfaces as per MORT7H's specification 03.6.2. (Reference to MORT&H's specification 803). |
| 4 | Painting on Steel Surfaces :- Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade (Reference to MORT&H's specification 803). |
| 5 | Tack CoatProviding and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).On bituminous surface @ 0.25 kg /sqm. |
| 6 | Bituminous ConcreteProviding and laying bituminous concrete with 100-120 TPH batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of approved grade@ 5.4% (min) for Gr.-2 , as per table 500-17, and mix design done as per table 500-10 and job mix formula as per cl. 505.3.3 and filler (Cement /hydrated lime /Rock dust ), transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory tandem roller and with pneumatic tyre roller of 12 to 15 tonne weight with a pressure at least 0.56 MPa as directed by E-I-C to achieve the desired compaction as per clause no 507.3.5 complete in all respects ref. to MORTH specification clause No.507. for Grading-2 ( 13.2 mm nominal maximum aggregate size), Layer thickness: 40mm |
| 7 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes (Reference to MoRT&H's specification 803). |
| 8 | Retro-Reflectorised Traffic Signs:Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when signs with maximum side dimensions do not exceed 600mm, or with aluminium sheeting 2.0mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). |
| 9 | 90 cm equilateral triangle |
| 10 | 60 cm circular |
| 11 | 60 cm x 45 cm rectangular |
| 12 | 90 cm high octagon |
| 13 | Providing and erecting direction and place identification retro reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801) |
| 14 | Providing and erecting direction and place identification retroreflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). |
| 15 | Supplying & fixing of Raised Pavement Markers/Road Studs/Cats Eye made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face which shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and compling to Specifications of Category A of MoR&TH Circular No. RW/NH/33023/10-97 - DO III Dt. 11.06.1997 & MoRT&H's specification for Road &Bridge Works (Fifth Rev.). Marker height shall not be less than 10 mm and shall not exceed 20 mm, width shall not exceed 130mm and with minimum reflective area of 13 sqcm on each side and slope to the base shall be 35 ± 5 degree. Fixing will be without nails but by using epoxy resin based adhesive as per manufacturer's recommendation including site clearence etc.complete as directed by the Engineer in Charge. The contractor will have to provide a test certificate from a reputable national/international laboratory comforming the above specifications. |
| 16 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80- 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings (Reference to MORT&H's specification 806) |
| 17 | Supplying & fixing of Hazard Markers of size : 30cm X 90 cm as per IRC :79-1981 (The above is inclusive of vertical post) |
| 18 | PGR Providing, fitting and fixing mild steel railing with one shop coat with red oxide primer and three coats of synthetic enamel paint and consumables to safeguard against weathering and corrision complete as per drwaing and Technical Specifications (Reference to MoRT&H's specification 2703.2 & 1900). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 36 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 43 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender