Tender For Providing 11Kv Ht Line From Proposed 11/0.4Kv,630 Kva Sub-Station Along With Ct/Pt Strengthening For Sop To 370 Kw Load Critical Care Block At Regional Hospital Una Bid No- Ued/86/2026-27 Ts No-54/2026-27 (Wbs No-D-26-0829) Deposit Work Under E
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
14725
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Una → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing 11Kv Ht Line From Proposed 11/0.4Kv,630 Kva Sub-Station Along With Ct/Pt Strengthening For Sop To 370 Kw Load Critical Care Block At Regional Hospital Una Bid No- Ued/86/2026-27 Ts No-54/2026-27 (Wbs No-D-26-0829) Deposit Work Under Esd Hpsebl Noi Una.
BOQ
| Sl. No. | Item Description |
| 1 | Erection Part- 11kV HT Line |
| 2 | Stringing and sagging conductor:- Laying of conductor stringing and sagging, binding with insulator complete in all respect. |
| 3 | Laying of G.I Wire, Stringing, Sagging and binding complete in all respect. |
| 4 | Inspection fees for initial or peroodical inspection for 11kv HT Line |
| 5 | Erection Part- 11/0.4kV,630 KVA Sub-Station |
| 6 | Erection, Testing and Commissioning of 11/0.4 kV, 630 kVA Distribution Sub-Station on RCC Plinth complete in all respects, including erection of 11/0.4 kV, 630 kVA Distribution Transformer on RCC plinth, fixing of HT/LT bushings and accessories, jumpering, earthing, danger plates, anti-climbing devices, connection of HT and LT lines/cables, testing and commissioning of the complete sub-station as per HPSEBL specifications and directions of the Engineer-in-Charge, ensuring satisfactory operation. |
| 7 | Providing manual carriage and transportation of departmental materials from Central Store to the work site by the contractor at his own arrangement, including loading, unloading, handling, stacking, labour, tools & plants, transportation vehicles, fuel, watch and ward, and all other incidental charges complete in all respects as directed by the Engineer-in-Charge. |
| 8 | Inspection fees for initial or peroodical inspection for 11/0.4kv,63 kva Sub-Station. |
| 9 | Erection of CT/PT S/Stn. Str.:-Digging of Pit for S/T Pole and earthing, drilling of holes in X-arm, preparation of plate form str. Member CI, Alluminium Paint AI i.e X-arml, Knee bracing set, erection of D-pole,errection of plate form, ercetion of x-Arm,, Energy Meter, Erection of T/F, and earthing conn. to T/F G.O Switch lightning etc. erection of Stay Set, Erection of Jumper, erection of CT/PT Unit,Pipe earthing 3 Nos., Erection of LT cable, brabed wire and painting, 3 Nos. earthing to S/Stn. by prov. 50Kg Salt charcole in each earthing i/c construction of trench for earthing as per REC Board Standard complete in all respect. |
| 10 | SUPPLY PART---11kV HT Line |
| 11 | Prov.AAAC 7/4.26 mm Conductor (PROVIDED BY HPSEBL) |
| 12 | Prov.G.I.Wire No. 8 SWG in mtr. |
| 13 | SUPPLY PART---11/0.4kV,630 KVA Sub-Station |
| 14 | Distribution Transformer (Ordinary) 11/0.4 KV, 630 KVA |
| 15 | Pipe Earthing Set |
| 16 | LT Cable (3.5 Core) 500 mm²x2 Incoming (PROVIDED BY HPSEBL) |
| 17 | Transformer Bed and Plinth Foundation (Civil work As per HPSER) |
| 18 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 21 | Foundations, footings, bases of columns, etc. for mass concrete |
| 22 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 23 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 25 | Providing and Fixing wooven mesh fencing along with Gate & locking arrangement (for more detail check attached drawing and measurement detail) |
| 26 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. |
| 27 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
| 28 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 29 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. wherever required, all complete In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 30 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Made of G.I. wire of dia 4 mm |
| 31 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 100x58x1.90 mm |
| 32 | Providing and fixing ISI markedoxidisedM.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm |
| 33 | SUPPLY PART--CT/PT Str. |
| 34 | Prov. CT-PT Combined Unit [PT:11 kV/110 V) ; CT:10-400/5A] (PROVIDED BY HPSEBL) |
| 35 | Prov.3-phase, 3/4-Wire CT-PT operated Static Trivector Meter (DLMS Compliant) |
| 36 | I. Prov. PVC Multistrand 2.5 mm² copper wire |
| 37 | II. Prov. 1 inch dia GI pipe for concealin |
| 38 | III. Prov. bend joints/ elbo |
| 39 | Prov.Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) (PROVIDED BY HPSEBL) |
| 40 | Prov.Muffs with concerete filling |
| 41 | Prov. X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 4 Nos] |
| 42 | Prov.X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 43 | Prov. X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of CT-PT Unit] |
| 44 | Prov.Angle Iron (50X50x6 mm), Length: 2800 mm x1 Nos for LA's) |
| 45 | Prov.CT-PT Unit Belting & Knee Bracing |
| 46 | Prov.MS Angle Iron (50X50x6 mm), Length : 2800 mm x 4 Nos |
| 47 | Prov.MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos |
| 48 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
| 49 | Prov.GO AB Switch Unit (11kV, 400A, 25 KA ) |
| 50 | Prov.D.O Fuse Unit |
| 51 | Prov.Sarge Arrester, 9 kV Station Class (Porcelain Type) (PROVIDED BY HPSEBL) |
| 52 | Prov.Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
| 53 | Prov.Stay set complete |
| 54 | Prov.Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
| 55 | Prov.Pipe Earthing Set |
| 56 | Prov GI Wire 6 SWG For Earthing |
| 57 | Prov.Half Clamp (M.S. Flat 50X6 mm) |
| 58 | Prov.Full Clamps (M.S. Flat 50X6 mm) |
| 59 | Prov.Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 60 | Prov.Aluminium Thimble |
| 61 | Prov.Aluminium Thimble (Copper) |
| 62 | Prov.Danger Plate |
| 63 | Prov.Barbed Wire |
| 64 | Prov.Red Oxide |
| 65 | Prov.Auminium Paint. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender