Tender For special Repair To Internal Road To Incl Road Furniture Of 1907 Med Regt And 2 Mdsr At Dinjan Mil Stn Under Ge Dinjan
Tender Value
1.14 Crore
Estimated cost
Bid Submission
12 Oct 2026
15 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Internal Road To Incl Road Furniture Of 1907 Med Regt And 2 Mdsr At Dinjan Mil Stn Under Ge Dinjan
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces exceeding 50 mm and not exceeding 100 mm deep and area not exceeding 400 sqm complete all as specified and as directed. |
| 2 | M&L for 7.5 cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40 mm size) with lime stone, sand stone, flint or quartzite, spread, rolled and consolidated to gradient and camber required with 8 to 10 ton power roller, complete all as specified and as directed. |
| 3 | M&L for Premix bituminous macadam (consolidated thickness 75 mm or less) with 4% binder content by weight of total mix using bitumen VG-30 laid, rolled and compacted to required gradient and camber with 8 to 10 tonne capacity power roller by using hot mix plant & mechanical paver complete all as specified and as directed. |
| 4 | M&L for preparing of unsurfaced water Bound macadam/bituminous macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat using paving bituminous primer VG-10 at 7.5 kg per 10 sqm. complete all as specified and directed. |
| 5 | M&L for preparing existing black/WBM/BM top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (paving bitumen) at 5 kg/10 sqm complete all as specified and directed. |
| 6 | M&L for Bituminous premix asphaltic dense concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 7 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125 mm x 125 mm x 25 mm (shank 65 mm) of high efficiency Mono crystalline solar panel 2.4V/0.3 watt one Ni-Cd rechargeable battery (1.2V 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturers instructions etc. all as specified and directed. |
| 8 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA strip lens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufacturers instructions. |
| 9 | M&L for applying 2.5 mm thick road marking strips (retro-reflective) of specified and shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and shoe heater, driven by an experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete all as specified and as directed. |
| 10 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. etc. all as specified and directed. |
| 11 | M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 12 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness, size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding/surface through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 13 | 13. Manufacturing, supplying and fixing retro reflective Mandatory/Regulatory sign boards of 900 mm diameter with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC:67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up of M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-Charge. |
| 14 | Manufacturing, supplying and fixing retro reflective Cautionary/Warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC:67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up of M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint. |
| 15 | Demolition of brickwork or stone/boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 16 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar in 1:4 complete all as specified and as directed. |
| 17 | 17. M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 18 | M&L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and as directed. |
| 19 | S&F for speed breaker DA-1010 425x50x500 mm is designed so dynamically and compact that it can bear maximum load of it. The body is made of ABS material. Two highly reflective reflectors moulded in PMMA. Material are welded with ABS plate through ultrasonic welding process and then fixed on to the speed breaker so that dust and water cannot touch reflectors inside and thus it maintains its reflectivity for a longtime. Fixing in road by drilling a hole and with epoxy hardener etc. as per manufacturer's instructions at the location complete all as specified and as directed. Make: Sinor or equivalent as approved by GE. |
| 20 | M&L for scarifying or picking gravelled, macadam or bituminous surfaces in area X not exc 400 sqm, n. exc 50mm deep removing and depositing to low lying area all as specified. |
| 21 | Laying and compacting 75mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass spreading with sensor paver and rolling with vibratory roller with capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed. |
| 22 | M&L for preparing unsurfaced Wet Mix Macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. all as specified and directed by Engineer-in-Charge. |
| 23 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for applying evenly a priming/tack coat with bituminous primer using paving bitumen at Per 10 Kg/X Sqm all as specified and directed by Engineer-in-Charge. |
| 25 | M&L for applying evenly a priming/tack coat with bituminous primer using paving bitumen at Per 5 Kg/X Sqm all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for Bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient using paving bitumen any penetration complete all as specified and directed. |
| 27 | Repair to potholes, any depth, not exc 1.00 Sqm each including sweeping free from dust and mud, or water, scoring in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 Kg/X sqm, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) 9.80 Kg per /10 Sqm, blinder with 0.09 cum of stone chippings @ 6.03mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exceeding 30 mm complete all as specified and directed. |
| 28 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No DA 972.0 fixed with and incl MS stud of suitable size as per manufacturers instructions. |
| 29 | S&F road safety Convex mirror model No OS-790 from OSCAR safety solutions with 80 CM dia, including excavation of post holes in hard/dense soil, filling of mass concrete type D-2 (1:4:8) using 20mm graded aggregates in fdn (0.30 x 0.30 x 0.45 M) and removal of surplus soil complete all as directed by Engineer-in-Charge. |
| 30 | Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 31 | S&F ABS speed breaker/rubber rumbler model No OS-792 including fixing with epoxy compound and anchoring with nails complete all as directed by Engineer-in-Charge. |
| 32 | Supplying & fixing retro reflective sign board made of high intensity retro reflective sheeting pasted on both sides of 3mm thick ACP sheet with letters/graphics to be overlayed high intensity retro reflective sheeting of make 3M/Avery denison as approved by I.R.C./MORTH duty plotted cut out of approved colour fixed with SS frame work complete all as specified and directed by Engineer-in-Charge.Note: SS Frame work will be measured as paid separately. |
| 33 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and similar work complete all as specified and as directed. |
| 34 | M&L for preparing bituminous roads Painting lines, dashes, arrows, letters, etc. or roads pavements and the like exc 10cm wide with road marking paint, white or golden yellow (for thermoplastic road/pavement marking approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete in all respect with 2.5 mm thick layer of marking and 250 grn/sqm glass beads consumed in per sqm ratio all as specified and directed. |
| 35 | Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/loose soil for repair of road side berms. |
| 36 | M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. |
| 37 | Removing excavated soil n exc 50mtr and depositing where directed at a level n exc 1.5 above starting point. |
| 38 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground level. |
| 39 | Dismantling of stone slabs or tiles of any description or thickness as in floors, pavings, aprons, pathway etc laid dry or laid dry and pointed complete all as specified and as directed. |
| 40 | M&L for 75mm thick cement concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified & as directed. |
| 41 | S&F Machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade, with grey cement & pigment. |
| 42 | M&L for cement concrete type B-0 1:2:4 (12.50mm graded aggregate) as in copings, kneelers, apex stonesbed plates, kerbs, watertoughs and the like. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender