Tender For maintenance Of Different M.I Schemes Under Charilam Rd Block & Bmc, Bishalgarh During The Year 2026-27/ maintenance Of Pump Motor Sets, Panel Board Materials, Suction Line Etc. Including Rewinding Of Horizontal And Submersible Motors Under
Tender Value
9.16 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
18332
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance Of Different M.I Schemes Under Charilam Rd Block & Bmc, Bishalgarh During The Year 2026-27/ maintenance Of Pump Motor Sets, Panel Board Materials, Suction Line Etc. Including Rewinding Of Horizontal And Submersible Motors Under W.R Sub-Division Bishalgarh. Dniet No:- 34/Ee/Wrd-Ii /2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Dismentaling of pump for over hauiling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineerin- Charge.For LI |
| 2 | Dismantaling of horizontal pump and motor of 20/25 HP from the base and carrying the pump set to the nearest workshop for repairing the body thread of stag nut and carrying the same to the scheme and fitting fixing the pump set as before as per direction of the Engineerin-charge. |
| 3 | Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-charge.10 to 12 mm thick |
| 4 | Supplying and greasing/applying of grease of approved quality as per direction of Engineer-in-charge. |
| 5 | Supplying and fitting fixing of pump cooling pipe of best quality as per direciton of Engineer-in-charge. |
| 6 | Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality.150 mm Ø |
| 7 | 190 mm Ø |
| 8 | 225 mm Ø |
| 9 | Providing & fitting fixing coupling nuts & bolts (all Size) of approved quality.For LI |
| 10 | Providing & fitting fixing coupling rubber bush (All Size) of approved quality.For LI |
| 11 | Providing & fitting fixing coupling star bush (All Size) of approved quality.150 mm dia |
| 12 | 190 mm dia |
| 13 | 225 mm dia |
| 14 | Providing & fitting fixing Pump Shaft of approved quality. |
| 15 | Providing & fitting fixing Shaft sleeve bush of approved quality.For LICast Iron(CI) |
| 16 | Providing & fitting fixing Shaft sleeve nut of approved quality.Cast Iron(CI) |
| 17 | Providing & fitting fixing coupling/ impeller Key of approvedquality.Stainless Steel |
| 18 | Providing & fitting fixing C.I. gland of approved quality.For LI |
| 19 | Providing & fitting fixing Gland nut / Stag nut 100 mm long for gland of approved quality.3.16.1 For LI |
| 20 | Providing & fitting fixing Lantern Ring for pump of approved quality. |
| 21 | Supply & fitting fixing ball bearing of approved quality for pump required during overhauling.6305 Ball bearing (TATA /SKF) |
| 22 | 6306 Ball bearing (TATA /SKF) |
| 23 | 6308 Ball bearing (TATA /SKF) |
| 24 | 6309 Ball bearing (TATA /SKF) |
| 25 | 6310 Ball bearing (TATA /SKF) |
| 26 | Providing & fitting fixing C.I tail piece of approved quality at site of work.150 mm dia |
| 27 | 125 mm dia |
| 28 | Providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.150 mm dia |
| 29 | Providing & fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality.C.I foot valve weight |
| 30 | C.I foot valve ring |
| 31 | C.I foot valve net |
| 32 | Dismentaling of old pump/motor from base & stacking of materials & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge. |
| 33 | Dismentaling of G.I pipe including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.125/150 mm dia |
| 34 | Dismentaling of G.I bend including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.125/150 mm dia |
| 35 | Installation of pump motor set including carriage of materials from Departmental store yard to site of work and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run for 10hrs. in two spell as per direction of the Engineer-in-charge. |
| 36 | Supplying & fitting fixing of spare parts for 20/25 HP Horizontal motor.Motor fan |
| 37 | Terminal plate |
| 38 | Labour charge of lifting of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block as per direction of the Engineer-in-charge. |
| 39 | Complete re-winding of 400/440 volt AC 3 phase vertical submersible motor of different make after taking out of entire burnt copper wire and rewinding the motor with proper gauge of supper enamel insulated copper wire of approved quality , tapping , insulating refitting the same as before including carriage the motor from respective scheme and complete with trial run as per direction of the Engineer-in-charge.12.5 HP-22.5 HP |
| 40 | Labour charge for lowering & fifting fixing of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of the Engineer-in-charge. |
| 41 | Labour charge for dismentalling and overhauling of 5,000 to 20,000 GPH water lubricated vertical submesible pump after taking out shaft etc. including necessary fittings of new & existing submersible materials as per direction of the Engineer-in-charge. |
| 42 | Supplying & fitting fixing of spare parts for submersible pump 5 HP to 25 HP of approved quality as per direction of Engineer-in-Charge.Impeller of brass make |
| 43 | Motor bush (Brass make) |
| 44 | Sand guard |
| 45 | Thrust bearing with plate |
| 46 | Pump bush (Brass make) |
| 47 | Safety clamp |
| 48 | Pump Shaft |
| 49 | Pump Stainless steel sleeve |
| 50 | Pump Coupling |
| 51 | Pump neck ring |
| 52 | Pump column nut |
| 53 | Impeller key |
| 54 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge.Size 1.80 X 1.20 X 0.025 mtr. |
| 55 | Dismentling of pannel board by disconnection of all electricalequipments & stacking of materials & return the same to Sub-Divisional store as per direction of the Engineer-in-charge. |
| 56 | Labour charge for reinstallation of all electrical equipments (dismentalled serviceable materials, if any additional / replacement of electrical eqiupments required will be paid separtely) on the pannel board including trial run for 10 hrs in two spell complete as per direction of the Engineer-in Charge. |
| 57 | Supplying & fitting fixing manually operated oil immerged starter of approved quality.30HP Osco/BCH Make |
| 58 | Supplying & filling of Transformer Oil in the oil tank of manually operated oil immerged starter of approved quality. |
| 59 | Repairing of OSCO starter including supplying & fixing of necessary spare parts as per direction of Engg.- In - Charge.Stand finger |
| 60 | Gola finger |
| 61 | CT Coil |
| 62 | Magnet Coil |
| 63 | Circuit board for Osco starter of Backelite make |
| 64 | Providing & fixing 200 Amps busbar of size 600X 450X100 mm with 4 nos. copper strip of size 450X40X4 mm of approved quality. |
| 65 | Providing and installation of Copper Strips of 200 Amps busbar by replacing the damaged one with necessary nuts and bolts etc. as per direction of Engg.- In - Charge. |
| 66 | Supplying & fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality.7/16 Copper Wire |
| 67 | 1 sqmm Multistrand Wire |
| 68 | Supplying and fitting fixing of selector switch on the panel board of approved quality. |
| 69 | Supplying & fitting fixing kit cut for main & sub-main swtich (Male & female) as per direction of the Engineer in Charge.63 Amps main switch |
| 70 | 200 Amps main switch |
| 71 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineerin-charge.ii. 63 amps |
| 72 | iv. 200 amps |
| 73 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make)with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer -incharge. |
| 74 | Supplying and fitting fixing AC Ammeter (Moving Iron) on the panel board of approved quality.SMI-144, Range 0-10A |
| 75 | Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.vi. 20 HP |
| 76 | vii. 25 - 30 HP |
| 77 | Providing and fitting fixing of brass fullway valve with handle in the GI pipe line including cutting, threading etc. complete as per CPWD specification and direction of the Engineer - in - charge.v. 40 mm dia |
| 78 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. Internal work - Exposed on wall.v. 40 mm dia. nominal bore |
| 79 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. External work.x. 125 mm dia. nominal bore |
| 80 | xi. 150 mm dia. nominal bore |
| 81 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.v. 125 mm dia.A. PN - 1.6 |
| 82 | vi. 150 mm dia.A. PN - 1.6 |
| 83 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.x. 125 mm dia |
| 84 | xi. 150 mm dia |
| 85 | Providing & fitting fixing of MS flange ( 8 mm wall thickness) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge.i. 150 mm dia |
| 86 | ii. 125 mm dia |
| 87 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality.150 mm dia |
| 88 | 125 mm dia |
| 89 | 100 mm dia |
| 90 | 80 mm dia |
| 91 | Providing and fitting fixing PVC suction hose pipes of wall thickness 6 mm. as per relevant IS specification and direction of Engineer-in-charge.iv. 150 mm dia |
| 92 | Providing and fitting fixing M.S. clamp for hose pipes with nuts & bolts complete as per relevant IS specification and direction of Engineer-in-charge.iv. 150 mm dia |
| 93 | Providing and fitting fixing MS Foot valve as per relevant IS specification and the direction of the Engineer-in-charge.iv. 150 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender