Tender For Construction Work Of Two Classrooms With Two Verandahs In Raes Banchuri Under Development Block Bhilangana.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Oct 2026
10 days left
EMD
68000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tehri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Two Classrooms With Two Verandahs In Raes Banchuri Under Development Block Bhilangana.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in rough excavation, banking excavated earth in layers 20 cm in depth, breaking clods, watering, rolling each layer with ½ ton or steel rammers, and rolling every 3rd and top-most layer with 8 tonnes dressing and dressing up in embankments for roads, flood banks, guide banks or filling up ground |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – All work upto plinth level: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate) |
| 3 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement – All work upto plinth level in 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – All work upto plinth level 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal) |
| 5 | Random rubble masonry with hard stone in foundation and plinth in levelling with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) at plinth level with cement |
| 6 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand) |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement in 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate) |
| 8 | Providing and fixing pressed steel door frames confirming to IS:43 from commercial mild steel sheet of 1.25 mm thickness including jamb, bead and if required angle and provided mild steel angle of 5 or base ties of 1.25mm pressed mild steel welded or rigidly fixed mechanical means, adjustable lugs with split end tail to each jamb butt hinges 2.5mm thick with mortar guards, lock strike-plate as specified |
| 9 | Brick work with F.P.S. bricks of class designation 75 in superstructure level upto floor V level and sizes in cement mortar 1:6 |
| 10 | Providing and fixing tubular frames for doors, windows and ventilator mild steel Tee-sections, joints mitred and welded with 15x3 cm long embedded in cement concrete blocks 15x10x10 cm of 1 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm no size) or with wooden plugs and screws or rawl plugs and screws |
| 11 | Structural steel work in single section fixed with or without c plate including cutting, hoisting, fixing in position and applying a pr coat of approved steel wood beading 62X19 mm |
| 12 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 2nd class teak wood beading 62X19 mm |
| 13 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : |
| 14 | Centring and shuttering including strutting,propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access |
| 15 | Centring and shuttering including strutting,propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 16 | Centring and shuttering including strutting,propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 17 | Centring and shuttering including strutting,propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 18 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. |
| 19 | 12 mm cement plaster of mix in 1:6 (1 cement : 6 fine sand) in Smooth surface |
| 20 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 |
| 21 | 6 mm cement plaster of mix : 13.16.1 1:3 (1 cement : 3 fine sand) |
| 22 | Filling available excavated earth (excluding rock) in trenches, plin sides of foundations etc. in layers not exceeding 20cm in de consolidating each deposited layer by ramming and watering, up to 50 m and lift upto 1.5 |
| 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement |
| 24 | Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 26 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/ 10 sqm of approved brand and manufacturer. |
| 27 | Painting Steel work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/ 10 sqm of approved brand and manufacturer. |
| 28 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 29 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. |
| 30 | Grading roof for water proofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand) 22.14.2 |
| 31 | 35 mm thick including ISI marked Stainless Steel butt hinges with |
| 32 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 9.96.1 300x16 |
| 33 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.97.1 300x10 |
| 34 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.100.1 125 mm |
| 35 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.12.41.2 110 mm diameter |
| 36 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 37 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender