Tender For Special Repairs To Sluice No.2, 4, 6, 5, 8, 10, 11, 17, Taildam & Drop At L.S.8.245 Km In High Level Canal In Udumalpet Taluk Of Tiruppur District.
Tender Value
3.95 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
14 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Sluice No.2, 4, 6, 5, 8, 10, 11, 17, Taildam & Drop At L.S.8.245 Km In High Level Canal In Udumalpet Taluk Of Tiruppur District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling clearing away and carefully stacking the materials useful for reuse of any thickness of walls in Brick/Stone masonry under 3M height etc., complete complying with standard specifications and as directed by the departmental officers. |
| 2 | Random Rubble masonry in Cement Mortar 1:4 (One Cement and four M-sand) using old stones available at site including simultaneous pointing with same mortar in the exposed surfaces including all incidental charges such as laying, finishing and curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 3 | Random Rubble masonry in Cement Mortar 1:4 (One Cement and four M-sand) using new stones available from approved quarry including simultaneous pointing with same mortar in the exposed surfaces including all incidental charges such as laying, finishing and curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 4 | Plastering with Cement Mortar 1:4 (One cement and Four P.sand) 20mm thick in all floors including laying, finishing and curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 5 | Earthwork excavation in Hard red earth, Hard gravelly/semi pervious soil obtained from borrow area of nearby villages with a lead 5 KMMR including conveyance and filling the overcuts, erroded canal banks etc., with gravelly/semi pervious soil compactable with sub grade materials in layers of 15 cm thick and thorougly compacted to 10cm with suitable compactors/pnuematic hamers as per technical spercifications including unloading and stacking at work site for premeasurement etc., complete complying with standard specifications and as directed by the departmental officers. |
| 6 | Manufacturing, fabricating, supplying and fixing in position of screw gearing shutters of size 0.45 m x 0.60m made out of 45x45x6mm ' L' angle for outer frame shutter covered by 6mm thick HR sheet by welding all round. Groove angle made out of 50x50x6mm 'L' angle for the height of 0.90m on both ends, sill beam and guide angle in middle and top made out of same angle. Screw rod of 40mm dia MS polished shaft to a length of 0.90m and threaded to a length of 0.55m. Top channel assembly made out of 100x50mm MS channel to a length of 1.00m-1nos including fish plates,bed bolt shutter operating spanners and locking cup arrangements etc., The rate is inclusive of replacing & scrapping old shutters with allied masonry works & including cost of materials,labour charges,conveyance and cost of one coat of red oxide primer and two coats of AC black paint etc., complete complying with standard specifications and as directed by the departmental officers. |
| 7 | Manufacturing, fabricating, supplying and fixing in position of screw gearing shutters of size 0.30 m x 0.30m made out of 45x45x6mm ' L' angle for outer frame shutter covered by 6mm thick HR sheet by welding all round. Groove angle made out of 50x50x6mm 'L' angle for the height of 1.30m on both ends, sill beam and guide angle in middle and top made out of same angle. Screw rod of 40mm dia MS polished shaft to a length of 0.90m and threaded to a length of 0.60m. Top channel assembly made out of 75x40mm MS channel to a length of 1.00m-1nos including fish plates,bed bolt shutter operating spanners and locking cup arrangements etc., The rate is inclusive of replacing & scrapping old shutters with allied masonry works & including cost of materials,labour charges,conveyance and cost of one coat of red oxide primer and two coats of AC black paint etc., complete complying with standard specifications and as directed by the departmental officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender