Tender For Special Repairs To Sluice No.15, 16, 18 & 20 And Drops At L.S.8.035 Km And Regulator At L.S.8.870 Km Of High Level Canal In Udumalpet Taluk Of Tiruppur District.
Tender Value
3.95 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
14 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Sluice No.15, 16, 18 & 20 And Drops At L.S.8.035 Km And Regulator At L.S.8.870 Km Of High Level Canal In Udumalpet Taluk Of Tiruppur District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling clearing away and carefully stacking the materials useful for reuse of any thickness of walls in Brick/Stone masonry under 3M height etc., complete complying with standard specifications and as directed by the departmental officers. |
| 2 | Random Rubble masonry in Cement Mortar 1:4 (One Cement and four M-sand) using old stones available at site including simultaneous pointing with same mortar in the exposed surfaces including all incidental charges such as laying, finishing and curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 3 | Random Rubble masonry in Cement Mortar 1:4 (One Cement and four M-sand) using new stones available from approved quarry including simultaneous pointing with same mortar in the exposed surfaces including all incidental charges such as laying, finishing and curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 4 | Plastering with Cement Mortar 1:4 (One cement and Four P.sand) 20mm thick in all floors including laying, finishing and curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 5 | Dismantling RCC by manual / by using deploying machineries the existing Butterfly valve & Scour valve chambers etc., complete complying with standard specifications and as directed by the departmental officers. |
| 6 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 m height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casuarina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with standard specification and as directed by the departmental officers. |
| 7 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor for all RCC works on bothways including cost of steel and G.I. binding wire in all floors etc., complete complying with standard specification and as directed by the departmental officers. |
| 8 | Providing and laying in position, Standardised Reinforced Cement Concrete Mix M-20 Grade in accordance with IS:456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with above ( 5.0 cu.m) 7730 kg of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670kg of M-Sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators,finishing,curing, etc., and complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirement of IS standards.( No separate payment will be made by the Department for the excess usage of materials) |
| 9 | Earthwork excavation in Hard red earth, Hard gravelly/semi pervious soil obtained from borrow area of nearby villages with a lead 5 KMMR including conveyance and filling the overcuts, erroded canal banks etc., with gravelly/semi pervious soil compactable with sub grade materials in layers of 15 cm thick and thorougly compacted to 10cm with suitable compactors/pnuematic hamers as per technical spercifications including unloading and stacking at work site for premeasurement etc., complete complying with standard specifications and as directed by the departmental officers. |
| 10 | Manufacturing, fabricating, supplying and fixing in position of screw gearing shutters of size 0.45 m x 0.60m made out of 45x45x6mm ' L' angle for outer frame shutter covered by 6mm thick HR sheet by welding all round. Groove angle made out of 50x50x6mm 'L' angle for the height of 0.90m on both ends, sill beam and guide angle in middle and top made out of same angle. Screw rod of 40mm dia MS polished shaft to a length of 0.90m and threaded to a length of 0.55m. Top channel assembly made out of 100x50mm MS channel to a length of 1.00m-1nos including fish plates,bed bolt shutter operating spanners and locking cup arrangements etc., The rate is inclusive of replacing & scrapping old shutters with allied masonry works & including cost of materials,labour charges,conveyance and cost of one coat of red oxide primer and two coats of AC black paint etc., complete complying with standard specifications and as directed by the departmental officers. |
| 11 | Supplying and fixing of Screw Gearing Shutters of size 1.30 m x 0.90m with 1.60m high stem rod and outer frame made out of 75x75x6mm ' L' angle for outer frame shutter covered by 8mm thick HR sheet by welding all round. Groove angle made out of 90x90x6mm 'L' angle for the height of 2.00m on both ends, sill beam and guide angle in middle and top made out of same angle. Screw rod of 50mm dia MS polished shaft to a length of 1.60m and threaded to a length of 1.10m. Top channel assembly made out of 150x75mm MS channel to a length of 2.10m-2nos including fish plates,bed bolt shutter operating spanners and locking cup arrangements with gearbox etc., The rate is inclusive of replacing & scrapping old shutters with allied masonry works & including cost of materials,labour charges,conveyance and cost of one coat of red oxide primer and two coats of AC black paint etc., complete complying with standard specifications and as directed by the departmental officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender