Tender For Repairing Of Damaged Floor, Wall And Gate Of Qc/Ht Section (Bldg. No. 29) At Rfi.
Tender Value
9.98 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Damaged Floor, Wall And Gate Of Qc/Ht Section (Bldg. No. 29) At Rfi.
BOQ
| Sl. No. | Item Description |
| 1 | Removal of spoil: Labour only for removal of spoil mixed with excavated earth, broken bricks, concrete rubbish and debris, broken glasses, cut pieces of tarfelt etc, from work site to a distance of 1.50 km. outside the factory all complete (20% deduction in measurement will be made from the volume of spoil ). |
| 2 | Cutting of holes : M & L for cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise N exc 100 sq cm all complete |
| 3 | Brick work(1:6): M & L for brick work with old size subclass 'b' bricks, straight or curved on plan exc 6m mean radius with (1: 6) cement morter all complete. . |
| 4 | P.C.C. (1:2:4) : M & L for providing plain cement concrete type-B1, 1:2:4 mix (using 12.5 mm graded stone aggregate ) as in sub-base, filling and mass concrete, topping of floor all complete |
| 5 | R.C.C. (1:1.5:3) : M & L for providing reinforced cement concrete type M-20, 1:1.5:3 mix (using 20 mm graded stone aggregate) as in foundation including footings plinth beams bases for column roof slab beam lintels and excluding use and waste of necessary formwork all complete |
| 6 | Wooden fillet work : S & F plain fillet square, rectangular or triangular in sections with 2nd class hardwood of sections exceeding 3 sq.cm and not exceeding 6 sq. cm area clean sawn, secured with nails or brads all complete |
| 7 | Wooden framed work : S & F wooden framed work with 2nd class hard wood (sal) plain, solid, straight frames, wrough,framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints etc, complete in all respect. |
| 8 | Flush Door: M & L for flush shutters, solid core construction, with particle board core 30mm thick and plywood face panels, commercial type on both sides all complete |
| 9 | Butt Hinges : S & F 100 mm long butt hinges medium weight cold rolled mild steel and fixed all complete |
| 10 | Mild Steel Barrel Tower Bolt 300 mm long : S & F 300 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed all complete |
| 11 | Aluminium Handle : S & F 125 mm long extruded anodised aluminium handle fabricated type and fixed all complete |
| 12 | Aluminium sliding door bolts: S & F 250 mm aluminium alloy,anodised,sliding door bolts with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections or cast alluminium alloy and fixed,complete in all respect . |
| 13 | Door closer : S & F aluminium body door closer hydraulically regulated, designation no.2, universal type, godrej, neeta or garnish make suitable for door shutters of 701 to 850 mm in width and of wieght between 36 to 60 kg. and fixed all complete |
| 14 | Reinforcement : M & L for providing reinforcement work with tmt mild steel bars 08 mm and over, cut to length, bent to shape required, including cranking, bending, hooking ends & binding with mild steel wire (annealed) not less than 0.9 mm dia. etc.complete . |
| 15 | M.S. framed work: S & f for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering using Fe-410- W(Gde-E-250) quality-B. all complete. |
| 16 | Aluminium frame work for false ceiling: S & F for Anodised aluminium snap grid frame work for false ceiling all and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all complete. |
| 17 | M.S. small articles : S & F for providing mild steel straps, clamps, hold fasts etc, as small articles,to be fixed in position as required . |
| 18 | Pre-colour coated steel sheet: S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of make: TATA Blue scope / Everest / Jindal or substantially equivalent make of any colour having tensile (yield) strength of 550 mpa minimum, coated with aluminium zinc (az 150) @ 150 gm/sqm of coating (total both surfaces) as in roof covering cladding to wall etc. fixed with self tapping screws in every trapezoidal profile or as specified all complete |
| 19 | Prelaminated particle board : M & L for 12 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations lamination & other side balancing white lamination,fixed with screws to timber frame work all complete |
| 20 | Perforated Board : S & F for 12 mm thick perforated particle board in ceiling fixed with screws any size, to be laid in snap grid of false ceiling all complete |
| 21 | Plywood covering : M & L for fixing of plywood in wall pannelling & ceiling with 6 mm thick plywood grade BWR, type BB, fixed with screws to timber frame work all complete |
| 22 | Roughening of cement concrete floor : Labour only for roughening of old cement concrete floor. by picking, sweeping, cleaning and washing down with water to remove dust etc. as required and all complete |
| 23 | Neat Cement Finish : M & L for applying cement slurry about 1.5 mm thick on plastered or concrete surface to have the surfaces even & smooth all complete |
| 24 | Washable distempering on wall : M & L for applying two coats of washable distemper of 1st quality make- Asian / Berger / ICI or substantially equivalent make after necessary preparatory work of old surfaces with primer to distempering of wall all complete |
| 25 | Taking down plastering : Labour only for taking down cement or cement lime plaster of any description, flush pointing, any painting etc. from brick wall including raking out joints, hacking for key, scrubbing down with water etc. all complete. |
| 26 | Cement plaster(1:4): M & L for providing 12 mm thick cement plaster 1:4 mix on fair faces of brick work or concrete surfaces at any height all complete |
| 27 | Sheet glass : M & L for providing sheel glass 4.8 mm thickness, exc. 05 sqm in each pane, any shape glazed with oil putty all complete. |
| 28 | Wood painting two coat: M & L for applying two coats of synthetic enamel paint finished glossy 1st quality; Make: Asian / Berger / ICI or substantially equivalent make,over a coat of primer after necessary preparation of old wood surfaces of any description over 10 cm width or girth all complete |
| 29 | Steel painting two coat: M & L for applying two coats of synthetic enamel paint finished glossy of 1st quality; Make: Asian / Berger / ICI or substantially equivalent make, and approved shade over a coat of priming with red lead primer after necessary preparation of new decorated steel surfaces of any description over 10 cm width or girth all complete. |
| 30 | Single brick flat soling : M & L for providing single brick flat soling with well burnt soling brick including filling of interstices with white sand all complete. |
| 31 | Dismantling steel work : Labour only for dismantling wrought iron or mild steel work of any description and in any position and removing the same to store all complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender