Tender For Construction Of Evms & Vvpat Store/Warehouse (Category - 1) At Faridkot.
Tender Value
2.79 Crore
Estimated cost
Bid Submission
28 Sep 2026
11 days left
EMD
5.59 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridkot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Evms & Vvpat Store/Warehouse (Category - 1) At Faridkot.
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R Faridkot Name of Work :- Construction Of EVM'S & VVPAT Store/Warehouse (Category - 1) At Faridkot. Contract No: Civil Works Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Work Name Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Civil Work |
| 3 | Excavatiion in soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimminng bottom and side slopes, inn accordannce with requirement of lines, grade and cross sections, including all lifts annd combined lead up to 30 m. Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating leadupto 30 metres |
| 4 | Providingand applyingAnti Termite Treatment using pre constructional chemical treatment measuresasper IS- 6313- 2001(Part 2)& usingChemical containg chloropyrifos systemic insecticide diluted to manufacturer's specifications (i) In foundationpits, by treating the bottom& sides upto height of 300mmby uniformlysprayingsolution@5Litre/Sqm(ii) In therefillearthonbothsidesofallbuiltupwalls@ 7.5Litre/Runningmeter (width-300mm,depth- 450mm ) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidatedearthwithintheouterperimeter@5 Litre solution per Sqm. |
| 5 | Cement concrete 1:4:8 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 6 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 7 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at1.65 Kg per sqm laid hot and sanded |
| 8 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 9 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 10 | Extra for First Floor |
| 11 | Extra for Second Floor |
| 12 | Extra for Third Floor |
| 13 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 14 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 15 | Extra for First Floor |
| 16 | Extra for Second Floor |
| 17 | Extra for Third Floor |
| 18 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. |
| 19 | Extra for First Floor |
| 20 | Extra for Second Floor |
| 21 | Extra for Third Floor |
| 22 | Centering and shuttering for columns (Square or rectangular or poly gonal in plain) |
| 23 | Extra for First Floor |
| 24 | Extra for Second Floor |
| 25 | Extra for Third Floor |
| 26 | Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. |
| 27 | Extra for First Floor |
| 28 | Extra for Second Floor |
| 29 | Extra for Third Floor |
| 30 | Centring and shuttering for parapet, fascias and other similar items including edges. |
| 31 | Extra for First Floor |
| 32 | Extra for Second Floor |
| 33 | Extra for Third Floor |
| 34 | Centring and shuttering for stair cases with sloping with soffits including risers and stringers. |
| 35 | Extra for First Floor |
| 36 | Extra for Second Floor |
| 37 | First class burnt brick laid in cement sand mortor 1:6 in foundation and plinth. |
| 38 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. |
| 39 | Extra for First Floor |
| 40 | Extra for Second Floor |
| 41 | Extra for Third Floor |
| 42 | Extra for Fourth Floor |
| 43 | Providingand layinginsuperstructure for first storey factory made with vibro-hydraulic compactionmachine precast Hollowblockofcementconcretesettinginpositionwithcementmortar1:3(1cement:3coursesand) including cost of hosting, centering and shuttering complete as per IS:2185 (Part-1): 2005. |
| 44 | Extra for First Floor |
| 45 | Extra for Second Floor |
| 46 | Extra for Third Floor |
| 47 | 115mm thick brick wall in cement sand mortar1:4 without reinforcement in superstructure |
| 48 | Extra for First Floor |
| 49 | 12.5 mm thick cement plaster 1:5 |
| 50 | Extra for First Floor |
| 51 | Extra for Second Floor |
| 52 | Extra for Third Floor |
| 53 | 20mm thick cement plaster 1:5 in two coat work |
| 54 | Extra for First Floor |
| 55 | Extra for Second Floor |
| 56 | Extra for Third Floor |
| 57 | 12.5 mm thick cement plaster 1:4 |
| 58 | Extra for First Floor |
| 59 | Extra for Second Floor |
| 60 | Extra for Third Floor |
| 61 | 20mm thick cement plaster 1:4 in two coat work |
| 62 | Extra for First Floor |
| 63 | Extra for Second Floor |
| 64 | Extra for Third Floor |
| 65 | extra rate for smooth surface of ceiling |
| 66 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. |
| 67 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. |
| 68 | Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. |
| 69 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 |
| 70 | Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 |
| 71 | Providing and fixing in position gratings 150mm x 150mm for gully trap. PVC grating (P.T.M.T.) |
| 72 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 73 | Extra for Second Floor |
| 74 | Extra for Third Floor |
| 75 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 76 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers including ramming, watering and consolidated lead upto 1000 metres |
| 77 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating leadupto 30 metres |
| 78 | Base course of floor consisting of100mm thick cement concrete1:8:16 with stone aggregate 40mm gauge and100mm Fine sand filling using mechanical mixer for mixing of material |
| 79 | Screed of 50mm thick cement concrete 1:8:16 with stone aggregate to be laid below the topping using mechanical mixer for mixing of material |
| 80 | Extra for First Floor |
| 81 | Extra for Second Floor |
| 82 | Extra for Third Floor |
| 83 | Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 84 | Extra for First Floor |
| 85 | Extra for Second Floor |
| 86 | Extra for Third Floor |
| 87 | Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing |
| 88 | Extra for First Floor |
| 89 | Extra for Second Floor |
| 90 | Extra for Third Floor |
| 91 | Providing and laying vitrified floor tiles Size 600x600 mm in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 92 | Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications |
| 93 | 20mm thick grey polished skirting or dado consisting of bottom layer of 16mm thick cement sand plaster 1.3 and finished 3mm thick topping of neat cement rubbed and polished including rounding of junction with floors. |
| 94 | Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge. |
| 95 | Extralabour forprojectednosingofstaircaseof any shape and design. |
| 96 | Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness andcolouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects. |
| 97 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillarslaid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 98 | Supplying and fixing of Japani sheet frames (Chowkat)consistingof18gauge(1.25mm) thick steel sheet of the specified section (standard designlatest), includingironlugs(holdfasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower boltsand finished, fixed in position including the cost of cement concrete1:3:6for fillingintheframeandcement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-inharge . Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter |
| 99 | Supplying and fixing of Japani sheet frames (Chowkat)consistingof18gauge(1.25mm) thick steel sheet of the specified section (standard designlatest), includingironlugs(holdfasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower boltsand finished, fixed in position including the cost of cement concrete1:3:6for fillingintheframeandcement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-inharge .Doorandwindowframeof size113mmx60mmx with 35mm wide single rebate |
| 100 | Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flash- welded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) |
| 101 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. |
| 102 | Supplying and fixing glass panes with glazingclips and special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqmexceeding 0.4 sqm of area |
| 103 | Extra for providing & fixing Steel beading of approved shape steel tube beading size 12mm X 12mm, 18 gauge of approved shape and section with screw for fixing of glass panes instead of glazing clips and metal slash putty in steel doors , windows & Ventilators complete in all respect |
| 104 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 105 | Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed) |
| 106 | Extra for providing mechanical device, chain and crank operation, for operating rolling shutter, exceeding 11.20 sqm in area, of the rolling shutter |
| 107 | Iron grated doors, including pintle hinges & arrangements. |
| 108 | Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects. |
| 109 | Providing&fixing16gaugestainlesssteel pipe railingof grade304dulyfixedonstepswiththehelpofboltsgroutedonstepswithhandrailand newel post of 50mmdiaStainless steel pipe, Balustersof 40mmdiaStainlesssteel pipeand guard3Nosof 15mmdiaStainlessSteel pipe complete in all respect |
| 110 | Cold twisted detormed (Ribbed/Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works,where not including in the complete rate of RCC including bending and binding placing in position complete |
| 111 | Extra Rate For First Floor |
| 112 | Extra Rate For Second Floor |
| 113 | Extra Rate For Third Floor |
| 114 | Factory manufactured Solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS-2202-1 (1999) (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35 mm thick |
| 115 | Wire gauge Hollock wood door shutter without springs housed in chowkhat. (a)35mm thick |
| 116 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm |
| 117 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a)300mm x 16mm |
| 118 | Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete |
| 119 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851mm to 1000mm) |
| 120 | Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture.M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020- 1998,Drawings and to the entire satisfaction of engineer-in-charge. |
| 121 | Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge. |
| 122 | Providing andapplying plaster of paris (ISI markedsuchasJK,Kohinoor,Maharajaetc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge. |
| 123 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 124 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 125 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 126 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 127 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 128 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 129 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 130 | Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 131 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mmcentre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GIperimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mmlong dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support systemshall be pre-painted with polyester baked paint, for allheights. The work shall be carried out as perspecifications, drawings and as per directions of theengineer-in-charge.With 16 mm thick beveled tegular mineralfibre false ceiling tile (NRC 0.55 to 0.6)size 595x595 mm |
| 132 | Providing and fixing tiled false ceiling of specifiedmaterials of size 595x595 mm ( GI Metal Ceiling Lay inplain Tegular edge Global white color tiles of size595x595 mm, and 0.5 mm thick with 8 mm drop; madeof G I sheet having galvanizing of 100 gms/sqm (bothsides inclusive) and electro statically polyester powdercoated of thickness 60 microns(minimum), includingfactory painted after bending.) in true horizontal level,suspended on inter locking metal grid of hot dippedgalvanized steel sections ( galvanized @ 120 grams/sqm, both side inclusive) consisting of main \\"T\\" runnerwith suitably spaced joints to get required length and ofsize 24x38 mm made from 0.30 mm thick (minimum)sheet, spaced at 1200 mm center to center and cross\\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum)sheet, 1200 mm long spaced between main \\"T\\" at 600mm center to center to form a grid of 1200x600 mm andsecondary cross \\"T\\" of length 600 mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to beinterlocked at middle of the 1200x600 mm panel to formgrids of 600x600 mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture inthe grid including, required cutting/making, opening forservices like diffusers, grills, light fittings, fixtures, smokedetectors etc. Main \\"T\\" runners to be suspended fromceiling using GI slotted cleats of size 27 x 37 x 25 x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm longdash fasteners, 4 mm GI adjustable rods withgalvanised butterfly level clips of size 85 x 30 x 0.8 mmspaced at 1200 mm center to center along main T,bottom exposed width of 24 mm of all Tsections shall bepre-painted with polyester paint, all complete for allheights as per specifications, drawings and as directedby Engineer-in-charge. |
| 133 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 134 | Cement concrete 1:4:8 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 135 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth |
| 136 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating leadupto 30 metres |
| 137 | Base course of floor consisting of100mm thick cement concrete1:8:16 with stone aggregate 40mm gauge and100mm Fine sand filling using mechanical mixer for mixing of material |
| 138 | Conglomerate floor 40 mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material |
| 139 | 12.5 mm thick cement plaster 1:5 |
| 140 | Construction of Check Post |
| 141 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 142 | Cement concrete 1:5:10 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 143 | First class burnt brick laid in cement sand mortor 1:6 in foundation and plinth. |
| 144 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at1.65 Kg per sqm laid hot and sanded |
| 145 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. |
| 146 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 147 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 148 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 149 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. |
| 150 | Centring and shuttering for parapet, fascias and other similar items including edges. |
| 151 | extra rate for smooth surface of ceiling |
| 152 | 12.5 mm thick cement plaster 1:5 |
| 153 | 20mm thick cement plaster 1:5 in two coat work |
| 154 | 12.5 mm thick cement plaster 1:4 |
| 155 | 20mm thick cement plaster 1:4 in two coat work |
| 156 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. |
| 157 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. |
| 158 | Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. |
| 159 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 |
| 160 | Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 |
| 161 | Providing and fixing in position gratings 150mm x 150mm for gully trap. PVC grating (P.T.M.T.) |
| 162 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 163 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 164 | Supplying and fixing of Japani sheet frames (Chowkat)consistingof18gauge(1.25mm) thick steel sheet of the specified section (standard designlatest), includingironlugs(holdfasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower boltsand finished, fixed in position including the cost of cement concrete1:3:6for fillingintheframeandcement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-inharge .Doorandwindowframeof size113mmx60mmx with 35mm wide single rebate |
| 165 | Supplying and fixing of Japani sheet frames (Chowkat)consistingof18gauge(1.25mm) thick steel sheet of the specified section (standard designlatest), includingironlugs(holdfasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower boltsand finished, fixed in position including the cost of cement concrete1:3:6for fillingintheframeandcement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-inharge . Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter |
| 166 | Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flash- welded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) |
| 167 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. |
| 168 | Supplying and fixing glass panes with glazingclips and special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqmexceeding 0.4 sqm of area |
| 169 | Extra for providing & fixing Steel beading of approved shape steel tube beading size 12mm X 12mm, 18 gauge of approved shape and section with screw for fixing of glass panes instead of glazing clips and metal slash putty in steel doors , windows & Ventilators complete in all respect |
| 170 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 171 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers including ramming, watering and consolidated lead upto 1000 metres |
| 172 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating leadupto 30 metres |
| 173 | Base course of floor consisting of100mm thick cement concrete1:8:16 with stone aggregate 40mm gauge and100mm Fine sand filling using mechanical mixer for mixing of material |
| 174 | Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 175 | Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing |
| 176 | Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness andcolouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects. |
| 177 | Coloured Granite stone tiles 15mm to 20mm thickin skirting, risers of steps, dado walls and pillarslaid in 12.5mm thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with neatcement slurry mixed with pigment to match theshade of stone, including rubbing and polishingincluding labour for fixing dowel pins and cramps. |
| 178 | Factory manufactured Solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS-2202-1 (1999) (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35 mm thick |
| 179 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm |
| 180 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a)300mm x 16mm |
| 181 | Cold twisted detormed (Ribbed/Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works,where not including in the complete rate of RCC including bending and binding placing in position complete |
| 182 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 183 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 184 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 185 | Providing andapplying plaster of paris (ISI markedsuchasJK,Kohinoor,Maharajaetc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge. |
| 186 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 187 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 188 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 189 | Finishing walls with Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.67litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 190 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 191 | Cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 192 | 115 mm thick brick wall in cement sand mortar1:4 without reinforcement in foundations and plinth |
| 193 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers including ramming, watering and consolidated lead upto 1000 metres |
| 194 | Base course of floor consisting of100mm thick cement concrete1:8:16 with stone aggregate 40mm gauge and100mm Fine sand filling using mechanical mixer for mixing of material |
| 195 | Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material |
| 196 | 12.5 mm thick cement plaster 1:5 |
| 197 | Construction of Evm Store Room |
| 198 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 199 | Cement concrete 1:5:10 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 200 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth |
| 201 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. |
| 202 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 203 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. |
| 204 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 205 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 206 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 207 | Cold twisted detormed (Ribbed/Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works,where not including in the complete rate of RCC including bending and binding placing in position complete |
| 208 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at1.65 Kg per sqm laid hot and sanded |
| 209 | 12.5 mm thick cement plaster 1:5 |
| 210 | 20mm thick cement plaster 1:5 in two coat work |
| 211 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 212 | Providing andapplying plaster of paris (ISI markedsuchasJK,Kohinoor,Maharajaetc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge. |
| 213 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 214 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 215 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 216 | Supplying and fixing of Japani sheet frames (Chowkat)consistingof18gauge(1.25mm) thick steel sheet of the specified section (standard designlatest), includingironlugs(holdfasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower boltsand finished, fixed in position including the cost of cement concrete1:3:6for fillingintheframeandcement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-inharge .Doorandwindowframeof size113mmx60mmx with 35mm wide single rebate |
| 217 | Supplying and fixing of Japani sheet frames (Chowkat)consistingof18gauge(1.25mm) thick steel sheet of the specified section (standard designlatest), includingironlugs(holdfasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower boltsand finished, fixed in position including the cost of cement concrete1:3:6for fillingintheframeandcement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-inharge . Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter |
| 218 | Factory manufactured Solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS-2202-1 (1999) (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35 mm thick |
| 219 | Wire gauge Hollock wood door shutter without springs housed in chowkhat. (a)35mm thick |
| 220 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. (a) (ii) panelled, glazed or glazed and panelled.35mm thick |
| 221 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b) Glazing area above 0.09 sqm 5.0mm thick Plate glass (INDIAN) |
| 222 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851mm to 1000mm) |
| 223 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a)300mm x 16mm |
| 224 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm |
| 225 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 226 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 227 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 228 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 229 | Providing&fixing16gaugestainlesssteel pipe railingof grade304dulyfixedonstepswiththehelpofboltsgroutedonstepswithhandrailand newel post of 50mmdiaStainless steel pipe, Balustersof 40mmdiaStainlesssteel pipeand guard3Nosof 15mmdiaStainlessSteel pipe complete in all respect |
| 230 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating leadupto 30 metres |
| 231 | Base course of floor consisting of100mm thick cement concrete1:8:16 with stone aggregate 40mm gauge and100mm Fine sand filling using mechanical mixer for mixing of material |
| 232 | Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge. |
| 233 | Providing and laying vitrified floor tiles Size 600x600 mm of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. |
| 234 | Groutingthejointsof flooringtileshavingjointsof 3mmwidth,usingepoxygroutmixof0.70kgof organiccoatedfillerofdesiredshade(0.10kgof hardenerand0.20kgof resinper kg), including filling / groutingand finishing complete as per direction of Engineer-in-charge.Size 600x600 mm. |
| 235 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 |
| 236 | Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 |
| 237 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 238 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. |
| 239 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. |
| 240 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 241 | Construction of Boundry wall with Grill on Top |
| 242 | Excavation in Soil (any type) using HydraulicExcavator CK 90 Excavation with hydraulicexcavator of 0.9 cum bucket capacity includingcutting trimming bottom and side slopes, inaccordance with requirements of lines, gradesand cross sections, including all lift and combinedlead up to 30 mtr.Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating leadupto 30 metres |
| 243 | Cement concrete 1:5:10 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 244 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 245 | Centering and shuttering for columns (Square or rectangular or poly gonal in plain) |
| 246 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 247 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 248 | Cold twisted detormed (Ribbed/Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works,where not including in the complete rate of RCC including bending and binding placing in position complete |
| 249 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth |
| 250 | Providingand layinginsuperstructure for first storey factory made with vibro-hydraulic compactionmachine precast Hollowblockofcementconcretesettinginpositionwithcementmortar1:3(1cement:3coursesand) including cost of hosting, centering and shuttering complete as per IS:2185 (Part-1): 2005. |
| 251 | 12.5 mm thick cement plaster 1:4 |
| 252 | 20mm thick cement plaster 1:4 in two coat work |
| 253 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 254 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 255 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 256 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 257 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 258 | Iron grated doors, including pintle hinges & arrangements. |
| 259 | Construction of internal roads and pavements with pavers for parking |
| 260 | Cement concrete 1:5:10 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 261 | Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications |
| 262 | Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications |
| 263 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish withstrong vibratory process or with vibro- hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS Code: 15658 (2006) |
| 264 | Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours. |
| 265 | Iron Racks for VVPAT storage |
| 266 | Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span |
| 267 | Public Health Work |
| 268 | Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge )including cutting, jointing, wastage, but excluding cost of lead jointing. Type - B 110mm o/d SWR UPVC pipe line laid complete |
| 269 | 90mm o/d SWR UPVC pipe line laid complete |
| 270 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. qty as per Table Atached For 110mm o/d pipes Single Tee With Door |
| 271 | Elbow 90 degree ( all side socketed) |
| 272 | Coupler |
| 273 | Floor trap 110mm x 110mm Deep |
| 274 | For 90mm i/d pipes Single Tee With Door |
| 275 | Elbow 90 degree ( all side socketed) |
| 276 | Coupler |
| 277 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)110mm o/d |
| 278 | 90mm o/d |
| 279 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm |
| 280 | Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal |
| 281 | Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in built up area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. Earth work upto 1.5 m. Depth All classes of soil except rocky for 160 mm Sewer Line IC to MH 12.00 m x 0.62 m x 1.20 m for 200 mm Sewer Line MH to MH 55.00 m x 0.62 m x 1.30 m |
| 282 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. Type A 160mm o/d SWR UPVC pipe line laid complete |
| 283 | 200mm o/d SWR UPVC pipe line laid complete |
| 284 | Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work. For covering Sewer Line Type IIFor Sewer Line 160 mm i/d (Type-I) as per Detail attachedFor Sewer Line 200 mm i/d (Type-I) as per Detail attached |
| 285 | Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 63.464 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. |
| 286 | Making connection of newly laid sewer in walls of existing manhole of fully chargesewer including cost of pluging sewer, desilting, removal of sullage water andmaking good of khudda Sewer connections upto 300 mm id |
| 287 | Sanitary Installation |
| 288 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer in charge ) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer in charge. |
| 289 | Providing and fixing jet spray with 2'-6\\" long PVC pipe.With PTMT nut |
| 290 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 291 | Providing and fixing in position vitreous Chinaware white large flat back or angular lipped front urinal 610 mm high of approved make (to the approval of the Engineer-in-charge) (610 mm x 410 mm x 380mm) consisting of C.P. waste 32 mm dia and C.P. brass spreader, complete. |
| 292 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap complete in all respect.Size 550 mm x 400 mm x 815 mm |
| 293 | Providing and fixing vitreous chinaware pedestal of approved make ( to the approval of Engineer-in-charge) for washhand basin complete in all respect. Vitreous chinaware standard white pedestal for wash hand basin. |
| 294 | Providing & fixing in position best Indian make PVC flexible tube connection.PVC tube connection of size 15 mm x 300 mm with CP nut |
| 295 | Providing and fixing PVC waste pipe 32mm complete in all respect. |
| 296 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P. brass towel Ring |
| 297 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 298 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect.C.P Brass bib cock long body |
| 299 | Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-in-charge). C.P.brass 15mm Angle valve |
| 300 | C.P.brass 15mm Concealed stop cock with flange |
| 301 | Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 302 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. |
| 303 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) Size 600mm x 450mm |
| 304 | Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. C.P. Brass khunti with 3 pegs |
| 305 | Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge) fixed into wall with C.P brass screws complete in all respect.C.P. brass toilet paper holder |
| 306 | Providing and fixing in position best quality stainless steel sinks with complete fitting. Rectangular Sink with Deluxe Border SingleBowl Overall Size 700 mm x 555 mm x 230 mm |
| 307 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Triple Layer Tanks (1000 lt x 1 no) |
| 308 | Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball 50mm i/d 32mm i/d |
| 309 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. G.I. tank nipple 32mm i/d |
| 310 | G.I. tank nipple 50mm i/d |
| 311 | Construction of Platform complete as per Specification & Desired by Engineer in Charge (for 1000 ltr tank) |
| 312 | Internal and External Water Supply System |
| 313 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.SDR 11 CPVC pipes & fittings 20mm o/d |
| 314 | SDR 11 CPVC pipes & fittings 25mm o/d |
| 315 | SDR 11 CPVC pipes & fittings 32mm o/d |
| 316 | SDR 11 CPVC pipes & fittings 50mm o/d |
| 317 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.Size 75 mm x 75 mm |
| 318 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.Through wall 11.43 cm thick |
| 319 | Through wall 22.86 cm thick |
| 320 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.32mm i/d Brass Ball valves |
| 321 | 50mm i/d Brass Ball valves |
| 322 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic,night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. Earth work upto 1.5 m. Depth for All classes of soil except for 80 mm Pipeli rocky 35 m x 0.60 m x 1.10 m |
| 323 | Providing,Laying, fixing&jointingof P.V.C. Pipes as per ISI-4985 (ISImarkedwith the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients cutting, jointing and testing complete as per specifications 90mm o/d pipe of 6 Kgf. / sqcm |
| 324 | Providing & fixing C.I/D.I Flanged end, stem vof SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). Class PN-1 as per ISI 80mm i/d Sluice Valves flanged |
| 325 | Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.Size 0.6 m. x 0.6 m. |
| 326 | MAKING CONNECTION WITH EXISTING PVC PIPE (90mm ) |
| 327 | Flooring and wall tile |
| 328 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material |
| 329 | Providing and laying Rectified Porcelin floor tiles 400 x 400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20 mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete . |
| 330 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 331 | Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.2 no. x 0.70m x 2.93m |
| 332 | Extra labour for projected nosing of stair case of any shape and design. |
| 333 | Air Conditioning System and Water Cooler |
| 334 | Supply, installing and comissioning of BEE 5 star 1.5 ton split type air conditioner ISI marked reputed/equivalent make wall mounted Air Conditioner invertor technology including cordless remote variable speed with 100% copper coil material (evaporator and condensor) for installing ID and OD units on terrace Complete in all respects. |
| 335 | AUTOMATIC VOLTAGE STABLIZER: 4KVASupply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with inputvoltage140-260voltssinglephase AC supply and output voltage 220±5% volts single phase AC supply having main silicon core copper wound stepup transformer with suitablenos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relayand single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp .meter and voltmeter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided: |
| 336 | Providing and Fixing copper pipe and insulation including Indoor to Outdoor Cable For 1.5 tonne split AC- 3 mtr/ each |
| 337 | Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete. uPVC Pipe 10 Kgf/cm2 - 25mm i/d For 1.5 tonne split AC- 3 mtr/ each |
| 338 | Fire Fighting |
| 339 | Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.4.5kg capacity |
| 340 | Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 6kg Capacity |
| 341 | Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nutsbolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS:10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts.150mm internal diameter |
| 342 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.Earth work upto 1.5 m. Depth All classes of soil except rocky For 150mm pipe line as above |
| 343 | SITC of MS PipeProviding, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. (inside building) 25mm internal diameter |
| 344 | 40mm internal diameter |
| 345 | 50mm internal diameter |
| 346 | 65mm internal diameter |
| 347 | 80mm internal diameter |
| 348 | 100mm internal diameter |
| 349 | SITC of Butterfly valveSupplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.80 mm i/d for yard hydrants |
| 350 | 100 mm i/d for Internal Hydrants |
| 351 | Proving & fixing Dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete.100mm i/d check valve |
| 352 | Providing and fixing S.S Pressure Gauge complete as required complete in all respect.Dial diameter 100mm calibration 0-16 Kg |
| 353 | Providing and fixing fire brigade inlet connection of cast iron body with Gun metal 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904. (to be connected to static tank).Four Way inlet connection |
| 354 | Supplying, Installation, Testing and Commissioning of G.M Single headed hydrant valve with instantaneous Gun metal peet coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (TypeA) with blank Gunmetal Cap and chain including orifice plate made of 6mm th Stainless steel to keep the pressure not more than 3.5 per sqcm at any point complete in all respects. For Internal Hydrants and yard hydrant |
| 355 | Supplying, Installation, Testing and Commissioning 63 mm dia gun-metal Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Gun metal nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required. For Internal Hydrants and yard hydrant |
| 356 | Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A, IS:636, 63mm dia x 15m long with gunmetal male & female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required. |
| 357 | Supplying, Installation, Testing and Commissioning of Non-percolating flexible CP HOSE as per IS:8423 / 1994 ISI marked63mm dia x 15 m long complete with instantaneous type gun-metal 63 mm dia male & female coupling (IS: 903) bound and riveted to hose pipes. |
| 358 | Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 meter long type-2, hose reel Drum with bracket as per IS:884, 20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with main pipe complete in all respect. |
| 359 | Supplying, Installation, Testing and Commissioning standard Fire Man's axe with heavy insulated rubber conforming to IS 936 complete in all respect. |
| 360 | Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc.900 mm wide x 600 mm high x 500 mm deep Size (for Yard Hydrant) |
| 361 | 600 mm wide x 600 mm high x 300 mm deep Size - (for RRL Reel) |
| 362 | Providing & fixing Fire Hydrants with jointing including all carriages complete. (without Fire Hydrant surface box) Size 80mm complete in all respect.C.I Fire Hydrants S.V. Type IS-909 for Internal Hydrants |
| 363 | C.I Fire Hydrants 1S-908 for Yard Hydrants |
| 364 | Supplying & fixing air vessel made out of 250mm. Dia, 8 mm thick MS sheet, 1200mm height with air release valves on top and flanged connection to risers, drain arrangements with 25 mm dia gunmetal wheel valves, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required |
| 365 | Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all respect |
| 366 | Supplying and Installation control valve C/W water motor gong complete with alarm Valve, constant trim, water motor bell, 2No. Pressure Gauge. All parts UL listed. complete in all respect. 100 mm control valve |
| 367 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).Class PN-1 as per IS 160 mm i/d Sluice Valves flanged |
| 368 | Supplying and Fixing Pendant / Upright type sprinkler with quartzoid bulb, operating temperature 68/79 degree centigrade of15 mm dia orifice sprinler head toapprovedby UL/S |
| 369 | Supplying and Fixing SidewallSprinkler rated at 68 / 79degreecentigrade, quartzoidbulb type, 15mm dia orifice sprinler head to approved by UL/SN complete in all respect. |
| 370 | XLPE INSULATED ARMOURED CABLES (UNDERGROUND):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1metre below ground level including excavation, sand cushioning, covering with sand & First Class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-Overall size 16sq.mm (3Core) Armoured (Underground) |
| 371 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks 10000 ltr Capacity |
| 372 | Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball 50mm i/d |
| 373 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. G.I. tank nipple 40mm i/d |
| 374 | G.I. tank nipple 50mm i/d |
| 375 | Construction of Plateform complete as per specification & as desired by Enginer-in-charge For 10000 ltr Water Tank |
| 376 | Pressure PumpSupply of Terrace Pump set System Kirloskar make End Suction pump in back pull out design C.I Casing, Bronze impeller and EN8 shaft, Mechanical Seal with coupled on common base plate to Kirloskar/Crompton make 9.3 KW/ 12.5 HP, 2900 RPM TEFC sq. cage Fire induction motor suitable for 3 phase, 415 volt, 50 HZ AC supply conforming to through suitable coupling.Total Head - 60 Mtr, Discharge - 450 LPM |
| 377 | Jockey PumpProviding & Fixing of Jockey Pump Set Kirloskar make End Suction pump in back pull out design C.I Casing, Bronze impeller and EN8 shaft, Mechanical Seal with coupled on common base plate to Kirloskar/Crompton make 7.5 KW / 10 HP, 2900 RPM TEFC sq. cage Fire induction motor suitable for 3 phase, 415 volt, 50 HZ AC supply conforming to through suitable coupling.Total Head - 60 Mtr, Discharge - 180 LPM |
| 378 | Diesel EngineProviding & Fixing of Engine Driven Kirloskar make factory assembled diesel engine driven End Suction pump set comprising of Kirloskar make Pump pull out design C.I casing, Bronze impeller and EN8 shaft, Mechanical Seal arrangement coupled on common MS fabricated base frame to vertical water cooled diesel engine complete with start arrangement, air cleaner, exhaust silencer (with out piping), fuel filter. Engine with twin belt driver radiator and complete with engine control panel, Total Head - 60 Mtr, Discharge - 2280 LPM. |
| 379 | Electric PumpSupply of Main Pump set System Kirloskar make End Suction pump in back pull out design C.I Casing, Bronze impeller and EN8 shaft, Mechanical Seal with coupled on common base plate to Kirloskar/Crompton make 37 KW/50 HP, 2900 RPM TEFC sq. cage Fire induction motor suitable for 3 phase, 415 volt, 50 HZ AC supply conforming to through suitable coupling.Total Head - 60 Mtr, Discharge - 2280 LPM |
| 380 | Providing & Fixing of Main Control Panel Suitable for Fire Pump set Fitted with L&T /Havells Switch Gear Fitted in MS Powder coated Box. |
| 381 | Providing & Fixing of_Accessories Fuel Tank 200 Ltr Battery, AVM Pads, Coolent. |
| 382 | Providing UGSR 100000 ltr including pump house |
| 383 | Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. Depth upto 1.50 m B.G.L. |
| 384 | Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type |
| 385 | Reinforced cement concrete M-30 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth including carriage |
| 386 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 387 | Extra rate for Smooth Surface of RCC |
| 388 | Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete |
| 389 | Extra rate for using steel produced in integrated plant from original ores complete in all respect as per the directions of Engineer-in-charge. Qty same as above |
| 390 | Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pillasters, buttersses etc when curved. Ground Floor |
| 391 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 392 | Extra rate for First Floor |
| 393 | Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels Ground Floor Beam |
| 394 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. Ground Floor |
| 395 | First Floor Parapet |
| 396 | Extra rate for First Floor |
| 397 | 12.5mm thick cement plaster 1:5. Ground Floor Room |
| 398 | 12.5mm thick cement plaster 1:4. First Floor |
| 399 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs completeDoors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter |
| 400 | Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitred and electrically flash-welded, with iron fittings incluidng necessary iron handles,hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire guage) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire guage and grill will be paid as per respective items) W |
| 401 | Extra for providing & fixing Steel Tube beading size 12mm x 12mm, 18 guage of approved shape and section with screw for fixing of glass panes in stead of glazing clips and metal slash putty in steel doors, windows & Ventilators complete in all respect Area same as steel Window |
| 402 | Wire gauge fixed on steel windows of standard rolled steel section, with 3mm thick flat iron cover moulding of 12.5mm width, fixed with machine screws, complete in all respects. Take 50% area of Steel Windows |
| 403 | Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position. Qty same as steel window |
| 404 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqmexceeding 0.4 sqm of area |
| 405 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-202 Part-I) 1999,Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-35mm thick |
| 406 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)For shutter area above 0.50 sqm |
| 407 | Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300mm x 16mm Flush Door + PVC Door |
| 408 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. Qty same as per M.S Grills Qty same as per Steel Glazing Qty same as per wire guage |
| 409 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 410 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 411 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 412 | Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 413 | Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).R.C.C. Manhole cover 560mm i/d RCC man hole cover with frame as per ISI medium duty |
| 414 | Foot Rest for Manhole.Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design. |
| 415 | Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material First Floor Room |
| 416 | Extra rate for First Floor |
| 417 | Conglomerate floor 50mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material). Flooring Stair Outside |
| 418 | 20mm thick grey polished skirting or dado consisting of bottom layer of 16mm thick cement sand plaster 1.3 and finished 3mm thick topping of neat cement rubbed and polished including rounding of junction with floors. |
| 419 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 420 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 421 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS ClampU-PVC pipes (working pressure 4kgf. / sqcm)pipe 110 mm dia. |
| 422 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.UPVC 110 mm bend |
| 423 | Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. One per 6 Rft |
| 424 | Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. |
| 425 | Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3. |
| 426 | Providing and fixing in position gratings 150mm x 150mm for gully trap.PVC grating |
| 427 | Providing & installing,testing & commisioning of 1 no electrically driven Boosting Pump setof 5 bhp capable of delivering 252 LPM against a head of 30 mtr complete in all respect as per specifications |
| 428 | Providing & fixing 2.50mm2 core cable to Submersible Pump complete in all respect as per specifications |
| 429 | Providing & installation of smart starter panel board of 5 bhpcomplete in all respect. |
| 430 | Tubewell |
| 431 | Boring with 150mm i/d casing pipe for tubewell in all soils except ordinary hard rocks requiring balsting including removing the casing pipe after the tube well is lowered and tested equipement as required such as hand boring machine and its accessory, transportation to site and vice versa etc complete in all respect. Boring with 150mm i/d housing pipe |
| 432 | Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818-2010, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer – in- charge. 100mm nominal size dia |
| 433 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (100mm nomial size dia |
| 434 | Supplying & Fixing of uPVC pipe bail plug suitable for 100 mm dia UPVC casing pipe having thickness of socket as 12 mm ,length 100 mm & base plate of 8 mm thick complete in all respect. |
| 435 | Supplying and fixing of well cap having threads to fix on housing pipe.Complete in all respects (100mm i/d) |
| 436 | Supplying and fixing of mild steel clamps of size 150 mm x 12mm made out of MS Flat 1.52m) long, suitable to fit housing pipe including the cost Nut & Bolt of Suitable size complete in all respects |
| 437 | Supplying at site wooden box of suitable size with lid and locking arrangement for preserving strata sample collected from the bore. |
| 438 | Testing of Water Sample for heavy metal from approved laboratory (Toxic material sucha as arsenic, lead, mercury, presticide etc.) |
| 439 | Development and stabilizing of the tube-well with Submersible Pump of required capacity as directed by the Engineer-in-charge including the cost of tools appliances and consumable to the satisfaction of Engineer-in-charge. |
| 440 | Collection of water sample from different strata and testing of sample from approved laboratory |
| 441 | Pumping Machinery |
| 442 | Providing & installing, testing & commisioning of 1 no electrically driven Submersible Pump set of KSB or equivalent make of capable of deliveringRate of Motor with Pump |
| 443 | 1.5 LPS against a head of 35 mtr along with electric panel board consistingof electrical appliances such as direct on line starter (DOL Starter),Main Switch, VM, Ampere Meter, ELCB, Shunt capacitor. Single phase, preventer, Indicating lamps, Kit-Kat etc. including M.S column Panel Board |
| 444 | Pipe of IS 1239-2004 medium class suitable size 40mm mm & length 15mtr Submersible cable Size 2.50mm 2 |
| 445 | (in 3.00 mtr lengths each with flanges,screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable of 40 mtr length and 2.50 mm2 size as per IS694-1990 reaffirmed 2000 complete in all respects Column Pipe (H.D.P.E ) 40mm mm i/d |
| 446 | Electrical Works |
| 447 | RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGWPVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 448 | Wiring air conditioner supply terminal point recessed in wall etc., complete withpowder coated/anodized concealed metal boxes required fo suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starte 25Amp. (2Module), covered with Frame Plate and other petty material etc including the cost of above material, cutting and filling up of chases (with finishingthe surface):- |
| 449 | Wiring AC supply terminal point having 1No. 25Amp. universal Socke(shuttered) erected at AC height and 1No. Motor starter 25Amp. erected a switchboard height. |
| 450 | RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVCCONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 451 | Wiring Computer supply terminal points recessed in wall etc., complete withpowder coated/anodized concealed metal boxes required fo suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shukered), 16/20Amp. combined/ universal Socke (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other peky material etc. including the cost of above material, cuking and filling up of chases (with finishing the surface):- |
| 452 | Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socke(shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modula accessories). |
| 453 | RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS(USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 454 | Supply and erection of TV socket, Telephone socket and Networking socket pointsin powder coated/anodized concealed metal boxes recessed in wall required fo suitable number of modules (Modular accessories) for having TV sockets Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material cuking and filling up of chases (with finishing the surface):- |
| 455 | Wiring Networking socket point RJ45 (one module) |
| 456 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULARSWITCHES: |
| 457 | Wiring in PVC insulated copper conductor single core FR cable (ISmarked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc. complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modula accessories) for having Step type electronic fan regulators (two module 100waks, bell push, 6Amp. 2/3 universal socket (shuttered) 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1/z\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm 1100voIts grade (For 6Amp. wall socket & plug control point) and othe petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 458 | Wiring fan point (With fan box) |
| 459 | Wiring light point |
| 460 | Wiring call-bell point |
| 461 | Wiring 6Amp. wall socket point |
| 462 | Wiring 6Amp. Plug control comprising wall socket point |
| 463 | Wiring 16/20Amp. power plug control point |
| 464 | Wiring light point with double control switches. |
| 465 | SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: |
| 466 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overal1.5sq. mm, 1100voIts grade to be laid in heavy gauge PVC conduit pipe 20mm 25mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) fo having Step type electronic fan regulators (two module) 100waks, bell push, 6Amp 2/3 universal socket (shukered), 16/20Amp. combined/ universal Socket (shuttered) 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), MS saddle clamp, PVC Circular junction Boxes (Four way 1/z\\" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100voIts grade (For 6Amp. wall socket & plug control point) and other peky material etc. including the cost of above material and painting as required:- |
| 467 | Wiring light point |
| 468 | Wiring 16/20Amp. power plug control point |
| 469 | PVC INSULATED FR COPPER CONDUCTOR CABLES: |
| 470 | Supply and erection of PVC insulated FR single core Unsheathed copper conductocable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-incharqe - |
| 471 | Overall size 1.5sq.mm (Un-sheathed) |
| 472 | Overall size 2.5sq.mm (Un-sheathed) |
| 473 | Overall size 4sq.mm (Un-sheathed) |
| 474 | Overall size 6sq.mm (Un-sheathed) |
| 475 | Overall size 10sq.mm (Un-sheathed) |
| 476 | Overall size 16sq.mm (Un-sheathed) |
| 477 | Overall size 70sq.mm (Un-sheathed) |
| 478 | XLPE INSULATED UN-ARMOURED CABLES (LOOSE): |
| 479 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathedUn-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- |
| 480 | Overall size 16sq.mm (4Core) Un-armoured (Loose) |
| 481 | Overall size 50sq.mm (3'/ Core) Un-armoured (Loose) |
| 482 | XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): |
| 483 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathedUn-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- |
| 484 | Overall size 16sq.mm (4Core) Un-armoured (On-Surface) |
| 485 | HEAVY GAUGE WELDED CONDUIT PIPES: |
| 486 | Supply & erection of Heavy guage welded conduit pipe (ISI marked) as peIS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, G saddle clamps and other peky materials etc., where necessary including painting as per PWD General Specifications:- |
| 487 | Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White paintedsuspension rod for ceiling fan. |
| 488 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: |
| 489 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPEpipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junctionboxes, Steel hooks, M.S. saddle clamps and other peky materials etc., as per PWD General Specifications:- |
| 490 | Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 491 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 492 | Heavy Gauge PVC Conduit pipe 32mm dia. (Flushed) |
| 493 | Heavy Gauge PVC Conduit pipe 40mm dia. (Flushed) |
| 494 | 8 SWG COPPER EARTHING |
| 495 | Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. coppethimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole o excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haud covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole oexcavation: |
| 496 | Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mmthick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long |
| 497 | COPPER EARTHING (Upto 14 metre in Lenqth) |
| 498 | Earthing with electrolytic Copper Tape riveted (with 5Nos. copper rivets)/Steel Nut &bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length)G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (Fo pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- |
| 499 | Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length) |
| 500 | COPPER EARTHING STRIP (As Additional Length): |
| 501 | Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) withpetty material as required etc.:- |
| 502 | Additional Length 20mm x 3mm thick Copper Tape |
| 503 | Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.Ipipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:- |
| 504 | Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (OnSurface) |
| 505 | Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed) |
| 506 | SUPPLY AND ERECTION OF WIRING ACCESSORIES: |
| 507 | Supply and erection of switches, sockets and other accessories (flush piano typemodular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- |
| 508 | Ceiling Rose (Flush Piano type) |
| 509 | MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: |
| 510 | MINIATURE CIRCUIT BREAKERS: |
| 511 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection againsoverload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1 energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 512 | MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 513 | MCB Double Pole 6-32amp. (10kA, Curve-C) |
| 514 | MCB Double Pole 40amp. (10kA, Curve-C) |
| 515 | MCB Triple Pole 40amp. (10kA, Curve-C) |
| 516 | MCB Triple Pole 50, 63amp. (10kA, Curve-C) |
| 517 | MCB Four Pole 40amp. (10kA, Curve-C) |
| 518 | MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 519 | Supply and erection of RCBO (Residual Current Breaker Overload) for Earthleakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 520 | RCBO Four Pole 63amp., Sensitivity 30mA |
| 521 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO'sRCCB's: |
| 522 | Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- |
| 523 | SP&N Double Door Distribution Board 12 way each |
| 524 | TP&N Honzontal Double Door Distribution Board 6 way each |
| 525 | Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable fo flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circui breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:- |
| 526 | TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB upto125amp.) |
| 527 | Supply and erection of sheet metal Cable End Box (Make is same as MCBDistribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD Genera specifications including peky materials etc as required:- |
| 528 | Cable End Box for SPN 12 Way |
| 529 | Cable End Box for TPN 6 Way |
| 530 | Cable End Box for TPN Vertical 4/8/12Way |
| 531 | ON LOAD CHANGEOVER SWITCH (With Sheet Enclosure): |
| 532 | Supply and erection of On Load Change over Switch with advance neutral UNIT insheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connections on both sides of switch with suitable size of thimbles as per PWDGeneral Specifications:- |
| 533 | On Load Change Over Switch Four Pole 125amp., 415voIts |
| 534 | MCCB's (FOR PANELS & SHEET ENCLOSURE): |
| 535 | Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical typein the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides oMCCB with suitable size of thimbles etc:- |
| 536 | MCCB Four Pole 125amp., 415voIts, *25kA Fixed Magnetic and Adjustable ThermaSeking |
| 537 | MCCB's (MOULDED CASE CIRCUIT BREAKER): |
| 538 | Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical typein the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete withG.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- |
| 539 | MCCB Four Pole 125amp., 415voIts, *25kA Fixed Magnetic and Adjustable ThermaSeking |
| 540 | MS SHEET ENCLOSURE FOR MCCB's: |
| 541 | Supply & Erection of indoor type MCCB enclosure of suitable size having provisionfor MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gaske for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bokom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:- |
| 542 | MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotaryhandle (Approx. Size 500mm x 300mm x 200mm) |
| 543 | DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: |
| 544 | Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- |
| 545 | Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) |
| 546 | Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.) |
| 547 | Supply and erection of heavy duty aluminium thimbles/lugs for cable end terminationduly crimped including making necessary connections completely:- |
| 548 | Aluminium thimble cable Core size 10 -16sq.mm |
| 549 | Aluminium thimble cable Core size 25 -35sq.mm |
| 550 | Aluminium thimble cable Core size 50sq.mm |
| 551 | Supply and erection of LED baken 20watt LED (including constant LED driver) withHigh quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per wak and operating voltage between 140 to 270 volt, THD <10% ingress protection IP 20 (as per BIS standards) , surge protection 2.5kv and above (as pe (IS/IEC standards) wattage of each low powers LED less than 1 wak input AC frequency 50 Hz -L 3 % 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as pe Specifications approved by Hon. Tech. Advisor to CM Punjab vide Leker no AT 2021/GL 1410-1422 Dated 06/05/2021. Besides this the lighting fixture manufactures should have in house NABL accredited labortary |
| 552 | Supply and Erection of LED Bulk Head 9/10 Watt Surface mounted Pressure DieCast Aluminium body (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per wak and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per lates BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards wakage of each low power LED less than 1 wak input AC frequency 50 Hz + 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. |
| 553 | Supply and erection of Recessed mounted 18wak LED Downlighter(including LEDdriver) with Pressure Die Cast with efficacy of LED fixture minimum 100 lumens pe wak and operating voltage between 140 to 270 volt, THD <10% ingress protection IP 20 (as per BIS standards) , surge protection 2.5kv and above (as per (IS/IEC standards) wattage of each low powers LED less than 1 watt input AC frequency 50 Hzñ 3 % 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fiking as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no AT-2021/GL 1410-1422 Dated 06/05/2021. Besides this the lighting fixture manufactures should have in house NABL accredited labortary. |
| 554 | Supply and erection of Recessed mounted 36watt LED 2x2 panel (including constanLED driver) with CRCA sheet having with efficacy of LED fixture minimum 100 lumens per wak and operating voltage between 140 to 270 volt, THD <10% ingress protection IP 20 (as per BIS standards) , surge protection 2.5kv and above (as pe (IS/IEC standards) wattage of each low powers LED less than 1 wak input AC frequency 50 Hz -L 3 % 5 year warranty including their drivers and hanging GI wire with top roof complete along with erection of the same with connections, testing etc complete in all respects as approved and desired by the Engineer-in-charge a site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no AT-2021/GL 1410-1422 Dated 06/05/2021. Besides this the lighting fixture manufactures should have in house NABL accredited labortary. |
| 555 | Supply and erection of Heavy duty Exhaust Fans 300mm 900RPM with aluminiumlouver shutter Canon of double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. |
| 556 | Supply and erection of BEE 3-Star rating AC Ceiling Fan 1200mm (48\\") suitable fo230 V single phase with double ball bearing, copper wound, full aluminium body 3Nos. of blades, white in colour. The mounting type is down rod mount. The produc should possess a minimum air deleivery of 210 CMM (approx.). The rated speed o the the product must be minimum of 300 revolutions per minute and 5Nos. o speeds. The product should have a manufcaturer's guarantee/warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset down rod, conopy set, shackle kit, twisted wire etc., including erection & testing o ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as pesatisfcation of the Engineer in-charge at site. |
| 557 | Supply and erection of Wall fan 400mm Swing 16 Inch high speed including flexiblewire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. |
| 558 | Supply,Erection,Testing & Commisioning of Early Streamer Emission (ESE) typeLightning Protection Complete with Lightning Air Terminal. The System should be corrosion resistant stainless steel chrome body capable of working in hazardous atmosphere and protecting against direct LIGHTNING point as well conducting/diverting it to earth completely after tracing the LIGHTNING in advance.As per NF C 17-102:2011 the air terminal should be tested for LIGHTNING impulse curren (10/350 micro sec)=100 KA and for local certification the air terminal should be tested for switching impulse current of 40 KA (8/20 micro sec) as per CPRI with 5 positive and 5 negative impulse. The ESE Terminals shall offer a protection radius of 107mtr High Protection and preferably to be mounted on roof top and center of the building / blocks with the highly insulated polyplastic adaptor with the Mast. complete in all respect as desired by engineer in charge of the work. |
| 559 | Supply and fixing of GI Mast 5 mtr height along with suitable base plate fomounting the terminal along with highly insulated adopter to mount ESE Ai Terminal with the Mast.The Adapter shall have suitable Metal connector Connecting point in such a way the top portion shall be electrically connected to the central tip of the ESE terminal and bottom portion connected to the down conductor stray wires along with support shall be securely fixed with base plate and gauge wires where ever required complete in all respect as desired by engineer in chargeof the work. |
| 560 | Supply and Installation of Lightning Strike Counter (Minimum 6 digit display) of nonresettable (electromechanical) type which allows the automatic counting of the strikes received by the lightning protection system.This information is used to enhance lightning protection security & increase the effectiveness of inspection & maintenance procedures. It should be in IP-65 enclosure with minimum sensitivity o 1KA and maximum capacity 100KA. No external power source is required. It should be installed always 2 mtrs above the ground level complete in all respect as desiredby engineer in charge of the work. |
| 561 | Supply & erection of Test Link of non-corroding,weather proof,water proopolycarbonate IP 65/55 enclosure including providing of 2 nos. of insulated supports with suitable holes prefitted nuts & bolts to fix the down conductor & earth wire.The transparent cover fiked at approximately 500-1000mm from ground level shall be provided on each down conductor complete in all respect as desired by engineer in charge of the work. |
| 562 | Cost of pole foundation with earth work in excavation in foundations trenches etc0.25 meter below ground level, Cement Concrete 1:4:8 with stone ballast Reinforced cement concrete M-20,CoId twisted deformed (Ribbed/tor Steel Bar Bars Fe 500 grade as per IS 1786-2008 complete in all respect as desired by engineer in charge. |
| 563 | Supply, Installation & Testing of Chemical Earthing (Maintenance Free EarthingSystem with UL Approved Copper Bonded Rod and exothermically welded Cu Busbar both tested by CPRI at 50kA Fault Current. A Copper bonded steel rod shal have 3000 mm length and 17.2 mm dia. with copper bonding thickness of minimum 250 microns. Along with Earth enhancement compound tested by ROHS complying IEC 62561-7 in a sealed bag of minimum 50 kg (25 kg Bag x 2). A Copper clad stee solid ground wire of 8 mm dia. For interconnecting earth pits including earth pi covers is required.Each earth pit shall be covered with heavy duty weather proo environment friendly polyplastic earth pit chamber.The grounding minerals should not be pollute the ground water.The grounding minerals shall be tested & certified fo the resistivity of less than 0.12ohm mtr complete in all respect as desired by engineer in charge of the work. |
| 564 | Supply, Erection, Testing & commissioning of Inverter sine wave 2300VA with 2no's 160AH Tubular battery & rack in all respect upto the entire satisfaction of the Engineer-in-charge of work. |
| 565 | Cost of Fire Alarm Detection System |
| 566 | PVC INSULATED FR COPPER CONDUCTOR CABLES: |
| 567 | Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wirewith copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe o on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 568 | Overall size 1.5sq.mm (48/0.20mm), 2Core |
| 569 | Supply, fixing, testing and commissioning of Microprocessor based intelligent panewith 4X16 character LCD display built in real time clock with 100 event data logge having date and time stamp with Auto dialer system (4Lines) connection to indicate fire and fault LED lamps for visual indication audio alarm units, push buttons fo acknowledge, test, reset complete with power supply unit for 24volt DC from 230volts AC and 8 Hours back up given by the bakery with battery charger. PA system of complete with microphone selector all on plug in type modular design integrated, solid state silver/ gray textured powder coating should have door with Acrylic window finger corrosion proof painted body having 6 working Zone sleek and compact, suitable sizes made from 16 SWG sheet and of ERTL. The panel should be wall Mounted suitable locking arrangement. The panel should be as per is 2189- 1989 amended up to date and must confirm to various technical parameters. the battery provision bank of 2x12 V (42ah) Battery Exide Make mtc.free. Panal have to be attached with the amplifier for public address system on all floors and having audio system complete in all respects as approved and desired by the Engineer incharge at site. |
| 570 | Supply and erection of Public Address System 30watt connection complete in alrespects as approved and desired by the Engineer in-charge at site. |
| 571 | Supply and erection of glass break manual call point as per IS-2189 with blinkingFacility(With chain hammer) M.S.-II of 85mmx85mmx50mm size in MS sheet of 16 SWG with push button voltage of 24 VDC current 500mA max. with red colo complete in all respects as approved and desired by the Engineer in-charge at site. |
| 572 | Supply and erection of Electrical Hooter with wailing tone tested by ERTL as per IS2189 hi-intensive sound (80 to 100 db) in MS-III sheet box of 130mm x 180mm x80mm in red color with speaker DC voltage 24 vdc/ 100V with 300mA current sound o/p 100 db range 50metre with Line matching transformer for annunciations complete in all respects as approved and desired by the Engineer in-charge at site. |
| 573 | Supply and erection of Heat/Rate of Rise type detector ULC/FM approved withsensing temperature of 58 Degree Cent. With PVC acrylic base sheet i.e connection testing commissioning complete in all respects as approved and desired by the Engineer in-charge at site. |
| 574 | Supply and erection of Multi Criteria Detector Smoke detector VL/ULC/FMApproved (interchangeable) built in LED with flashing/Blinking facility to Indicate healthy condition of detector i.e. connection testing commissioningcomplete in al respects as approved and desired by the Engineer in-charge at site. |
| 575 | Supply and erection of Response indicator of 60x95x30mm size enclosed in a boxmade of polymer (P.S. MINI R) sheet duly painted having two LED to glow with white/red color paint and voltage Current of 24vdc / 5 MA. The indicator box should have provision for conduit entry and should be as per ISI specification. complete in all respects as approved and desired by the Engineer in-charge at site. |
| 576 | Supply and erection of Repeater/Slave Microprocessor based intelligent panel with4X20 character LCD to indicate fire and fault LED lamps for visual indication audio alarm units, push buttons for acknowledge, test, reset complete. Selector all on plug in type modular design integrated, solid state silver/ gray textured powder coating should have door with Acrylic window finger corrosion proof painted body 6 Zone sleek and compact, suitable sizes made from 16 SWG sheet and of ERTL Approved. The panel should be wall Mounted suitable locking arrangement. The panel should be as per is 2189-1989 amended up to date and must confirm to various technical parameters. complete in all respects as approved and desired by the Engineer in-charge at site. |
| 577 | Supply and erection of Detector Base VL/ULC/FM Approved Base complete in alrespects as approved and desired by the Engineer in-charge at site. |
| 578 | Cost of CCTV Surveillance System |
| 579 | Supply & erection of Bullel FIX Focal CAMERA SMP IP Camera STQC Approved wilh Audio InpuSupport and following fealures Resolution - 5 MP (2592 x 1944), Sensor Type and Size-1/2.8\\" SONY CMOS SMP Aclive Pixel Progressive Scan, Back Illuminaled Image sensor, Minimum Illumination Color0.01 Lux @F1.2 (AGC ON), Monochrome - 0 Lux Focal Length-3.6/2.8/4mm, Focus Range - 0.3m to infinity, Field of View (FOV)Minimum-HFOV — 87.6° VFOV — 46.4° DFOV — 104.5° Focus-Fixed focus Aperture (F#) F 1.6 / F 2.0,Iris Type Fixed, IR Range Up to 50m, IR Led Wavelength 850nm, IR Swilching Aulo/ Manual , Audio IN 1,Audio OUT 1,Two-way Audio Supported, Audio Compression G.726 and G.711p Alarm In Yes, Alarm Out Yes,SD Card Up to 512GB, Camera Adjustment Angle Pan: 0° lo 360 Tilt: 0° to 90° Rotale: 0° to 360°,No of Stream Profiles 4, Slream Profiles- Profile 1: Mainstream 2592”1944@ 30fps (H.265/H.264), Profile 2: Sub stream - D1@30fps (H.265/ H.264), Profile 3: MJPEG 2048*1536@8fps (MJPEG) or D1/VGA@15fps(H.264/H.265) Profile 4:1920*1080@30fps (H.265/H.264/MJPEG) Available Resolulions 2592 x 1944, 2592 x 1520, 2048 x 1536, 1920 x 1080 720p, DI, VGA, 2CIF, CIF, Max Resolulion 2592 x 1944, Bilrate 128 kbps-16Mbps, Bitrate Type CBR VBR, Video Compression H.265, H.264, MJPEG, Frame Rale 1-30fps, Shutter Speed 1/15s 1/100000s,Adaptive Streaming Yes, ONVIF Profiles S, G, and T, Edge Recording Yes, Alarm Recording Pre and Post, Motion Recording Yes, Time Triggered Yes, Video Parameters Snapshot, Region a Interest (ROI), BLC, PLC, Day/Night Settings, Privacy Masks 8, WDR True WDR (120dB), SNR >70dB Image Enhancemenl Saluralion/ Contrast/ hardness/Brightness/Auto Exposure/HVS- Forensics/ Smar1 IR DNR 2D &3D Video Analytics, Motion/No Molion Defection, Tamper Detection, Trip/No Trip Defection Objecl Intrusion/Zone Intrusion, Audio Exception, IP Conflict Yes, Network Disconnect Yes, Storage Fu Yes, Upload Image SD, NAS, SFTP, Upload Clip SD, NAS, SFTP Notifications E-mail, SMS, TCP Supported protocols, TCP/IP, UDP, HTTP, HTTPS, DHCP, DNS, Dyn DNS, DDNS, RTP, RTCP, RTSP PPPOE, SMTP, NTP, SNMP, FTP, TLS/SSL, SFTP, ICMP, IGMPv2 & v3, ARP, 802.1x, IPv4, IPv6, QoSLayer 3, DSCP, CIFS, SSH, UPnP, Bonjour, Web Viewer Supported in IE 8.0-11.0, Firefox 15.0-4 .0Chrome 20.0-54.0, Browser IE, Chrome, Mozilla, CYBER SECURITY as per ISO/IEC 27402-Secure boo Yes, Signed firmware Yes, Dala Encryption All data, including sensitive data, is encrypled with AES 256 and RSA 2048, IP Address Filtering Yes, HTTPs Streaming Yes, using TLS 1.2, Edge Data Encryption Yes, Network Authenlic tion Yes,802.1x Network authen licalion, Secure Firmware Upgrade Yes, Anti-ro back firmware Yes, Web login Password protection Yes, Unused debug inlerface protection Yes, Powe Supply 12V (DC); 802.3af (PoE), Power Consumption Approximately 7W, Operating Humidity Less lhan 95% RH (noncondensing), Operating Temperature -30°C to 60°C,Storage NAS, SD Card, BIS, CE, IP67 FCC Part-15 Subpart — B, ONVIF S, G & T, IK10, UL, NEMA 4X*”,- complele in all respect as desired by the engineer in charge at site. |
| 580 | Supply & ereclion of Dome FIX Focal CAMERA SMP IP Camera STQC Approved wilh Audio InpuSupport and following fealures Resolution - 5 MP (2592 x 1944), Sensor Type and Size-1/2.8\\" SONY CMOS SMP Aclive Pixel Progressive Scan, Back Illuminaled Image sensor, Minimum Illumination Color0.01 Lux @F1.2 (AGC ON), Monochrome - 0 Lux Focal Lenglh-3.6/2.8/4mm, Focus Range - 0.3m to infinity, Field of View (FOV)Minimum-HFOV — 87.6° VFOV — 46.4° DFOV — 104.5° Focus-Fixed focus Aperture (F#) F 1.6 / F 2.0,Iris Type Fixed, IR Range Up to 50m, IR Led Wavelength 850nm, IR Swilching Aulo/ Manual , Audio IN 1,Audio OUT 1,Two-way Audio Supported, Audio Compression G.726 and G.711p Alarm In Yes, Alarm Out Yes,SD Card Up to 512GB, Camera Adjustmenl Angle Pan: 0° lo 360 Tilt: 0° to 90° Rotale: 0° to 360°,No of Stream Profiles 4, Stream Profiles- Profile 1: Mainstream 2592*1944@ 30fps (H.265/H.264), Profile 2: Sub stream - D1@30fps (H.265/ H.264), Profile 3: MJPEG 2048”1536@8fps (MJPEG) or DI/VGA@15fps(H.264/H.265) Profile 4:1920”1080@30fps (H.265/H.264/MJPEG) Available Resolulions 2592 x 1944, 2592 x 1520, 2048 x 1536, 1920 x 1080 720p, DI, VGA, 2CIF, CIF, Max Resolution 2592 x 1944, Bilrate 128 kbps-16Mbps, Bitrate Type CBR VBR, Video Compression H.265, H.264, MJPEG, Frame Rale 1-30fps, Shutter Speed 1/15s 1/100000s,Adaptive Streaming Yes, ONVIF Profiles S, G, and T, Edge Recording Yes, Alarm Recording Pre and Post, Motion Recording Yes, Time Triggered Yes, Video Parameters Snapshot, Region a Interest (ROI), BLC, NLC, Day/Night Sellings, Privacy Masks 8, WDR True WDR (120dB), SNR >70dB Image Enhancemenl Saluralion/ Contrast/ hardness/Brightness/Auto Exposure/HVS- Forensics/ Smar1 IR DNR 2D &3D Video Analytics, Motion/No Molion Defection, Tamper Defection, Trip/No Trip Defection Objecl Intrusion/Zone Intrusion, Audio Exceplion, IP Conflict Yes, Network Disconnect Yes, Storage Fu Yes, Upload Image SD, NAS, SFTP, Upload Clip SD, NAS, SFTP Notifications E-mail, SMS, TCP Supported protocols, TCP/IP, UDP, HTTP, HTTPS, DHCP, DNS, Dyn DNS, DDNS, RTP, RTCP, RTSP PPPOE, SMTP, NTP, SNMP, FTP, TLS/SSL, SFTP, ICMP, IGMPv2 & v3, ARP, 802.1x, IPv4, IPv6, QoSLayer 3, DSCP, CIFS, SSH, UPnP, Bonjour, Web Viewer Supported in IE 8.0-11.0, Firefox 15.0-4 .0Chrome 20.0-54.0, Browser IE, Chrome, Mozilla, CYBER SECURITY as per ISO/IEC 27402-Secure boo Yes, Signed firmware Yes, Dala Encryption All data, including sensitive data, is encrypled with AES 256 and RSA 2048, IP Address Filtering Yes, HTTPs Streaming Yes, using TLS 1.2, Edge Data Encryption Yes, Network Authenlic tion Yes,802.1x Network authenticalion, Secure Firmware Upgrade Yes, Anti-ro back firmware Yes, Web login Password protection Yes, Unused debug inlerface protection Yes, Powe Supply 12V (DC); 802.3af (PoE), Power Consumption Approximately 7W, Operating Humidity Less lhan 95% RH (noncondensing), Operating Temperature -30°C to 60°C,Storage NAS, SD Card, BIS, CE, IP67 FCC Part-15 Subpart — B, ONVIF S, G & T, IK10, UL, NEMA 4X*”,- complele in all respect as desired by the engineer in charge at site. |
| 581 | Supply & Erection of 32 Channel IP INPUT 12MP NVR 4K with 4 SATA havingfollowing features:- Up to 16 Channel Input, 4 Sata Interfaces, Up To 12TB each H.265+/H.265/H.264 Video Formats, 2 HDMI Port,1 VGA, USB3.0*1, USB2.0”2Support,2• RJ45 Self-adaptive 10/100/1000 Mbps Network Interfaces, Supports live view, storage and playback of the connected camera at up to 12MP resolution Connectable to the Third Party Network Cameras, Incoming Bandwidth -320M Outgoing Bandwidth-320M, Recording Resolution-12 MP/8 MP/5 MP/4 MP/3 MP/1080p/720p, Recording Compression, Audio: G.711a,G.711u, Video H.264/H.265, H.264+/H.265+, Speed -12MP:30fps 8MP:120fps 4MP:240fps2MP:480fps, Playback- 1080P:480fps Max 16CH, WEB -IE10/11, Safari V12.1 above, Firefox V.52 above, Google chrome V.57 above, Edge V.79 above, Protocols TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, UPnP HTTP, HTTPS, API -Onvif (profile S/G/T), VGA- 1(1024”768, 1280”720, 1280”1024 1440”900, 1920”1080 ), HDMI -1(1024*768, 1280”720, 1280”1024, 1440*9001920”1080, 2560”1440(2K), 3840*2160(4K)) 1(1024*768, 1280”720, 1280*10241440”900, 1920”1080 /EDID) Async out, Ethernet-2 RJ45 100/1000 Base-T USB USB2.0*1(front), USB3.0”1 USB 2.0 ”1 (rear), Audio-1 in / 1 out, E-sata-1,HDD 4, each up to 12TB, RS 485-1, Alarm Input/out -16 in /1 out, OSD LanguageEnglish, Input Voltage/ Current 12V/5A, Power consumption (excluding hard disk) -8W Operating Temperature/Humidity-Temperature :-10°C-+50°C (14°F- 122°F) Humidity : Less than 90%RH complete in all respect as desired by the engineer in charge at site.complete in all respect as desired by the engineer in charge at site.Complete in all respect to the entire satisfaction of the engineer-in charge. |
| 582 | SUPPLY & ERECTION of 8000GB Audio Video HDD 3.5 Inches Connector SATAInterface SATA, Operating Temperature 0°C to 65°C, Transfer Rate minimum 160MB/s, Recording Technology — CMR, Certifications BSMI, ICES-003/NMB-003 CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL for NVRrecording and playback complete in all respect as desired by the engineer in charge at site. Complete in all respect to the entire satisfaction of the engineer-in-charge. |
| 583 | Supply & erection of Smart 43\\" LED Commercial Panel /ReguIar with 2 HDMI PortTV Input, 3 Years Warranty, 2 HDMI Port, TV Input, 3 Years Warranty, Resolution 4K, Brightness 300 cd/m2 Support 4K Ultra HD 20 Watt 2.0 Audio Output Web Browser Soft AP, WiFi (bandwidth) Screen Share (Miracast) Samsung TV Plus App USB Cloning, 2 No. Of HDMI Port 2 no USB Port complete in all respect as desired by the engineer in charge at site. |
| 584 | SITC of 24 Port POE 360+ Watts L2 managed 10/100/1000 Mbps Data switch withwith 4 No Uplinks RJ45 and SFP Combo 1G Ports • IEEE 802.3u 100BASE-TX Fast Ethernet• IEEE 802.3ab 1000BASE-T Gigabit Ethernet• IEEE 802.3az Energy Efficient Ethernet (EEE)• ANSI/IEEE 802.3 NWay auto-negotiation• IEEE 802.3x Flow Control, Standards • IEEE 802.3 10BASE-T Ethernet Switching Fabric • 50 Gbps Data Transfer Rates • Gigabit Ethernet • 2000 Mbps (full-duplex) • Fas Ethernet • 100 Mbps (half-duplex) • 200 Mbps (full-dupIex)• Ethernet • 10 Mbps (half dupIex)• 20 Mbps (full-duplex), PoE Standards • IEEE 802.3af • IEEE 802.3at PoE capable Ports • Ports 1 to 8 Power 60W • 360 W (30 W max. per PoE port). CPU RAM 256MB or above, Certification - FCC class A, CE class A, VCCI, BSMI, CCC CE, LVD, UL, CB Oper Temp- -5 to 50 °C (23 to 122 °F) complete in all respect as desired by the engineer in charge at site. |
| 585 | Supply, installation, testing and commissioning of CAT 6 24 Port Fully loaded PatchPanel, Rack Mountable for cable termination, ID Plate PC transparent color with paper, Panel: SPCC,1.5mm thickness with black color painted, RJ45 Jack- Housing P B T + g la ss fiber, UL-94V-0 Contact Brackets: PBT + glass fiber, UL-94V-0 RJ45 Jack Contact- Material: Phosphor bronze with nickel plated Finish: 50 micro inches Gold plated on plug contact area, IDC Housing: PC, UL 94V-0 Terminal phosphor bronze with tin plated, e ANSI/TIA/EIA 568C.2 & ISO/IEC 11801 standard..Complete in all respect to the entire satisfaction of the engineer-in-charge |
| 586 | Supply, installation, testing & Commissioning of CAT 6 ONE Meter Iong Patch CordHaving RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps Conductor: 24 AWG, Multi-strands Conductor Metal: Bare Copper Insulation Material: HD-PE Material: FR-PVC s TIA/EIA 568C.2 standard ISO/IEC 11801 Class EA. Gold Plated: COU° Contact Blade: Copper Alloy Dielectric withstanding voltage 1000V DC/min, SOOM Ù, 1000V DC/min UL Applications: PC UL94-V-0 complete in all respect as desired by the engineer in charge at site |
| 587 | Supply & erection of 10 meter long superior quality 4K HDMI Cable having speedupto 10gbps support all types of HDMI Devices complete in all respect as desired by the engineer in charge at site. |
| 588 | COPPER CONDUCTOR CABLES FOR SPECIAL ELECTRICAL SERVICES: |
| 589 | Supply and erection of CAT 6 with 23AWG solid bare copper conductor, specia grade PE insulation with star separator, 4pair Unshielded Twisted Pair (UTP industrial cable, FR PVC sheathed, Class-E, 250 MHz of bandwidth, supporting data transfer speeds of up to 10 Gbps (1OGBASE-T) for distances up to approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 590 | CAT 6 LAN cable |
| 591 | Supply & erection of 1KVA/800Watt 36VDC Online UPS with In- Built 3 NoBakeries Pure Sine wave with following features OVCD Wide input range Programmable output range 208V/220V/230V/240V 12V x 7Ah x 3 No. SMF batteries in-built Output Power Factor 0.9 Oms Transfer time from Inverter Mode to Bakery Mode Charger Current 1.5 Amp Cooling Fan True Online Double Conversion Inbuilt Over-voltage Cut-off Device Inbuilt Over Temperature Protection Surge Protection Beker Overload Protection upto 105% Constant Higher Efficiency up-to 92% in ECO Mode 2 year onsite warranty on UPS 30+ minutes Back up time on switches Ioad.complète in all respects as approved and desired by the Engineer-in-charge at site. |
| 592 | Supply & erection of 12U Wall mount 19\\" Rack with glass door,Iock & key facilité400/450/500mm depth AC Fan having 10 no. mounting hardware, Cable entry/exi provision at top and bokom panels, Ventilation slots on top, bottom and side panels Fixed side panels, Comply IS Standard of Racks. complete in all respect as desired by the engineer in charge at site. |
| 593 | Cost of Security Lighting |
| 594 | PVC INSULATED FR COPPER CONDUCTOR CABLES: |
| 595 | Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copperconductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 596 | Overall size 1.5sq.mm (48/0.20mm), 3Core |
| 597 | XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): |
| 598 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- |
| 599 | Overall size 10sq.mm (3Core) Un-armoured (On-Surface) |
| 600 | AUTOMATIC VOLTAGE STABLIZER, TIMER: |
| 601 | TIMER: |
| 602 | S/E of Microprocessor Based Street Light Controller with digital time switch daily programmedwith stand by lithium battery with back up of 6 years with min. time beMeen 2 switching operations is 1 minute, three pole power contactors 40A. with coil voltage 220-230V AC with 1 no. aux. contact NO, MCB 2 pole 40amp. (C-Curve, 10kA) & power wiring with single core PVC insulated FR cable 10 sq. mm and control wiring with PVC insulated FR cable 1 sq. mm, 1 no two position selector switch to bypass timer and other accessories & petty material (din rail, 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) should be fixed on bakelite sheet 6mm thick to be mounted in a IP54 surface/ flush mounting powder coated sheet meta (1.60mm thick) cabinet having size 450mm x 600mm x 150mm to switch ‘ON' all the 3 phases & switch ‘OFF' 3 phases pre-fixed timings complete in all respect as per satisfaction of Engineer- in-charge:- |
| 603 | Street Light Controller (For Single Phase Circuit) with 1 No. Three Pole Power Contactor 40A, 1No. MCB 2 Pole 40amp. (C-Curve,10kA) & petty material (Din rail, 1 No. 4 pole bakelite termina strip 63A/ 440V AC, required nut bolts) |
| 604 | LAYING OF UNDER GROUND CABLES, DISMANTALLING & ERECTION OF POLES ANDCEMENT CONCRETE MUFFS: |
| 605 | Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet mouldingcompound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with + 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:- |
| 606 | SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm toIS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement |
| 607 | Supply and erection of heavy duty aluminium thimbles/lugs for cable endtermination duly crimped including making necessary connections completely:- |
| 608 | Aluminium thimble cable Core size 10 - 16sq.mm |
| 609 | Supply and erection of LED Flood Light 120watt, Supply Voltage 140-270VoIts AC supply, 50Hz+ 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection) THD<10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 610 | Cost of On Grid Solar Power Generating System |
| 611 | Supply, Installation, testing & Commissioing of Grid interactive PV SystemSolar Power Plant (i.e connected to utility grid) of Minimum 5KWp including required quantities of SPV modules (High power density Monocrystalline based single module iof capacity+550W) formed into arrays, their mounting arrangement, Power conditioning units (i.e String Solar Inverter), required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board through Cable tray, Bi Directional Energy Meter Chemical copper bonded rods (i.e. 1 Nos. GI Structure, 2Nos. for String Inverter, AC & DC Distribution System)Provsion of Lighting arrester and 2 Nos. G.I. chemical earthing with copper bonded rods. Hot Dip Galvanized MS Mounting Structure be Designed to with stand the Speed for the Wind Zone o the Location(Rated Wind Speed 150-170Kph) Complete with transportaion fabrication, labour & Civil Work.Features:- |
| 612 | 1. Solar PV Module Warranty 25 Years & Certified Under IS/IEC 61730 1&2IS/ IEC 61701 & IS/IEC 14286 & IEC 61215, BIS Certificates & MNRE, GOlatest specifications / Standards.2. Power Conditioning Unit (String Solar Inverter) & Certified under IEC/EN 62109-1,IEC / EN 62102-2 , EN 61000-6-2, EN61000-6-3, IEC61683, EN50530 , IEC 60068-2-1,2,14,30,EN 60529, IES 60947 Part 1,2,3 IS 60947Part 1&2 , IES 60227/IS 694,IES 60502/IS 1554 BIS Certificates & MNRE GOI latest specifications / Standards.3. Structure : 25 Years Service Life with AMC & Certified under IS 2062:20114. Complete Plant Insurance for the period of 5 Years (Excluding Theft of the material)5. Annual Maintenance Contarct for the period of 10 YearsConditions:- 1. The Plant will be installed as per MNRE and GOI guidelines specifications.(Detail of Material as per Annxeure -1 Attached)2. The Work will got done from approved MNRE (Ministry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency Contractors.PWD enlisted contractor subject to condition that PWD Enlisted contractor will get work done from MNRE (Ministry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency) approved Conractors. The Rates are inclusive of Bi-directional meter testing charges, PSPCL Connection Charges, Unidirectional meter cost and all type of taxes including GST Total in Figures 27998925.61 27964826.85 INR Two Crore Seventy Nine Lakh Sixty Four Thousand Eight Hundred & Twenty Six and Paise Eighty Five Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender