Tender For Comprehensive & Welcome Maintenance To Govt Md Accn Of Rak Marg, Dilkusha Officer Enclave, Kb Road & Adjoining Areas In The Area Of Age B/R-I Under Ge (West) Lucknow
Tender Value
1.03 Crore
Estimated cost
Bid Submission
06 Oct 2026
2 days left
EMD
2.06 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive & Welcome Maintenance To Govt Md Accn Of Rak Marg, Dilkusha Officer Enclave, Kb Road & Adjoining Areas In The Area Of Age B/R-I Under Ge (West) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (WEST ) Lucknow Name of Work : COMPREHENSIVE & WELCOME MAINT TO GOVT MD ACCN OF RAK MARG, DILKUSHA OFFICER ENCLAVE, KB ROAD & ADJOINING AREAS IN THE AREA OF AGE B/R-I UNDER GE (WEST) LUCKNOW Contract No: GE/W/LKO/T-100 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words 8.0 |
| 2 | M & L brickwork with fly ash bricks,Modular bricks straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed. |
| 3 | Taking down cement plaster and clean the floor or wall surface for treatment by removing dust, dirt and loose particles over the surface etc by mechanical means with following specifications :-(a) Providing and applying the water based silicon water repellent. It shall be mixed with water in brick work or concrete surfaces in 1:10 ratio or as per manufacturer's instruction.(b) Providing and applying one coat of modified cementitious bonding agent / water proofing coating treatment over the treated area of water repellent mixed with 1 part of cement and 1 part of Latex SBR/Bond SBR.(c) Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick on brick walls, finished even & smooth without using extra cement complete as per manufacturer's instructions. |
| 4 | Taking down cement plaster and clean the ceiling surface for treatment by removing dust, dirt and loose particles over the surface etc by mechanical means with following specifications :-(a) Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 5mm thick on ceiling surfaces, finished even & smooth without using extra cement complete as per manufacturer's instructions. |
| 5 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper (OBD) of approved shade/tint over a coat of priming complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 6 | M & L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed. |
| 7 | M & L preparation of new surfaces of of ceiling and applying two coats of white wash on ceiling complete all as specified and directed. |
| 8 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc by skilled labour complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 9 | M & L for 1 mm thick wall care putty on wall in two coats and smooth finished by sanding with mechanical sander complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 10 | Material & Labour and preparation of old surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 11 | M & L for prepration of old treated surface of walls, boundary/compound wall etc and applying two coat of white wash complete all as specified and directed. |
| 12 | M&L for complete removal of the existing old surface on walls and applying two coats of cement based paint over a coat of cement based primer including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 13 | M & L for preparation of old treated surface of ceiling and applying one coat of oil bound distemper complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 14 | M & L for preparation of old treated surface of wall and applying one coat of oil bound distemper complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 15 | M & L for preparation of old treated surface of wall and applying two coats of oil bound distemper complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 16 | M & L for complete removal of existing treatment of old surface of wall and applying two coats of oil bound distemper complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 17 | M & L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed. |
| 18 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 19 | M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 20 | M & L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 21 | M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified.and directed. NOTE : The work for exterior/interior painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to exterior/interior painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 22 | M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151 acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight complete all as specified and directed. |
| 23 | M & L for preparation of old surfaces of wall and applying two coats of plastic emulsion paint complete all as specified and directed. NOTES : Item No 04, 07 to 09, 12 to 15, 17 to 20 & 22:(a) The work pertaining to painting work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like acrylic emulsion paint, plastic emulsion paint, OBD, synthetic enamel paint, putty etc (as applicable) after approval by the GE.(b) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected.(c) Use of scaffolding, trestles, ladders,cradles etc necessary for execution of work and protective measures.(d) Removing of Nails, making good holes, cracks etc.(e) Work in patches and in narrow/widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.(f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass, joinery electric fittings, wiring etc, Drop and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge.(h) Sample patch of 10 Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. |
| 24 | M & L for double charged virified ceramic tiles 8-10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) & including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 25 | M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM (1:6) & including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 26 | M & L for glazed ceramic tiles (coloured) 350x250x7mm/450 x 350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement mortar 1:4 & including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 27 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.& including screed bed or bedding layer 15mm thick in cement mortar 1:4 and including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed. |
| 28 | M & L for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregae) as in floors, finished even and smooth using extra cement and including demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level all as specified & directed. |
| 29 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each complete all as specified & directed. |
| 30 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm and not exc 4.00 Sqm each complete all as specified and directed. |
| 31 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed. |
| 32 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and and removal from site complete all as specified and directed. |
| 33 | S & F IInd class hard wood Plain, solid, straight chowkhats & frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 34 | M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of holdfasts etc complete all as specified and directed. |
| 35 | M & L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 36 | S & F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat complete all as specified & directed. |
| 37 | S & F PVC solid door frame of size 50x47mm made out of 5m plain coloured sheet reinforced with MS square tube & with wood grain printed complete all as specified and directed. |
| 38 | S & F 30mm thick PVC factory made panelled door shutter with wood grain printed & decorative beading with 10mmx10mm as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat maulded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawings complete all as specified and directed. |
| 39 | S & F 250 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sectionS & Fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 40 | S & F mild steel helical door spring 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 41 | S & F of aluminium butt hinges medium weight 100mm type C-21 complete all as specified and directed. |
| 42 | S & F butt hinges of size 100 mm medium weight, cold rolled mild steel complete all as specified and directed. |
| 43 | S & F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed. |
| 44 | S & F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed. |
| 45 | S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed. |
| 46 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed. |
| 47 | S& F in repair 18/19mm block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed. |
| 48 | S & F 0.9 mm thick sunmica/laminator with decorative lamination fixed with synthetic Glue / Adhesive to timber frame/wood work, edge chamfered as directed complete all as specified and directed. |
| 49 | M & L for mild steel work as in bands, straps, clamps , hold fasts, wall tiles, plain angle cleats for securing purlins to wood trusses or rafters, and similar samll articles confirming to Fe-290 Gde -E-165 complete all as specified and directed. |
| 50 | S & F in repair two (double) legged floor door stopper of aluminum body & toungues anodess with hard drawer steel spring fixed in floor of over all length of cover plate 140mm complete all as specified and directed.. |
| 51 | S & F in repair 450mm long Stainless steel six peg hanger chromium plated complete all as specified and directed. |
| 52 | S & F in repair heavy duty CP mild steel hanging rod 20mm dia with end bracketS & Fixed with screw complete all as specified and as directed |
| 53 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips complete all as specified.and directed. |
| 54 | S & F Sheet glass 4mm thick ordinary quality and glazing with rubber beeding etc in suqares n exc 0.5 Sqm in each pane complete all as specified.and directed. |
| 55 | S & F 4 mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pan complete all as specified and directed. |
| 56 | S & F 2nd class hard wood Plain fillets.square,rectangular or triangular in section, clean sawn, secured with nails or brads in area not exc 3 Sqm CM complete all as specified and directed. |
| 57 | S & F continuous (Piano)) hinges mild steel bright finished or electo galvanised, with width of flap 30 mm when open and fixed with screws complete all as specified and directed. |
| 58 | S & F 100 mm long aluminium anodiesed, haps and staple, safety type with steel hinges pin including bolts to hinge plate and fixed with srews complete all as specified and directed. |
| 59 | S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 60 | S & F in repair sliding chanel of drawer 450 to 600 mm long,mild steel, chromium plated, heavy duty, suririor quality and fixed complete all as specified and directed |
| 61 | S & F in repair medium grade stainless steel 25mm dia curtain rods including brackets & fancy type end knobs complete all as specified and directed. |
| 62 | S & F in repair fancy type PVC coated decorative curtain rod of 25mm dia of approved shade including MS bracket including latto on each end complete all as specified and directed. |
| 63 | S & F in repair framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 64 | M & L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings & fixed to walls and ceilings or laid in floors and including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed. |
| 65 | M & L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings & fixed to walls and ceilings or laid in floors and including taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed. |
| 66 | M & L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. |
| 67 | S & F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed. |
| 68 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe complete all as specified and directed. |
| 69 | S & F in repairs PVC valveless syphonic action type low level flushing cistern of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed. |
| 70 | S & F in repair Flush syphon Kit for any respective pattern for low level flushing cistern any description complete all as specified and directed. |
| 71 | S & F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shankS & Fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug) complete all as specified and directed. |
| 72 | S & F in repairs long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule including CP flange complete all as specified & directed. |
| 73 | S & F in repairs CP angle valve long body for 15 mm bore pipe with capstan head long screwed shank including CP flange fancy type complete all as specified and directed. |
| 74 | S & F in repair 15mm bore concealed type, stop valve, cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 75 | S & F in repair fancy type pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks & flynuts, screwed for iron pipeS & fixed for 15mm dia complete all as specified and directed. |
| 76 | S & F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed. |
| 77 | S & F in repair central hole wash hand basin mixer, fancy type, brass chromium plated with round spout with poup waste system , including plugging and fixed, suitable of 15 mm bore pipe complete all as specified and directed. |
| 78 | S & F in repair wall mixer L-bend type with connecting legs and wall flanges, fancy type brass chromium plated, with closted swinging spout including plugging and securing to walls suitable for 15 mm bore pipe complete all as specified and directed. |
| 79 | S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 80 | S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed. |
| 81 | S & F in repairs brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed. |
| 82 | S & F in repairs Brass spindle for Concealed stop cock any type or pattern complete all as specified and directed. |
| 83 | S & F in repairs Brass spindle for bib tap/stop cock/angle valve etc any type or pattern complete all as specified and directed. |
| 84 | S & F 500 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top), hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc complete all as specified and directed. |
| 85 | S & F 1000 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc complete all as specified and directed. |
| 86 | S & F 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 87 | S & F in repair 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 88 | S & F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 89 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps complete all as specified and directed. |
| 90 | S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps complete all as specified and directed. |
| 91 | S & F in repair 600x450x5mm thick bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood or PVC sheet and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 92 | S & F in repair of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed. |
| 93 | S & F in repair toilet paper holder, CP box type complete all as specified and directed. |
| 94 | S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall as directed. |
| 95 | S & F in repairs PVC connections 450mm long, 15mm size with brass chromium plated nuts at ends complete all as specified and directed. |
| 96 | S & F in repairs PVC connections 600mm long, 15 mm size with brass chromium plated nuts at ends complete all as specified and directed. |
| 97 | S & F in repair PVC flexible waste Pipe, 32 mm bore for WHB /Sink complete all as specified and directed. |
| 98 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections & fixed in position complete all as specified and directed. |
| 99 | S & F in repair double bowl sink of 1145x510 mm, size of bowl 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipes & couplings etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and directed. |
| 100 | S & F in repair sink with drainage board size 1145x510 mm, bowl size 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and directed. |
| 101 | S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600 mm including screws and weight not less than 5.00 Kg complete all as specified and directed. |
| 102 | Cleaning and removing all scale and dirt, etc, from tanks & from mouths of circulating pipes, etc exc 250 and n exc 500 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed. |
| 103 | Cleaning and removing all scale and dirt, etc, from tanks & from mouths of circulating pipes, etc exc 500 and n exc 1000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed. |
| 104 | S & F in repair 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) corrugated sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners complete all as specified and directed. |
| 105 | S & F in repair for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe -410-W (Gde- E 250 quality B) complete all as specified and directed. |
| 106 | S & F magnet catcher heavy duty for cupboard shutter complete all as specified and directed. |
| 107 | (a) Providing and applying the water based silicon water repellent. It shall be mixed with water in brick work or concrete surfaces in 1:10 ratio or as per manufacturer's instruction.(b) Providing and applying one coat of modified cementitious bonding agent / water proofing coating treatment over the treated area of water repellent mixed with 1 part of cement and 1 part of Latex SBR/Bond SBR.(c) Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CM (1:4) on brick walls, finished even & smooth without using extra cement complete as per manufacturer's instructions. |
| 108 | S&F in repairs cover (lid) of Rotational moulded PVC water storage tank of 250 to 2000 ltrs capacity fixed in position all as spd and directed. |
| 109 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length incl M.S. hold fast/ lugs or SS dash fasteners complete all as specified and directed. Note for WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 110 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length incl M.S. hold fast/ lugs or SS dash fasteners complete all as specified and directed. Note for WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 111 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed (Butt hinges shall be paid separately). |
| 112 | S&F 30 mm thick Factory made solid WPC (Wood polymer Composit)both side pre-laminated moulded gauged door shutter min density 650kg/Cum with wire mesh in any number of division with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm and XPM aluminium mesh for additional strength and safety shall be fixed with 15 x 15 square tube in side rails with screwing 8 x 28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws. The density shall be as per manufacture instruction complete all as specified and directed. |
| 113 | S & F in repair 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured and ISO 9001/2015 certified company complete all as specified and directed. |
| 114 | S & F in repair aluminium Door seal for all type of doors complete all as specified and directed. |
| 115 | Taking down carefully existing aluminium or copper point wiring (light, fan, socket, bell or power) including all associated fixtures and fittings such as switches, ceiling roses, regulators, sockets, lamp/angle holder etc and making good the disturbed surfaces to an even and smooth finish using cement mortar 1:3 and applying white/colour wash to match the existing surface complete all as specified and directed. |
| 116 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 1.5 sqmm including PVC insulated FRLS copper earth continuity conductor 1.5 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour of size not less than 25 mm dia with all necessary conduit fittings and accessories such as bends, tees, couplers, junction boxes etc including concealed sunken modular GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular switches, sockets, regulators etc complete with following:– (a) One light or one fan point controlled by one switch. |
| 117 | All as per item No 115 above but one bell/ buzzer point controlled by one bell push complete all as specified and directed. |
| 118 | All as per item No 115 above but one socket outlet 6 Amp controlled by one switch on the same board with other switches complete all as specified and directed. |
| 119 | All as per item No 115 above but one socket outlet 6 Amp controlled by one switch on indepdendent board complete all as specified and directed. |
| 120 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 2.5 sqmm, including PVC insulated FRLS copper earth continuity conductor 2.5 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour, of size not less than 25 mm dia, with all necessary conduit fittings and fixing accessories, including sunken GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular accessories, complete for one 6A or 16 A socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 121 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 1.5 sqmm including PVC insulated FRLS copper earth continuity conductor 1.5 sqmm, colour-coded as per IS, drawn through existing rigid non-metallic PVC conduit/casing caping , medium grade, ISI marked, ivory colour of size not less than 25 mm dia with all necessary conduit fittings and accessories such as bends, tees, couplers, junction boxes etc including concealed sunken modular GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular switches, sockets, regulators etc complete with following:– (a) One light or one fan point controlled by one switch. |
| 122 | All as per item No 120 above but one socket outlet 6 Amp controlled by one switch on the same board with other switches complete all as specified and directed. |
| 123 | All as per item No 120 above but one socket outlet 6 Amp controlled by one switch on indepdendent board complete all as specified and directed. |
| 124 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 2.5 sqmm, including PVC insulated FRLS copper earth continuity conductor 2.5 sqmm, colour-coded as per IS, drawn through existing rigid non-metallic PVC conduit/casing caping, medium grade, ISI marked, ivory colour, of size not less than 25 mm dia, with all necessary conduit fittings and fixing accessories, including sunken GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular accessories, complete for one 6A or 16 A socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 125 | S&F modular one-way switch, 10 Amp, 1-module size of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 126 | S&F modular one-way switch, 16 Amp, 1-module size, of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 127 | S&F modular socket outlet, 6 Amp, 2/3 pin combined, 2-module size, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 128 | S&F modular socket outlet, 6/16 Amp, 2/3 pin combined, 2-module size, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 129 | S&F modular bell push single pole one way 6/10 Amp, 240 volt,1 module, fuesh type complete all as specified and directed. |
| 130 | S&F modular one-way switch, 10 Amp, 1-module size of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 131 | S&F ceiling rose, 3-plate type, with insulated polycarbonate body, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 132 | S&F call bell AC single pole 240 volt ding dong type complete all as specified and directed. |
| 133 | S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed. |
| 134 | Supply and fixing in replacement of LED lamp 9/10/12 watt complete all as specified and as directed. |
| 135 | Supply & fixing in replacement of bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and directed. |
| 136 | Supply and fixing in replacement of wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V , minimum 100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements complete all as specified and directed. |
| 137 | Supply and Fixing in replacement of wall/surface mounting luminaires integrated LED Batten 20/22 W, 6500/4000 K/3000K,120 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed. |
| 138 | S& F in replacement of Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and directed. |
| 139 | Supply & fix in replacement of LED Ceiling /surface mounted down lighter warm white / white colour,12 to18 watt round/ squre profile,including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. |
| 140 | Supply and fixing in replacement of FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as specified and directed. |
| 141 | Supply and fixing in replacement of Material glass/plastic body led tube ,voltage range 220-240v-50hz ,cct 6500k,lumen ,wattage 20/22W surge 2.5kv ,CRI 70 POWER FACTOR >_0.9 ,BURING HOURS 25K HOURS 110 L/W ,6000 K with high efficency, with neccessary electrical connection incl disconnection old elecronic ballast if any complete all as specified and directed. |
| 142 | Taking down carefully sub-main wiring any type including dismantling of accessories and making good disturbed surfaces to match the existing complete all as specified and directed. |
| 143 | S&F sub main wiring with two single core PVC FRLS insulated multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4.0 sqmm nominal cross sectional area PVC FRLS insulated multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits and fittings complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire. |
| 144 | S&F sub main wiring with two single core PVC FRLS insulated multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6.0 sqmm nominal cross sectional area PVC FRLS insulated multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 25mm dia 'medium grade' PVC concealed conduits and fittings complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire. |
| 145 | S&F sub main wiring with two single core PVC FRLS insulated multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4.0 sqmm nominal cross sectional area PVC FRLS insulated multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC existingconduits and fittings complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire. |
| 146 | Supply and fixing in replacement for 1.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed. |
| 147 | Supply and fixing in replacement for 2.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed. |
| 148 | Supply and fixing in replacement for 4 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed . |
| 149 | S & F in replacement of three core PVC insulated FRLSH sheathed cable with 1.5 sqmm stranded copper conductor complete all as specified and as directed. |
| 150 | S&F in replacement 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular strande 10 sqmm aluminiuam conductor complete all as specified and as directed. |
| 151 | S&F in replacement of sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 152 | S&F in replacement of sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 153 | S&F in replacement of sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 154 | Supply and fixing in replacement of modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. |
| 155 | Supply and fixing in replacement of PVC casing and caping,15/ 20mm wide complete all as specified and directed. |
| 156 | S & F in replacement of switch piano flush button single pole one way 5/6 Amp 240 volt complete all as specified and directed. |
| 157 | S & F in replacement of switch piano flush button single pole one way 15/16 Amp 240 volt 2 hole/4 hole complete all as specified and directed. |
| 158 | S&F in replacement of socket outlet flush type multipurpose 2 in 1, 3 pin 5/6 and 15/16 Amp, 230 volts 2 hole/4 complete all as specified and directed. |
| 159 | S&F in replacement of unservicable socket outlet flush type multipurpose 2 in 1, 6pin 5 .Amp, 230 volts complete all as specified and directed. |
| 160 | S&F in replacement of switch socket outlet combination flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts 2 hole/4 complete all as specified and directed. |
| 161 | S&F in replacement of modular one-way switch, 10 Amp, 1-module size of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 162 | S&F in replacement of modular one-way switch, 16 Amp, 1-module size, of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 163 | S&F in replacement of modular socket outlet, 6 Amp, 2/3 pin combined, 2-module size, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 164 | S&F in replacement of modular socket outlet, 6/16 Amp, 2/3 pin combined, 2-module size, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 165 | S&F in replacement of modular bell push single pole one way 6/10 Amp, 240 volt,1 module, fuesh type complete all as specified and directed. |
| 166 | S&F in replacement of call bell AC single pole 240 volt ding dongType complete all as specified and directed. |
| 167 | S&F in replacement angle/batten type holder insulated body with back plate suitable for batten fittings complete all as specified and directed. |
| 168 | S&F in replacement PVC gang box fitted with and including piano type switch 5 A and socket 5 A, 230 Volts complete with pvc gitties and screws complete all as specified and directed. |
| 169 | S&F in replacement PVC gang box fitted with and including piano type switch 15 A and socket 15 A, 230 Volts complete with pvc gitties and screws complete all as specified and directed. |
| 170 | S & F in replacement of rectangular laminated hylum sheet top cover for switch sockets of size' (125mmx125mmx3mm) complete all as specified and directed. |
| 171 | Same as item 51 here in before but (200mmx125mmx3mm) complete all as specified and directed. |
| 172 | Same as item 51 here in before but (225mmx275mmx3mm) complete all as specified and directed. |
| 173 | Supply and fixing in replacement for flexible wire twin core copper,multistandard PVC insulatedunsheathed, cable 1100 volts grade complete all as specified and directed. |
| 174 | M & L for replacement of TPN MCB 100 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete conforming to IS 8828, IEC 60898 complete all as specified and directed. |
| 175 | M & L for replacement of TPN MCB 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete conforming to IS 8828, IEC 60898 complete all as specified and directed. |
| 176 | M&L in replacement of SP MCB 6 TO 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828, IEC 60898 complete all as specified and directed. |
| 177 | M&L in replacement of MCB Single Pole & Neutral MCB 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828, IEC 60898 complete all as specified and directed. |
| 178 | M&L in replacement of MCB Single Pole & Neutral MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828, IEC 60898 complete all as specified and directed. |
| 179 | M&L in replacement of MCB Single Pole & Neutral MCB 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828, IEC 60898 complete all as specified and directed. |
| 180 | Taking down carefully ceiling/Exhaust fan of any size and type and refixing on same or new location after oiling, greasing, Painting complete all as specified and directed. |
| 181 | S&F in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 06 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete and comprising of the following:- (a) MCCB 63-100 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, \\"C\\" curve, 10 KA breaking capacity - 16 Nos. NOTE FOR BOQ ITEM NO 01 TO 180: The Contractor shall provide and maintain the following furniture and electronic equipments etc. of following at its own cost. The contractor is advised to quote their rates will be considered in quoted rate against all BoQ items and no extra cost will be paid by govt of following. :- (i) Computer table with chair - 1 No. (ii) One additional table (4‘x3‘) with drawer along with one chair - 1 No. (iii) Visitors Chair - 4 Nos. (iv) All in one desktop with internet connection with printer and paper - 1 No (to be approved by GE).(v) KIOSK screen of size 600x900mm with suitable software for registering the complaints to be installed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender