Tender For Provn Of Hardstanding Near Shed No- A/8/12 Of Asc Bn (Mt) (Area 1000 Sqm Approx) At Pms Under Ge Panagarh
Tender Value
43.40 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
2 days left
EMD
86800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Hardstanding Near Shed No- A/8/12 Of Asc Bn (Mt) (Area 1000 Sqm Approx) At Pms Under Ge Panagarh
BOQ
| Sl. No. | Item Description |
| 1 | Excavation over area n.exc 1.50m deep and getting out soft/loose soil complete all as spd and directed. |
| 2 | Removing excavated material of soil n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as spd and directed. |
| 3 | M&L for rolling and consolidating road formation surfaces in cutting with 8 to 12 tonne power roller complete all as spd and directed. |
| 4 | M&L for pavings, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (ie 10% fly ash, 30% clinker and 60% stone dust ) laying in layers n. exc 10cm thick, watering, ramming and compacted with hand/power roller 8 to 12 tonn roller to required camber and gradient complete all as directed by Engineer-in-Charge. |
| 5 | M&L laying and compacting total 150mm compacted thickness (laid in two layers of 75mm each) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge Works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver / mechanical paver and rolling with vibratory roller of capacity 8 to 12 tonne static weight and consolidating to required gradient and camber, complete all as specified and directed. |
| 6 | M & L for PCC (1:3:6) Type C2 using 40 mm graded aggregate used as in sub base floor/pavings and finishing complete all as specified and as directed. |
| 7 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 8 | M&L for pre-polished factory made 80mm thickness precast concrete interlocking paver block (coloured) any size and shape with grey cement and pigment confirming to IS 15658-2006 of M-40 Grade complete all as specified and directed |
| 9 | M&LProviding and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified as directed. |
| 10 | Supplying and laying of PVC underground drainage sewer system pipe bearing 200 mm dia SN 4 including jointing with couplar, bend tee as per site requirement complete laid in trenches or floors complete all as specified and directed. |
| 11 | M&L, Brickwork with fly ash bricks, old size straight or curved on plan exc 6m mean radius, built in CM 1:6 complete, all as specified and as directed. |
| 12 | M&L Rendering 15 mm thick cement plaster in CM 1:6 on other than fair faces of brick/concrete work surfaces finished fair and even complete all as specified and directed. |
| 13 | M&L for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm width or girth and applying two coat of water based floor coat paint emulsion over one coat of self priming coat emulsion by diluting with 30% to 40% water complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L Cement concrete 1:3:6, type C-1(using 20mm graded stone aggregate) in surface channels and drains and Manholes complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender