Tender For Repair/Maint Of Internal Roads Including Kerb Stone, Interlocking Path, Drain Covers And Road Furniture At Certain Places Under The Aor Of Age B/R-I Under Ge (East) Agra
Tender Value
70 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
26 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Internal Roads Including Kerb Stone, Interlocking Path, Drain Covers And Road Furniture At Certain Places Under The Aor Of Age B/R-I Under Ge (East) Agra
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparing black-top surfaces by brushing with wire brushes to remove caked mud, sweeping with brooms, and cleaning the surface with air blower/power compressor through air jet to remove all loose dirt, dust and other foreign matter, complete all as specified and directed |
| 2 | Scarifying or picking graveled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm, exceeding 50 mm and not exceeding 100 mm deep complete all as specified and directed |
| 3 | M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 5 kg per 10 sqm over prepared black top surfaces by mechanical sprayer operated on hot pressure mechanism complete all as specified and as directed |
| 4 | M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 10 kg per 10 sqm over prepared WBM surfaces by mechanical sprayer operated on hot pressure mechanism complete all as specified and as directed |
| 5 | M&L for providing and laying 75 mm thick water-bound macadam (compacted thickness) in one layer, using stone aggregates of granite/trap/basalt, Grading 2 (63 to 40mm size) or Grading 3 (50 mm to 20 mm size), blinded with hard-stone screenings of Grading ‘A’, including spreading, watering, rolling with 8–12 tonne power road roller, filling and correcting hollows to form a true surface, and consolidating to the required gradient and camber, complete all as specified and directed. |
| 6 | M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removed caked mud etc sweeping with brooms and finally cleaning the surface with air compressor through air jet to remove loose dirt etc complete all as specified and directed |
| 7 | M&L for providing, laying, spreading premix bituminous macadam (Design mix) (consolidated thickness 75 mm or less) with 4% binder content using paving bitumen VG-30 grade by weight of total mix laid with self-propelled mechanical paver and rolled and compacted to required camber and gradient with 8 to 10 tonne power road roller and vibromax roller complete all as specified and directed.Note :- (i) Premix Bituminous macadam shall be obtained from hot mix plant and spreading shall be done with mechanical paver and asphaltic dense concrete work shall be done within 48 hours after completion of rolling and consolidation of bituminous macadam.(ii) The contractor shall quote the rate based on the binder content specified above. If the actual binder content used is found to be less than the specified binder content, the contract rate shall be reduced proportionately for the shortfall in binder content. However, no extra payment or price adjustment shall be admissible if the actual binder content exceeds the specified binder content.(iii) Job mix formula (design mix) of premix bituminous macadam shall be approved by GE. |
| 8 | M&L for providing, laying, spreading bituminous premix Semi-Dense Asphaltic Concrete (SDAC) (design mix), 30 mm consolidated thickness, with 5.5% binder content by weight of the total mix, using paving bitumen VG-30, laid with self-propelled mechanical paver, and rolled and compacted with 8 to 10 tonne capacity power road roller to the required camber and gradient, complete all as specified and directed.Note :- (i) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver.(ii) The contractor shall quote the rate based on the binder content specified above. If the actual binder content used is found to be less than the specified binder content, the contract rate shall be reduced proportionately for the shortfall in binder content. However, no extra payment or price adjustment shall be admissible if the actual binder content exceeds the specified binder content.(iii) Job mix formula (Design mix) of SDAC shall be approved by GE. |
| 9 | M&L for preparing road surfaces and applying thermoplastic reflective road marking, 2.5 mm minimum thickness in a single coat, as centre line, edge line or other road markings of 100 mm/150 mm width, using hot-applied thermoplastic reflective paint of approved make, in white or yellow colour, applied by self-propelled thermoplastic road marking machine, including premixing and application of all constituents such as binder, titanium dioxide, glass beads, calcium carbonate, fillers and additives, with glass beads conforming to BS 6088 and MoRTH Specifications, including surface preparation, application and simultaneous spraying of glass beads, complete in accordance with the manufacturer's instructions, complete all as specified and directed |
| 10 | S&F in repair solar cat-eye, with aluminium alloy housing, IP65 waterproof design, size 125 mm × 125 mm × 25 mm, with 65 mm shank, comprising high-efficiency monocrystalline solar panel rated 2.4 V/0.3 W, one Ni-Cd rechargeable battery rated 1.2 V/1600 mAh, and super-bright LED having luminous intensity of 10,000–18,000 mcd, installation as per manufacturer's instructions, complete all as specified and directed. |
| 11 | S&F in repair ABS plastic speed breaker/rubber rumble strip, size 500 mm (L) × 350 mm (W) × 50 mm (H), fixed to the road surface with suitable metallic bolts embedded in epoxy as per manufacturer's instructions, complete all as specified and directed.Note: Holes in the road surface shall be drilled using a suitable drilling machine and thoroughly cleaned with a blower before installation of the speed breaker/rubber rumble strip. |
| 12 | M&L for providing and laying thermoplastic rumble strips, 300 mm wide, on roads to form a series of raised, vibrating strips at regular intervals, using specialised thermoplastic application machinery for extrusion of hot thermoplastic material onto the road surface, including surface preparation, heating and melting of thermoplastic material, application at the specified thickness and spacing, application of glass beads for retro-reflectivity, and cooling and curing, complete all as specified, as per manufacturer's instructions and directed.Note:(i) Surface preparation: The road surface shall be cleaned thoroughly and made completely dry. In case of old asphalt surfaces, suitable primer shall be applied, where required, to ensure proper bonding.(ii) Heating of material: Thermoplastic material shall be heated and melted in a suitable specialised boiler at the manufacturer's recommended temperature, generally in the range of 180°C to 200°C, until it attains the required molten condition.(iii) Application: Thermoplastic rumble strips shall be applied using a specialised screed box or automated rumble-strip application machine capable of extruding the material at the specified thickness, generally 10 mm, and at the specified intervals. The individual strips shall be approximately 150 mm wide, or as specified in the drawings/site requirements.(iv) Application of glass beads: While the thermoplastic material is still hot, suitable retro-reflective glass beads shall be uniformly applied to the surface to provide adequate night-time visibility.(v) Cooling and curing: The applied rumble strips shall be allowed to cool and harden adequately before opening the road to traffic, in accordance with the manufacturer's recommendations and site conditions. Please Enable Macros to View BoQ information |
| 13 | M&L for providing and laying thermoplastic rumble strips, 300 mm wide, on roads to form a series of raised, vibrating strips at regular intervals, using specialised thermoplastic application machinery for extrusion of hot thermoplastic material onto the road surface, including surface preparation, heating and melting of thermoplastic material, application at the specified thickness and spacing, application of glass beads for retro-reflectivity, and cooling and curing, complete all as specified, as per manufacturer's instructions and directed.Note:(i) Surface preparation: The road surface shall be cleaned thoroughly and made completely dry. In case of old asphalt surfaces, suitable primer shall be applied, where required, to ensure proper bonding.(ii) Heating of material: Thermoplastic material shall be heated and melted in a suitable specialised boiler at the manufacturer's recommended temperature, generally in the range of 180°C to 200°C, until it attains the required molten condition.(iii) Application: Thermoplastic rumble strips shall be applied using a specialised screed box or automated rumble-strip application machine capable of extruding the material at the specified thickness, generally 10 mm, and at the specified intervals. The individual strips shall be approximately 150 mm wide, or as specified in the drawings/site requirements.(iv) Application of glass beads: While the thermoplastic material is still hot, suitable retro-reflective glass beads shall be uniformly applied to the surface to provide adequate night-time visibility.(v) Cooling and curing: The applied rumble strips shall be allowed to cool and harden adequately before opening the road to traffic, in accordance with the manufacturer's recommendations and site conditions. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender