Tender For Special Repair To Bldg No P19 Pobitora Kaziranga And Existing Bathrooms For Troops At The Office Complex Bldg No P11 Of Hq 51 Sub Area And Provn Of Interlocking Pathway 106M X 1.5M And Area 16X 80 From Gate No 2 To Mt Shed T29 Of Aro Na
Tender Value
47.79 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
8 days left
EMD
95580
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P19 Pobitora Kaziranga And Existing Bathrooms For Troops At The Office Complex Bldg No P11 Of Hq 51 Sub Area And Provn Of Interlocking Pathway 106M X 1.5M And Area 16X 80 From Gate No 2 To Mt Shed T29 Of Aro Na
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed |
| 3 | Demolition of brick work /stone masonry masonry built in cement mortar of any description all as specified and directed. |
| 4 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed |
| 5 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed |
| 6 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed |
| 7 | Demoition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed |
| 9 | Taking up or down 15mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 10 | Taking up or down 20 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 11 | Dismantling water tanks and removing to store (exc 500 and not exc 1000 ltr capacity) etc complete all as specified and as directed |
| 12 | Dismantling water tanks and removing to store (exc 1000 and not exc 2000 ltr capacity) etc complete all as specified and as directed |
| 13 | Demolition and breaking up drain pipes up to 100 mm dia bofe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and as directed |
| 14 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed |
| 16 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet) etc complete all as specified and as directed |
| 17 | Material and labour for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed |
| 18 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 19 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 20 | Supply and fix7 to 8 mm hollow profile thickness thick PVC Coloured Sheet (any Shape, coloured, pattern as approved ) suitably placed in false ceiling incl making sunken side corner, design as directed etc incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed |
| 21 | Material and labour for providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed |
| 22 | Material and labour for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooing etc complete all as specified and as directed |
| 23 | Material and labour for 100mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed |
| 24 | Material and labour for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed |
| 25 | Material and labour for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 26 | Material and labour for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and as directed |
| 27 | Material and labour for Screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and as directed |
| 28 | Material and labour for Rendering 10 mm thick in CM 1:3 for backing coat of tiles / dado etc complete all as specified and as directed |
| 29 | Material and labour for joint Free Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 30 | Material and labour Glazed ceramic tiles (Coloured) as in vertical surface 600X1200mmX7 to 9 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed |
| 31 | Material and labour Glazed ceramic tiles (Coloured) as in vertical surface 600X 300X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed |
| 32 | Material and labour for Virified Ceramic tiles (Drak Shade/ double Charaged/Ultra Charged ) 9 to 10 mm thick (square/ rectangular) polished, area of each tiles 800x1600mmX9 to 10 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 33 | All as per item no 32 avove but as in vertical surface etc complete all as specified and as directed |
| 34 | Material and labour 20mm thick Z Black granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round etc complete all as specified and as directed |
| 35 | Supply and fix for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over etc complete all as specified and directed. |
| 36 | Material and labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and as directed |
| 37 | Material and labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc complete all as specified and as directed |
| 38 | Material and labour Brickwork (Old size Brick)with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and as directed |
| 39 | Material and labour for Pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc complete all as specified and directed. |
| 40 | Material and labour Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished surfaces of concrete complete all as specified and directed. |
| 41 | Material and labour RCC (Nominal mix) type A-1, 1:1.5:3 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed. |
| 42 | Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 43 | All as per item No 42 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed |
| 44 | Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and fair (without using extra cement) etc complete all as specified and as directed |
| 45 | Material and labour for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 46 | Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and fair h (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 47 | Supply only water proofing compound (Liquid) complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 48 | Supply only water proofing compound (Liquid) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender