Tender For Repair To Joinery, Roofing And Other Misc Maintenance Works At Mountain Shadow Under Ge (Af) Borjhar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Oct 2026
8 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery, Roofing And Other Misc Maintenance Works At Mountain Shadow Under Ge (Af) Borjhar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including taking out existing hold fast etc. complete all as specified and as directed. |
| 2 | All as per Serial item 1.00 here-in-before but area exc. 1.50 Sqm but n. exc. 4 Sqm each. |
| 3 | Taking down of shutters of any description n exc 1 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge. |
| 4 | All as per Serial item No. 3.00 here-in-before but exc. 1 sq.m and n. exc. 2 sq.m each |
| 5 | Re-fixing in same opening serviceable shutter of any description not exceeding 1 Sqm each after easing & minor repairs complete all as specified and directed. |
| 6 | All as per Serial item No. 5.00 here-in-before but exc. 1 sq.m and n. exc. 2 sq.m each |
| 7 | Cutting holes in brick walls for inserting holdfasts and making good dismantled portion by filling cement mortar (1:3) or concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) exc half brick thick but n. exc. one brick complete all as specified and as directed. |
| 8 | M & L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 9 | S & F Flush shutters 18-19 mm thick, solid core construction, with block board core and ply wood face panels, commerical type on both sides for cup borad and similar work complete all as specified and directed. |
| 10 | Disantling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering complete all as specified and directed. |
| 11 | S & F pre-painted colored galvalume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 12 | S & F pre-painted color galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges , valley gutter etc fixed with self tapping screws as specified. |
| 13 | S&F for MS work of flat iron of size 30mm x 6mm thickness as in hold fast, confirming to Fe-410-0 (Grade-E-250 Quality-A) complete all as specified and as directed. |
| 14 | S&F in repair 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides including beeding if required complete all as specified and as directed. |
| 15 | Supply and fixing, in repair, 20 mm dia curtain rails/ drapery rod of powder coated aluminum alloy with fixing brackets complete all as specified and directed. |
| 16 | Supply and fixing in repair 100 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 17 | S & F for glazed and Skelton shutters 30mm thick of 2nd class hardwood,open rebated and prepared to receive glass, guaze etc (Without Sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); suppplied and fitted to chowkats complete all as specified and as directed. |
| 18 | S&F for 30mm thick second class hard wood glazed and skelton shutters for windows and ventilators, etc., open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (b); complete all as specified and as directed. |
| 19 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, and edges will be painted to match will printed sheet fixed in opening as per specification and drawings complete all as spcified and as directed. |
| 20 | Supply and fixed Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed. |
| 21 | S & F in repair for MS Helical door spring 300mm long tail pattern conforming to IS-452-1975 complete all as specified and as directed. |
| 22 | S & F MS Helical door spring 300mm long tail pattern conforming to IS-452-1975 complete all as specified and as directed. |
| 23 | S & F in repairs new floor door stopper of Aluminium alloy body and tongue, over all length of cover plate 150mm anodised with hard drawn steel spring, fixed to shutters complete all as specified and as directed. |
| 24 | S & F for door seal bottom made of aluminium body with nylon rubber bottom or bristles with not less than 94 cms in length for blocking of the entry of dust and crawling elements from under the door complete all as specified and as directed. |
| 25 | Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame including punching or drilling out old glazing pins/spring clips or fixed with putty or beads complete all as specified and as directed. |
| 26 | S&F for 3mm thick Sheet glass, ordinary quality and glazing with oil putty or with wooden beading are wooden frame or steel frame in square, area n. exc. 0.5 sq.m in each pane complete all as specified and as directed. |
| 27 | S&F for 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty or with wooden beads in square, area n. exc. 0.5 sq.m in each pane complete all as specified and as directed. |
| 28 | S&F as in repairs for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 29 | S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 30 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300 mm complete all as specified and as directed. |
| 31 | S&F in repairs of Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300 mm complete all as specified and as directed. |
| 32 | S&F for butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21 complete all as specified and as directed. |
| 33 | S&F in repairs for butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21 complete all as specified and as directed. |
| 34 | S&F MS butt hinges of size 75mm long, medium weight, cold rolled complete all as specified and as directed. |
| 35 | S&F in repairs of MS butt hinges of size 75mm long, medium weight, cold rolled complete all as specified and as directed. |
| 36 | S&F for Aluminium handles of size 150mm, cast type, anodised complete all as specified and as directed. |
| 37 | S&F in repairs for Aluminium handles of size 150mm, cast type, anodised complete all as specified and as directed. |
| 38 | S&F for 125mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 39 | S&F in repairs for 125mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 40 | S&F for 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 41 | S&F in repairs for 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 42 | S&F for 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 43 | S&F in repairs for 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 44 | S&F for 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 45 | S&F in repairs for 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 46 | M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete. |
| 47 | S&F mild steel framed work such as grills, gratings, etc. with ends of bars shoudered and/or riveted or forged in to spikes, framed guard bars, barred iron doors and similar works of Gde E-165 (Fe 290) including welding etc. complete all as specified and as directed. |
| 48 | M&L for preparation of new steel surfaces of any description, area over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 49 | Dismantiling of wall and ceiling boards (fiber, pulp, insulstion, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed |
| 50 | M&L for 4mm thick non asbestos fibre cement building designed boards, fixed or laid/ inserted to timber/GI/Aluminium framework with screws and fixed in celing flat or slope complete all as specified and as directed. |
| 51 | S&F of 605X605 mm anodised Aluminium snap grid frame work for false ceiling incl all required fixing accessories using necessary tools etc. complete all as specified and directed |
| 52 | Taking down rolling shutters of any description exc 2 sqm each and removing to store from site complete all as specified and as directed |
| 53 | S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type with 1.25 mm thickness of laths complete all as specified and as directed. |
| 54 | S&F ball bearing for rolling shutters as per existing size & make complete all as specified and as directed. |
| 55 | S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 56 | Dismantling of Stone slabs and tiles of any description or thickness in floors, Stepes, jambs , pillar, window cills , cooking platforms ,aprons etc including cement morter bedding and rubbish off the premises complete all as specified and as directed. |
| 57 | S & F 20 mm thk granite slab in Stepes, jambs , pillar, window cills , cookimng platforms ,aprons and like CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl grinding and polishing over and including 20mm screed bed in CM (1:6) complete all as specified and as directed. |
| 58 | Dismantling wrough iron or mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 59 | S & F MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender