Tender For Repair Maintenance Of Pump Motor And Maintenance/ Cleaning Of Reinforced Cement Concrete Oh Tanks, Ug Sumps And Other Connecting Accessories At Af Station Tezpur Under Ge (Af) Tezpur
Tender Value
35 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
12 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Maintenance Of Pump Motor And Maintenance/ Cleaning Of Reinforced Cement Concrete Oh Tanks, Ug Sumps And Other Connecting Accessories At Af Station Tezpur Under Ge (Af) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting electrical connections of mono block/ booster pump set with motor of capacity 5 HP, 3 Phase, 415 Volts, lifting and removing motor form its existing foundation to the location (inside/outside of building) where directed by the Engr-in-Charge, dismantling parts of the motor carefully, checking, segregating serviceable and unserviceable parts,cleaning the serviceable parts thoroughly as per OEM's recommendations, heating, drying, varnishing,insulating the windings with OEM approved insulating materials including replacement of unserviceable parts as required and including reassembling the motor, painting external surface with two coats of synthetic enamel paint after necessary preparation of surface, marking SM, MES or Srl No., installing to its existing foundation, commissioning, connecting up and testing, complete all as specified and directed.Note:-Spare Parts for replacement will be measured and paid seperately under respective items. |
| 2 | Disconnecting electrical connections of mono block/ booster pump set with motor of capacity 10 HP, 3 Phase, 415 Volts, lifting and removing motor form its existing foundation to the location (inside/outside of building) where directed by the Engr-in-Charge, dismantling parts of the motor carefully, checking, segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly as per OEM's recommendations, heating, drying, varnishing, insulating the windings with OEM approved insulating materials including replacement of unserviceable parts as required and including reassembling the motor, painting external surface with two coats of synthetic enamel paint after necessary preparation of surface, marking SM, MES or Srl No., installing to its existing foundation, commissioning, connecting up and testing, complete all as specified and directed.Note:-Spare Parts for replacement will be measured and paid seperately under respective items. |
| 3 | All as per items No 2.00 here-in-before but for mono block / booster pump set with motor of capacity 15 HP, 3 phase, 415 Volt, complete all as specified and directed. Note:-Spare Parts for replacement will be measured and paid seperately under respective items. |
| 4 | Disconnecting suction and delivery pipeline of pumps of capacity 10000 GPH at a head of 100 feet (Make Kirloskar/Beacon), lifting and removing from its existing foundation to the location (inside/outside building) as directed by Engr-in-Charge, dismantling carefully the pump completely checking and segregating serviceable and unserviceable parts, cleaning/washing and servicing the serviceable parts as per OEM's recommendations, replacing unserviceable parts and angle iron channel and making good surfaces of foundation, reassembling the pump completely including painting external surface of pump with MS foundation with two coats of synthetic enamel paint after preparation of surface and marking of SM, MES or Ser No., installing to its existing foundation, connecting up, testing and commissioning, complete all as specified and directed. Note:-Spare Parts for replacement will be measured and paid seperately under respective items. |
| 5 | Supply Only Chrome Steel Ball Bearing No. 6306.(Make: TATA/NBC/SKF) |
| 6 | Supply Only Chrome Steel Ball Bearing No 6307.(Make: TATA/NBC/SKF) |
| 7 | Supply Only Chrome Steel Ball Bearing No 6308.(Make: TATA/NBC/SKF) |
| 8 | Supply Only Chrome Steel Ball Bearing No 6309.(Make: TATA/NBC/SKF) |
| 9 | Supply Only Chrome Steel Ball Thrust Bearing No 51220.(Make: TATA/NBC/SKF) |
| 10 | Supply Only motor terminal box suitable for 10/15 HP, 3 Phase, 415 Volts electric motors. |
| 11 | Supply Only Shaft Key suitable for 5/10/15 HP, 3 Phase, 415 Volts electric motors. |
| 12 | Supply Only Coupling for pump motor (P45) suitable for 5/10/15 HP, 3 Phase, 415 Volts electric motors. |
| 13 | Supply Only Coupling for pump motor (D-50/70/80) suitable for 5/10/15 HP, 3 Phase, 415 Volts electric motors. |
| 14 | Supply Only Bolt/Studs for coupling of pump motor. |
| 15 | Supply Only rubber flange for coupling of pump motor (PX 45/ PX 50) suitable for 5/10/15 HP, 3 Phase, 415 Volts electric motors. |
| 16 | Supply Only CI flange for coupling of pump motor (PX 60/ PX 80) suitable for 5/10/15 HP, 3 Phase, 415 Volts electric motors. |
| 17 | Supply Only brass impeller suitable for pump with motor of capacity 10 HP. |
| 18 | Supply Only brass impeller suitable for pump with motor of capacity 15 HP. |
| 19 | Supply Only steel shaft suitable for pump with motor of capacity 10 HP. |
| 20 | Supply Only steel shaft suitable for pump with motor of capacity 15 HP. |
| 21 | Supply and Fix in repairs, spare coil, type MNX 25 suitable for 2 pole power contactors with AC-3 rating 25 Amps and AC-1 rating 45 Amps, complete all as specified and directed. [Cat No. CS94127 of Make “L&T” or equivalent Model of Make Siemens/ Schneider / ABB.] |
| 22 | Supply and Fix in repairs, 2 pole power contactors conforming to IS / IEC 60947-4-1 & IEC 60947-4-1, Type MNX 18-2P, AC-3 rating 18 Amps and AC-1 rating 30 Amps, auxillary contacts 1 NO, complete all as specified and directed. [Cat No.CS90236 of Make “L&T” or equivalent Model of Make Siemens/ Schneider / ABB.] |
| 23 | Supply and Fix in repairs, 2 pole power contactors conforming to IS / IEC 60947-4-1 & IEC 60947-4-1, Type MNX 25-2P, AC-3 rating 25 Amps and AC-1 rating 45 Amps, complete all as specified and directed.[Cat No.CS90240 of Make “L&T” or equivalent Model of Make Siemens/ Schneider / ABB.] |
| 24 | Supply and Fix in repairs, 3 pole power contactors conforming to IS / IEC 60947-4-1 & IEC 60947-4-1, Type ML 2, AC-3 rating 32 Amps and AC-1 rating 40 Amps, auxillary contacts 2 NO + 2 NC, complete all as specified and directed. [Cat No.SS90701 of Make “L&T” or equivalent Model of Make Siemens/ Schneider / ABB.] |
| 25 | Supply and Fix in repairs, 3 pole power contactors conforming to IS / IEC 60947-4-1 & IEC 60947-4-1, Type ML 3, AC-3 rating 40 Amps and AC-1 rating 45 Amps, auxillary contacts 2 NO + 2 NC, complete all as specified and directed. [Cat No.SS90721 of Make “L&T” or equivalent Model of Make Siemens/ Schneider / ABB.] |
| 26 | Supply and Fix in repairs, Electronic Timers, Type ST 100, 240 /415V, 50Hz, Time-Delay 3 - 30 secs/12 - 120 secs,operating voltage band of 160V to 500V with Star-Operation LED display to indicate Star to Delta changeover, complete all as specified and directed.[Cat No.ST80328OOOO/ST80329OOOO of Make “L&T” or equivalent Model of Make Siemens/ Schneider/ ABB.] |
| 27 | Supply and Fix, Fully Automatic Star Delta Motor Starter in sheet steel enclosure, suitable for Pump/Motor 3Ø, 415V,50Hz,10 HP, with over load relay range 6-10 Amps,coil voltage 360/440 V, type MK1, all as per Cat. No SS96255COVO/SS96255POVO of Make ‘L&T’ or Equivalent Model of Make Siemens/Crompton Greaves/BCH (Bharat Cuttler Hammer), complete all as specified and directed. |
| 28 | Supply and Fix, Fully Automatic Star Delta Motor Starter (With Wideband Coil) in sheet steel enclosure, with SPP features, for Maximum Submersible Pump Rating at 3Ø, 415V, 50Hz,15 HP,11 KW, with over load relay range 11-18 Amps, type MU-G15 FASD, all as per Cat. No CS94091SOCO of Make ‘L&T’ or Equivalent Model of Make Siemens/Crompton Greaves/BCH (Bharat Cuttler Hammer) complete all as specified and directed. |
| 29 | Disconnecting electrical connections carefully from the panel board and lifting of submersible pump motor of 15HP/20 HP capacity from existing bore well including column pipe with all accessories and removing the same to the location (inside/ outside building), complete all as specified and directed. |
| 30 | Dismantling carefully submersible pump completely of capacity 15 HP, 1320 LPM at a head of 63 Metres (Make KSB), checking and segregating serviceable and unserviceable parts, cleaning/washing and servicing the serviceable parts as per OEM's recommendations, replacing unserviceable parts, reassembling the pump completely including painting external surface of pump with two coats of synthetic enamel paint after preparation of surface, connecting up with all accessories, lowering in the existing bore well, testing and commissioning, complete all as specified and directed.Note:-Spare Parts for replacement will be measured and paid seperately under respective items. |
| 31 | Supply Only Neck Ring for submersible pump of 15 HP. |
| 32 | Supply Only GM Bushing for shaft of submersible pump of 15 HP. |
| 33 | Supply Only Key suitable for shaft of submersible pump of 15 HP. |
| 34 | Supply Only SS sleeve for shaft of submersible pump of 15 HP. |
| 35 | Supply Only pump cap for submersible pump of 15 HP. |
| 36 | Supply Only copper washer for submersible pump of 15 HP. |
| 37 | Supply Only nuts & bolts/stud suitable for bowl of submersible pump of 15 HP. |
| 38 | Dismantaling of parts, removing burnt out windings with insulating materials, cleaning throughly internally and externally, rewinding motor for centrifugal/mono block pump motor (Make:Kirloskar/ Beacon) of capacity 10 HP, 3 Phase, 415 V, 50 Hz, with super enamelled copper wires of existing size/gauge including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs recommendations, replacement of defective parts, re-assembling, including testing and commissioning, complete all as specified and directed. |
| 39 | Dismantaling of parts removing burnt out windings with insulating materials, cleaning throughly internally and externally, rewinding motor for centrifugal/mono block pump motor (Make:Kirloskar/ Beacon) of capacity 15 HP, 3 Phase, 415 V, 50 Hz, with super enamelled copper wires of existing size/gauge including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs recommendations, replacement of defective parts, re-assembling including testing and commissioning, complete all as specified and directed. |
| 40 | Dismantaling of parts, removing burnt out windings with insulating materials, cleaning throughly internally and externally, rewinding motor for submersible pump motor (Make:KSB) of capacity 7.5 HP, 3 Phase, 415 V, 50 Hz with PVC insulated copper wires of existing size/gauge including provision of all insulating materials, lubrication of bearing / bushes using fresh lubricant all as per OEMs recommendations, replacement of defective parts, re-assembling, including testing and commissioning, complete all as specified and directed. |
| 41 | Dismantaling of parts, removing burnt out windings with insulating materials, cleaning throughly internally and externally, rewinding motor for submersible pump motor (Make:KSB) of capacity 15 HP, 3 Phase, 415 V, 50 Hz with PVC insulated copper wires of existing size/gauge including provision of all insulating materials,lubrication of bearing / bushes using fresh lubricant all as per OEMs recommendations,replacement of defective parts,re-assembling,including testing and commissioning,complete all as specified and directed. |
| 42 | Dismantaling of parts, removing burnt out windings with insulating materials, cleaning throughly internally and externally, rewinding motor for submersible pump motor (Make:KSB) of capacity 20 HP, 3 Phase, 415 V, 50 Hz, with PVC insulated copper wires of existing size/gauge including provision of all insulating materials, lubrication of bearing / bushes using fresh lubricant all as per OEMs recommendations, replacement of defective parts,re-assembling, including testing and commissioning, complete all as specified and directed. |
| 43 | Overhauling/servicing of Granular Chlorine Solution Dosing System comprising of tank with agitator with shaft and blade mounted on tank with high pressure single head gear motored adjustable dosing pump with non metallic liquid ends including lead tubing connecting nuts, injection check valves, clay weight ferrule, suction and discharge tubing, spring loaded anti-syphon valve, foot valve etc., as per OEM's recommendations, including re assembling the dosing system, including testing and commissioning, complete all as specified and directed.Note:-Spare Parts for replacement will be measured and paid seperately under respective items of this BOQ here in after. |
| 44 | Supply Only oil seal for dosing pump motor. |
| 45 | Supply Only head screw for dosing pump motor. |
| 46 | Supply Only spacer for dosing pump motor. |
| 47 | Supply Only alter head screw for dosing pump motor. |
| 48 | Supply Only spring (small) for dosing pump motor. |
| 49 | Supply Only spring (retention) for dosing pump motor. |
| 50 | Supply Only diaphagm for dosing pump motor |
| 51 | Supply Only electronic pulser unit for dosing pump motor. |
| 52 | Supply Only transformer for dosing pump motor. |
| 53 | Supply Only shaft for dosing pump motor. |
| 54 | Supply Only inlet/outlet nozzle for dosing pump motor. |
| 55 | Disconnections of electric connection of jet pumping Set of capacity 1 HP, single phase, 240 Volts, lifting and removing motor form its existing foundation to the location (inside/outside of building) where directed by the Engineer-in-charge, dismantling the motor carefully, checking, segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly by rewinding of burnt out windings with super enamelled copper wires of existing size/ gauge including provision of all insulating materials and varnishing all as per OEM's recommendations and including replacement unserviceable parts as reuired and including reassembling the motor, painting external surface with two coats of synthetic enamel paint after necessary preparation of surface, marking SM, MES or Srl No., installing to its existing foundation, commissioning, connecting up and testing complete as specified and directed. Note:- Spare parts for replacement will be measured and paid seperately under respective itmes of this BOQ here in after. |
| 56 | Supply only ball bearing No. 6201 and 6202. Make : NBC/SKF/TATA |
| 57 | Supply only oil seal for jet pump set of 1 HP. |
| 58 | Supply only motor (PVC) cooling fan for motor of jet pump set of 1 HP |
| 59 | Supply only capacitor for motor of jet pump set 15-25 mfd, 440 V conforming to IS:1709. |
| 60 | Disconnecting electrical connections of monoblock pump set with motor of capacity 7.5 HP, Three Phase, 415 Volts, lifting and removing motor form its existing foundation to the location (inside/outside of building) where directed by the Engr-in-Charge, dismantling parts of the motor carefully, checking, segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly rewinding of burnt out windings with super enamelled copper wires of existing size/gauge including provision of all insulating materials and varnishing all as per OEM's recommendations and including replacement of unserviceable parts as required and including reassembling the motor, painting external surface with two coats of synthetic enamel paint after necessary preparation of surface, marking SM, MES or Srl No., installing to its existing foundation, commissioning, connecting up and testing complete as specified and directed.Note:-Spare Parts for replacement will be measured and paid seperately under respective items of this BOQ here in after. |
| 61 | Disconnecting electrical connections of monoblock pump set with motor of capacity 5 HP, Three Phase, 415 Volts, lifting and removing motor form its existing foundation to the location (inside/outside of building) where directed by the Engr-in-Charge, dismantling parts of the motor carefully, checking, segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly rewinding of burnt out windings with super enamelled copper wires of existing size/gauge including provision of all insulating materials and varnishing all as per OEM's recommendations and including replacement of unserviceable parts as required and including reassembling the motor, painting external surface with two coats of synthetic enamel paint after necessary preparation of surface, marking SM, MES or Srl No., installing to its existing foundation, commissioning, connecting up and testing complete as specified and directed.Note:-Spare Parts for replacement will be measured and paid seperately under respective items of this BOQ here in after. |
| 62 | Supply only Chrome steel ball bearing No 6203/6204. |
| 63 | Supply only oil seal for monoblock pump set of 5/7.5 HP |
| 64 | Supply only PVC cooling fan for motor of monoblock pump set of 5/7.5 HP. |
| 65 | Disconnecting electrical connections carefully from the panel board/starter and lifting of submersible pump motor of 15/20 HP capacity from existing bore well including column pipe with all accessories and replacement of existing unserviceable column pipe with 100 mm bore galvanised steel tubing, heavy grade, ISI Marked (IS: 1239-Part-I) both end flanged, in 08 (Eight) pieces of 3.00 Metre length each, fitted with flanges at both ends, complete with bolts, nuts, gaskets etc as required, lowering of pump motor in the existing bore well, reconnection to starter/panel board testing and commissioning, complete all as specified and directed. |
| 66 | Materials and labour for 100mm bore perforated galvanised steel tubing, medium grade of hole 70 mm c/c, with all fittings, fixed complete to walls and ceilings or laid in floors, including taking up or down existing steel tubing and connection including cleaning for re-fixing or removal from site of work, complete all as specified and directed. |
| 67 | Disconnections of electric connection of pumping Set, of Non clog cap 5 HP Pump & motor 3 phase 415 volts, lifting and removing motor form its existing foundation to the location (inside/outside of buildings) where directed by the Engr-in-charge. Dismantling the motor carefully, checking, segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Part like stator, rotor, terminal box, bearings, shaft, key etc) heating, drying and varnishing including replacement of burnt winding with super enameled copper wire of existing gauge and good quality of insulating materials including replacement of unservicealbe parts as required (New part shall be measured and paid saperately as supply only under BOQ Srl item No 05.00 to 20.00, re-assembling the motor, installing to its existing foundation, commissioning, connected up and testing, complete all as specified and directed. |
| 68 | All as Srl No 67 here-in-before but Non clog of cap 10 HP Motor, 3 Phase, 415 Volt, complete all as specified and directed. Make: Kirloskar |
| 69 | All as Srl No 67 here-in-before but Non clog of cap 12.5 HP Motor, 3 Phase, 415 Volt, complete all as specified and directed. Make: Kirloskar |
| 70 | Taking up or down 25mm bore galvanized iron/steel tubing from borewell and replacement of injector of size 25mm bore and re-fixing the same in position with all necessary conection, complete all as specified and directed. |
| 71 | Taking down / dismantling the gland of 10 HP/15 HP booster pump and replacement of CI gland after casting and grinding from lathe machine, refixing the same after repair including gland packing and rope as per entire satisfaction of Engr-in-Charge, complete all as specified and directed. |
| 72 | M&L for seven stage cleaning and sterllization inside the existing RCC overhead tank of capacity 100000 gallons through bacteriological treatment by using E-In-C Branch approved chemical as recommended by Engineer-In-Charge and ULTRA VIOLET LIGHT at Pump House No- 1A, 2A, 4 & 5 at any height (as per site requirement) as per the following description:- |
| 73 | (a) First stage is to drain out the water by using high capacity pump of dewatering system. |
| 74 | (b) Second stage is cleaning all the stage formation inside the tank by using TERBAC G5 or any other chemical as approved by E-In-C's Branch and recommended by Engr-in-Charge. |
| 75 | (c) Third stage is scrubbing the wall and floor with mechanised scrubber & fresh water cleaning by high speed jet pump (rotary & flat) to remove all scalling, angle and other formed particles on internal surface of the tank completely. |
| 76 | (d) Fourth stage and first and first bacteria screening is de-gemification by using TERBAC G5 or any chemical as approved byE-In-C`s Branch and recommended by Engr-in-Charge. |
| 77 | (e) Fifth stage is cleaning the floor of the water tank by heavy duty industrial vacuum cleaner and sludge sucker having maximum 1200W with suitable heavy duty rugged motor to free of any foreign and loose particles of any nature. |
| 78 | (f) Sixth stage is the second bacteria screening and sterillizing method by using ultraviolet ray by heavy duty UV radiation which shall be 360 degree of sterillization with in the tank to kill all suspended bacteria (The radiation shall portable and effective for sterillzation of drinking water tanks for dimination of floating and suspended bacteria). |
| 79 | (g) Seventh stage of cleaning and third bacteria screening is to sterillize the floor and wall of the water tank by using laboratory certified branded strong oxidizing agent TERBAC G65 or equivalent any non-toxic bio-degradable eco-frindly anti-bacterial agent certified by a Govt approved laboratory to disinfect the over head tank from all harmful pathogens. |
| 80 | Applying two coats of lime wash to the complete internal surfaces from the OHT after scraping of old surfaces and painting stair case railing over black painted surfaces with white letter complete all as specified and as directed. Note :- (i) All safety equipments required and necessary insurance for safety of working labour to execute the work shall be responsibility of the Contractor. (ii) Contractor will complete the work within 12 Hours after handing over of the OHT. |
| 81 | All as per items No 72 here-in before but overhead tank of capacity 50000 gallons at pump house No 2, 07, & 8 complete all as specified and as directed. |
| 82 | All as per items No 72 here-in before but overhead tank of capacity 20000 gallons at pump house No 6 & Sal forest complete all as specified and as directed. |
| 83 | All as per items No 72 here-in before but Under ground tank of capacity 20000 gallons at pump house No 6 & 8, complete all as specified and as directed. |
| 84 | All as per items No 72 here-in before but Under ground tank of capacity 50000 gallons at pump house No 7 & other locations, BMS, complete all s specified and as directed. |
| 85 | M&L for new ladder & taking down existing unserviceable ladder at OHT and underground sump as per eixisting specification with cross arms, Bracings, Supports, clamps and Back plates fabricated from structural steel sections (Fe 410-W, Gde E- 250, quality A) including nuts, Bolts, washer, welding, bending cold or hot, drilling holes for Bolts in any shape of size as indicated or directed and inclusive of One Coat of aluminium primer, One under coat and one finishing coat of Aluminium paint, complete all as specified and as directed. |
| 86 | Supply installation, commissioning and testing in replacement, including providing all necessary electrical connection, LT feeder pannel boad (CPRI Approved), indoor type, double door, compartmentlaised type, factory made out of 3.15 mm thick MS sheet of size 1.15m (height) x 0.9 m (width) x 0.2 m (depth) having hinge opening arrangement in front and bottom frame made out of angle iron of size 50x50x6mm thick and 04 nos legs 0.5 meter length with cable entry and exit circular hole with cable gland & gasket at bottom complete including painting to all internal and external exposed steel surfaces with powder coating paint (5 stage process) with duly fixed in ground with necessary PCC foundation (1:2:4) type B1, with danger notice plate of 1.6mm thick mild steel sheet, vitereous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs, bolts, screws etc complete and comprising of the following accessories including necessary excavation work for taking out cable loop and refilling the trenches all as directed including taking out existing rusted panel and removing from site, complete all as specified and directed. |
| 87 | BUS BAR CHAMBER |
| 88 | (a) Sheet steel bus bar chamber having front hinged covers with a set of electrolytic grade high conductivity TP & N solid anodized copper bus bars, rated 250 amps supported at required intervals sleeved with heat shrinkable PVC sleevings. The bars shall be colour coded at required intervals for identification - SET OF 4, 1 No. |
| 89 | INCOMING & OUTGOING |
| 90 | (a) On load change over switch open execution, four pole, Current Rating 100Amps, conforming to IS 13947 (Part-3)-1993, IEC 60947-3 all as per cat No CO58000OOOO of Make L&T or any equivanlent Model - 01 No |
| 91 | (a) MCCB 100A Fixed type, 415 Volts 4 pole, 36 KA - 01 Nos |
| 92 | (b) 15 HP Star Delta Starter- 02 Nos, Make L&T |
| 93 | (c) MNX 25 TP contactor - 06 Nos, Make L&T |
| 94 | (d) Overload relay 14 to 25Amps - 02 Nos |
| 95 | (e) AUX contact 1NO + NC- 04 Nos, Make - L&T |
| 96 | (f) Start Push button with element - 2 Nos |
| 97 | (f) Stop Push button with element - 2 Nos |
| 98 | (g) Star Delta Timer - 02 Nos |
| 99 | (h) 10 HP Star Delta Starter - 01 Nos Make - L&T |
| 100 | (j) MNX 22 TP contactor - 3 Nos |
| 101 | (k) Overload relay 9 to 15 Amps |
| 102 | (k) AUX contact 1NO + NC- 02 Nos, Make - L&T |
| 103 | (l) Start Push button with element - 1No |
| 104 | (m) Stop Push button with element - 1 Nos |
| 105 | (n) Star Delta Timer - 01 Nos |
| 106 | (o) MCB 6Amps 10KA - 03 Nos |
| 107 | (p) Single Phase preventer -03 Nos |
| 108 | (q) CT-100/5A - 05 Nos |
| 109 | INDICATING DEVICES |
| 110 | (a) LED Indicating lamps for Main Supply indicating R', Y' B' - Set of 3. |
| 111 | (b) Digital Voltmeter (96mmx96mm) 0-500 Volt with selector switch of 10 Amps -1No. |
| 112 | (d) Digital Ammeter 0 to 400 Amps, square type (96mmx96mm) - 01 No. (Make: AE/RISHABH/CONZERV/L&T) |
| 113 | (e) Voltmeter Selector switch (6A) 3 position with 'OFF' - 01 No.(Make : KAYCEE/L&T) |
| 114 | (f) Ammeter Selector switch (6A) 3 position with 'OFF' - 01 No.(Make : KAYCEE/L&T) |
| 115 | Transportation of scaffolding material and Providing, erecting, maintaining steel tubular scaffolding up to 15 mtr height with working platforms, guard rails, toe boards, ladders, couplers and all necessary fittings safety net, lifeline and safety harness to replace or repair the pipe line work and dismantling the scaffolding items after completion of repair works, complete all as specified and directed by Engr-in-charge. Note : Repair works will be measured and paid separately. |
| 116 | Materials and Labour for 100 mm bore centrifugally cast (spun) double flange ductile iron pressure pipes for water mains, with flange type both ends, class K9, ISI Marked [IS 8329:2000 (Reaffirmed 2005)], in any length, jointed by flexible joints with rubber gaskets and nutbolts conforming to IS 5382, laid in wall/ trenches, complete all as specified and directed. |
| 117 | Materials and Labour for 150 mm bore, centrifugally cast (spun) double flange ductile iron pressure pipes for water mains, with flange type both ends, class K9, ISI Marked [IS 8329:2000 (Reaffirmed 2005)], in any length, jointed by flexible joints with rubber gaskets and nutbolts conforming to IS 5382, laid in wall/ trenches, complete all as specified and directed. |
| 118 | Supply only single phase self -priming dewatering pump 1 HP single phase 220 volts suction and delivery 40mm, self priming, portable dewatering pump complete with motor, pump, base, coupling and all standard accessories, suitable for removal of groundwater/iron-bearing water from valvepits, designed to prevent overloading, complete all as specified and directed. Make : Kirloskar Model SP-0M or equivalent in other approved makes. |
| 119 | Supply only single phase self -priming dewatering pump 0.5 HP single phase 220 volts suction and delivery 40mm, self priming , portable dewatering pump complete with motor, pump, base, coupling and all standard accessories, suitable for removal of groundwater/iron-bearing water from valvepits, designed to prevent overloading, complete all as specified and directed. make : Kirloskar Model SP-05M or equivalent in other approved makes. |
| 120 | Supply only 40mm dia heavy-duty flexible reinforced suction hose suitable for dewatering service complete with 40mm foot valve/strainer, hose couplings and heavy duty clamps, complete all as specified and directed. |
| 121 | Supply only 40mm dia heavy-duty flexible delivery hose suitable for dewatering service complete with quick release couplings and heavy duty clamps for discharge upto approximately 50mtr, complete all as specified and directed. |
| 122 | Supply and fix 40mm dia foot valve with strainer suitable for suction hose heavy duty, complete all as specified and directed. |
| 123 | Supply and fix portable electric starter control box for 1 HP motor complete with MCB/overload protection ON/OFF switch and necessary electrical accessories, complete all as specified and directed. |
| 124 | Supply and fix portable electric starter control box for 0.5 HP motor complete with MCB/overload protection ON/OFF switch and necessary electrical accessories, complete all as specified and directed. |
| 125 | Supply only granular calcium hypochlorite with 65% to 70% available chlorine content and with maximum moisture content 10% suitable for disinfection of drinking water, complete all as specified. Note - Chemical shall be supplied in sealed HDPE containers weighing 45 Kgs / container. |
| 126 | Supply only Alumino Ferric Acid Grade 4 (Best quality as per sample with additional requirement for purification of water containing lead (as Pb) 30PPM max and arsenic (As 203) 6 PPM max confirming revised IS 299-2012, complete all as specified and directed. |
| 127 | Supply only poly aluminium chloride powder (raw water flocculant powder), complete all as specified and directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender