Tender For Special Repair Of Bldg No P-15/1 (Religious Institute) At 119(I) Inf Bde C At Mil Stn Pithoragarh Under Ge(Mes) Pithoragarh
Tender Value
38.50 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
11 days left
EMD
77000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Bldg No P-15/1 (Religious Institute) At 119(I) Inf Bde C At Mil Stn Pithoragarh Under Ge(Mes) Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 3 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 4 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 5 | Taking down shutter of any description exc. 1.0 Sqm but n.exc 2.0 Sqm each and removing from site complete all as specified and directed. |
| 6 | Taking down shutter of any description exc 1.00 but not exc 2.00 sqm each and refixing in same opening with easing and adjusting complete all as specified and directed. |
| 7 | Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed. |
| 8 | Dismantling of cast iron/ PVC /AC /SGSW pipes alongwith fittings and accessories upto 100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed. |
| 9 | Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge |
| 10 | Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in any type of soil, complete all as specified and directed by Engineer-In- Charge. |
| 11 | Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in anhy type of soil complete all as specified and directed by Engineer-In- Charge. |
| 12 | Removing excavated material exceeding 250M but not exc 500m and depositing where directed. Complete all as specified and directed by Engineer-In- Charge. |
| 13 | M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engr-In- Charge. |
| 14 | M&L for 100mm thick PCC(1:3:6) type C2 using 40mm graded stone aggregate as in sub base of floor etc |
| 15 | M&L for 50 mm thick sand cushioning laid dry to the profile under interlocking block complete all as specified and as directed. |
| 16 | M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness,with minimum compressive strength of 35N/sqmm (M-35 grade) without correction factor for chamfering,made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface,with white cement and pigment complete incl taking down old paver block of any shape and size all as specified and directed. |
| 17 | M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10 cm in width, 25 cm in depth, 15cm in height and setting in mortar 1:6 . |
| 18 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/ dense soil all as spd and directed |
| 19 | M&L PCC 1:2:4 type B-2 using 20mm graded stone aggregates as in foundation, posts filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for hardcore broken stone boulders broken to guage n exec 63 mm all as spd and directed |
| 21 | M&L for 25mm thick PCC(1:2:4) type B0 using 12.5mm graded aggregate as in sub base of floor etc complete all as specified and directed. |
| 22 | M&L for 75mm thick PCC (1:4:8) type D2 using 40mm graded aggregate as in sub base of floor etc complete all as specified and as directed |
| 23 | M&L PCC D 2, 1:4:8 75 mm th (40mm graded aggregate) in floor sub base etc complete all as specified and directed. |
| 24 | S& F Heavy duty outdoor tiles of size 600 X 600 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed. |
| 25 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc complete all as specified and directed. |
| 26 | S&F MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars etc fixed indepently or framed or without connecting plates,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge |
| 27 | M&L Plates (plain or chequered) channels Fe 410-W (Gde E-250) quality B. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. |
| 28 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surface complete all as specifed and directed. |
| 29 | M & L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, Parapet walls and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and including 20mm thick screed in CM 1:6 complete all as specified and directed. |
| 30 | M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile not exceeding 0.11 sqm over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match the shade, including dismantling tile complete all as specified and directed |
| 31 | M & L, glazed joint free coloured ceramic tiles in vertical surface as in skirting & dado,450X 300 X 7 to 8 mm thick over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed. |
| 32 | M & L 16 to 18 mm thick granite( colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /platform counter top WHB including cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge. |
| 33 | M&L 75mm thick PCC 1:3:6 type C-2, (20 mm graded stone aggregate)as plinth protection and finishing even and smooth without using extra cement incl making joints 12 mm wide of full depth of PCC at every 3 meters and at every change in direction and filling the same with sealing compund grade 'A' incl necessary formwork. Complete all as specified and directed. |
| 34 | Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified. |
| 35 | M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed. |
| 36 | M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair. Complete all as specified and directed. |
| 37 | M&L for extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work not exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends etc.complete all as specified and as directed |
| 38 | Preparation of old wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint . Complete all as specified and directed. |
| 39 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 40 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 41 | S&F Aluminium annodised barrel tower bolt of extruded section and fixed 200 mm size with bright bolt etc complete all as specified and directed. |
| 42 | S & F 250mm Aluminium alloy anodised sliding door bolts with hasp,staple(bolt type)and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or aluminium alloy and fixed. |
| 43 | S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 44 | S&F powder coated anodised aluminium window and ventilator shutters (powder coating of any colour, thickness or powder coating not less than 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified. |
| 45 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators , fixed glazing etc including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief |
| 46 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. 0.5 sqm each pane complete all as specified and directed. |
| 47 | S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed. |
| 48 | Supply & Fix 1000 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position including dismantling of existing water tanks complete all as specified and directed. |
| 49 | S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed |
| 50 | S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed. |
| 51 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 52 | S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete. |
| 53 | Taking up or down 15 mm steel tubing and connections complete all as specified and directed. |
| 54 | Taking up or down 20 mm steel tubing and connections complete all as specified and directed. |
| 55 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth |
| 56 | S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors, complete complete all as specified and directed |
| 57 | S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors, complete all as specified and directed |
| 58 | S&F in repairs Oval type Wash Hand Basin (Counter Top) superior quality 550 x 400 mm size fitted and including 15 to 18 mm thick granite top over RCC slab incl waste coupling 150mm long complete all as specified and directed. |
| 59 | S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 60 | S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 61 | S & F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 62 | S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed |
| 63 | S & F in repairs SS Soap dish, , approximate size 160x 160x90mm complete all as specified and directed. |
| 64 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed. |
| 65 | S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed. |
| 66 | S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 67 | S&F in repairs, 75mm bore PVC(SWR) Reducer, TEE, Y, etc complete all as specified and directed. |
| 68 | S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed. |
| 69 | S&F in repairs, 110mm bore PVC(SWR) Acess door bends any radius, complete all as specified and directed. |
| 70 | S&F in repairs, 110mm bore PVC(SWR) Reducer, TEE, Y, etc complete all as specified and directed. |
| 71 | S&F in repairs, 75mm bore PVC(SWR) vent cowl complete all as specified and directed. |
| 72 | Supply & Fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe ,with PVC cover sheet in same colour etc complete all as specified and directed. |
| 73 | S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. |
| 74 | Dismantling of plain or corrugated steel sheeting any guage thickness including nanital or similar pattern roof covering complete all as spd and directed |
| 75 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 76 | S & F pre-painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 77 | S&F framed work as in doors or gates of angle or other section Fe 410 W Gde E 250 with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 78 | M&L for applying two coat exterior emulsion paint on newly plastered wall surface over a coat of primer after applying wall care putty of 1-1.5mm thickness prepared and sanded , complete all as specified and directed.. |
| 79 | M&L for complete removal of existing treatment and applying two coat exterior emulsion paint on old plastered wall surface after preparing old surface and applying one coats of wall care putty of 1-1.5mm thickness prepared and sanded complete all as specified and directed. |
| 80 | M&L for applying two coat OBD on newly plastered wall surface over a coat of primer after applying one coat of wall care putty of 1-1.5mm thickness prepared and sanded ,complete all as specified and directed. |
| 81 | M&L for complete removal of existing treatment and applying of two coat OBD on wall surface over a coat of primer applied after one coat of wall care putty of 1-1.5mm thickness prepared and sanded ,complete all as specified and directed |
| 82 | M&L for complete removal of existing treatment and applying of two coat OBD on ceilling over a coat of primer applied after one coat of wall care putty of 1-1.5mm thickness prepared and sanded ,complete all as specified and directed |
| 83 | Surface excavation n exc 30 cm deep and averaging 15 cm and getting out in any type of soil complete all as specified. |
| 84 | Desludging/desilting of 150 mm dia sewage lines including manholes, up to 2.0 m depth by removing blockage if any by means of rodding manually or mechanically by pumping out water where required and removing residual silt/mud/peat/sludge out side of defence land complete all as directed by Engr-in-charge. Note:The work has to be carried under foul condition, hence the rate to be deemed included.Nothing extra shall be paid to the contractor on this account |
| 85 | M/L PCC 1:3:6 type C0 ( using 12.5 mm thick graded stone aggragate) as in surface channel drain. Etc complete all as specified and directed. |
| 86 | M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping/bedding including weathering, throating and necessary form work complete all as specified and directed. |
| 87 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds mitred/ stoped ends etc. |
| 88 | Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in anhy type of soil complete all as specified and directed by Engineer-In- Charge. |
| 89 | Removing excavated material exceeding 250M but not exc 500m and depositing where directed. Complete all as specified and directed by Engineer-In- Charge. |
| 90 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, canopies, deck slabs and in shelves and like in repair to Chajjas, Claddings, soffits etc including bonding agent, complete all as specified and directed. |
| 91 | M&L for form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed. |
| 92 | M & L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed. |
| 93 | M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete incl welding etc (if reqd) all as specified and directed. |
| 94 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and removing material for taking credit (credit for material should be made as per condition sepretly) and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified. |
| 95 | Point wiring in replacement of one light point/fan/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size min 20 mm dia or higher with all fittings (ISI Marked) controlled by one switch including GI modular sunken box of thickness not less then 1.2 mm with cover frame(Inner/Outer) for mounting modular type switches, socket and regulators , including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. |
| 96 | All as per item no-2 but Point wiring in replacement for one 3 pin 15A socket outlet independent with 2.50 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 2.50 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in incl PVC conduit medium grade of 20 mm dia or higher with all fitting (ISI marked) .all as required at site or directed. |
| 97 | All as per item no-2 but Point wiring in replacement for one 3 pin 5A socket outlet independent with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl PVC conduit medium grade of 20 mm dia or higher with all fitting (ISI marked) .all as required at site or directed. |
| 98 | All as per item no-2 but Point wiring in replacement for for one 5A socket outlet on the same board with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl PVC conduit medium grade of 20 mm dia or higher with all fitting (ISI marked) .all as required at site or directed. |
| 99 | S&F in Repair for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 6 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 25 mm dia or higher cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed. |
| 100 | S&F switch modular type single pole one way 1 module 6 amps 240 volts. |
| 101 | S&F switch modular type one way 1 module 16 amps 230 Volts. |
| 102 | S&F socket 6 amps modular type 2/3 pin combined 2 module , 230 volts. |
| 103 | S&F socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts. |
| 104 | S&F Modular type Electronic fan regulator stepped type,two module with five step 240 volts,100Watt suitable for 1200/1400 mm sweep AC ceiling fan complete, all as directed by Engineer in charge. |
| 105 | Taking down Celing Fan any Sweep from the exsisting site and keep safe and under custody and complete cleaning, Oiling ,Greasing ,including replacement of capacitor , bearing and nut washet bolt and clamps of fan and Refixing fan including hanging rod, down rod as existing location and connection to celing rose with copper wire twin core complete all as specified and directed. |
| 106 | S&F in Repair of Tube light fitting integrated type suitable for LED 20 W(4 feet) efficacy min 100 lumens/watt, indoor decorative LED batten complete with Aluminium housing with surge protection of 2.5 KV, P.F.> .95, IP 20, CRI>80, Flicker free, Life time min 50000 burning hrs CCT 3000K/4000K/5700K / 6500K and thermal management heat sink such that junction tempraure will not exceed 90 degree and all accessories pre wired and making connection with cord flexible copper cable of suitable size from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 107 | S&F in Repair of Tube light fitting integrated type suitable for LED 10 W (2 feet) efficacy min 100 lumens/watt, indoor decorative LED batten complete with Aluminium housing with with surge protection of 2.5 KV, P.F.> .95, IP 20, CRI>80, Flicker free, Life time min 50000 burning hrs CCT 3000K/4000K/5700K / 6500K and thermal management heat sink such that junction tempraure will not exceed 90 degree all accessories pre wired and making connection with cord flexible copper cable of suitable size from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 108 | S&F in Repair of LED light fitting recess mounted min 32/36 Watt, 6500 K 2' x 2' with surge protection with surge protection of 2.5 KV, P.F.> .95, IP 20, CRI>80, Flicker free, Life time min 50000 burning hrs CCT 3000K/4000K/5700K / 6500K and high voltage protection up to 380 VAC and all accessories suitable for amstrong/grid/POP ceiling complete with integrated electronic driver and making electrical connection properly all as directed. |
| 109 | S&F of LED bulk head fitting with opal diffuser min 10 Watt, 6500 K, IP-65, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, with Aluminium housing of efficient heat dissipation and integrated electronic driver with surge protection complete connecting electrically all as directed. |
| 110 | Supply and fixing in Repair LED street light fitting 60 Watt 230 V AC, in multiple optics,Outdoor type with high pressure die cast aluminum housing, IP-65, with 4 KV inbuild surge protection driver and heat resistant complete with driver, fixing the same by GI pipe medium grade minimum 25 mm dia bore pipe with two nos FI clamps of 40X4 mm duly painted and suitable size of nut and bolts etc and making poper electric connection with three core flexible copper wire complete all as specified and directed. |
| 111 | S&F in Repair of TPN DB, 4 Way, as per IS-8523, IP-42 protection, universal mounting with 200A copper bus bar with neutral bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for MCB TPN as incomer and MCB TPN/MCBs as outgoing, with and including provision for MCCB/MCBs & making necessary electrical connection for Incoming & outgoing cables, with copper lugs, crimped with crimping tool |
| 112 | S&F in Repair of MCB C- Curve of four pole TPN, 415 Volts, 100 Amp ultimate breaking capacity (Icu)-10 KA. |
| 113 | S&F in Repair of sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification . |
| 114 | S&F in Repair of MCB SP of 6 to 32 Amp rating 240,10 KA C- curve with connection testing and commisioning. |
| 115 | S&F in Repair of MCB SPN of 40-63 Amp rating 240,10 KA C- curve with connection testing and commisioning. |
| 116 | M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion. |
| 117 | Supply and fixing in repair LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete. |
| 118 | Supply and fixing in repair Exhaust fan , steel body AC single phase 230 V of size 300 mm sweep with blade and frame and louvers shutter with making proper hole as requried at site. All as specified and directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender