Tender For Construction of Psmip In Tehsil Nurpur Distt. Kangra (Hp)(Sh:- Construction of Chowkidar Quarter
Tender Value
8.15 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
8 days left
EMD
16303
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Psmip In Tehsil Nurpur Distt. Kangra (Hp)(Sh:- Construction of Chowkidar Quarter
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc.(in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer –in-charge in all leads and lifts. |
| 2 | Providing and laying cement concrete 1:6:12 (1Cement:6sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work foundation and plinth in all leads and lifts |
| 3 | Square rubble stone masonry coursed with hard stone of approved quality in foun. & plinth i/c racking out of joints in CM 1:6 in all leads & lifts |
| 4 | Providing and laying damp proof course 38mm thick with cement concrete 1:2:4 (1cement:2sand:4 graded stone aggregate 12.50 mm nominal size and curing complete in all leads and lifts. |
| 5 | Applying a coat of hot bitumen (mexphalt 80/100 equivalent) using 1.70 kg. per Sqm. on damp proof course after cleaning the surface with af loating piece of cloth lightly socked in Kerosene oil in all leads and lifts. |
| 6 | Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts. |
| 7 | Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position with second class deodar wood in all leads and lifts. |
| 8 | Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts. |
| 9 | Prov. & fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 G. with wire of dia. 0.56 mm for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws. |
| 10 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain. |
| 11 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness. |
| 12 | Beams,cantilevers,girders & lintels, sides & soffits of beams, haunching,cantilevers,bressumers 1.00 mts. In depth in all heights from floor. |
| 13 | Providing and laying cement concrete work 1:2:4(1cement:2sand: 4 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 14 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level. |
| 15 | Providing and laying cement concrete work 1:1.5:3(1cement:1.50 sand: 3 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 16 | (a) Lintels, beams ,griders bressumers and cantilevers upto all floor level. |
| 17 | Providing & laying marble work (in tabled rubbed & polished) in flooring 20 mm thick base in Cm 1:3 including joiting with cement mortor 1:2 ( ! White cement :2 marble dust) with an admixture of pigment to match the shade of marble. (White makrana marble) |
| 18 | 20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar4 1:6(1cement:6sand) kin all leads and lifts. |
| 19 | 6 mm cement plaster to ceiling in CM 1:4 (1Cement :4 Sand) |
| 20 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts. |
| 21 | Providing Tor steel reinforcement for RCC work including bending,binding & placing in position complete upto floor two level. |
| 22 | Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts. |
| 23 | Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts. |
| 24 | Appling Birla white wall care putty over plaster surface after throughly rushing the surface free mortar drop, dust,loose materialsand other foreign matters sand papered smooth to govbe final matter fnish to the surface complete in all respect within all lead and lifts as per the direction of the Engineer in charge. |
| 25 | Applying Priming coat over new steel and other metal surface after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. |
| 26 | Painting Two coat (excluding priming coat ) on new steel & other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of dirt and other foreign matter. |
| 27 | Wall painting(two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete in all respect as per the satisfaction of the Engineer-in-charge. ( interior side) |
| 28 | Wall painting(two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete in all respect as per the satisfaction of the Engineer-in-charge. ( Exterior side) |
| 29 | Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete. |
| 30 | Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size. |
| 31 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete |
| 32 | Sliding door bolts 250x16mm. |
| 33 | M.S. tower bolts (Barrel type) leads and lifts. 200x10mm. |
| 34 | M.S. handles 125mm dia |
| 35 | M.S. handles 100mm dia |
| 36 | Providing & fixing MS grills of required pattern in wooden frames of windows etc.with MS round headed bolts & nuts or by screws (Ornamental Grills) |
| 37 | Stone/Boulder filling under floors/behind retaining walls. |
| 38 | Providing and laying PVC pipe 100 mm dia complete in all respect. |
| 39 | Providing and fixing 1mm thick MS sheet sliding shutters with frame and diagonal braces of 40x40x 6mm angle iron 3.15mm MS gusset plates at junction and corners 25mm dia pulley 40x40x6mm angle and T.iron guide at the top and bottom respectively , including applying a priming coat of red lead paint. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender