Tender For Construction Of New Civil Hospital At Dhar Ur Tehsil Dhar Ur Distt. Mandi Hp ( 100 Bedded Hospital) ( Sh :- Construction of Balance Work I.E. Building Portion, W.S.& S.I. And Rain Water Harvesting Tank)
Tender Value
3.81 Crore
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
7.64 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Civil Hospital At Dhar Ur Tehsil Dhar Ur Distt. Mandi Hp ( 100 Bedded Hospital) ( Sh :- Construction of Balance Work I.E. Building Portion, W.S.& S.I. And Rain Water Harvesting Tank)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means(Hydraulic excavator)/ manual means infoundation trenches or drains (not exceeding 1.5m ( one point five metre) in width or 10 sqm ( ten square metre) on plan,including dressing of sides and ramming of bottoms, lift upto 1.5 m ( one point five metre), including getting out the excavated soil and disposal of surplus excavated soils as directed withina load of 50 meter, including entire carriage of material within all leads and lifts to dumping site arranged by contractor and other incidentals. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 2 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m( one point five metre) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm ( twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc.and disposing of surplus excavated soil as directed, within all leads and lifts Pipes, cables etc. exceeding 80 mm ( eighty millimetre) dia. but not exceeding 300 mm ( three hundred millimetre) dia including entire carriage of material within all leads and lifts and other incidentals. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 3 | Centering and shuttering including shuttering, Proping etcetra and removal from for all heights including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 4 | Suspended floors, roofs, landings, balconies and access platform |
| 5 | Shelve (In cast Situ) |
| 6 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 7 | In Columns, Pillars, Piers, Abutments, Posts and Struts |
| 8 | Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses plinth and string courses etcetra and the like in all floor heights. |
| 9 | Small lintels not exceeding 1.5 m clear span, moulding, window cills etc. |
| 10 | Stair Case with sloping or stepped soffits excluding landing except spiral stair upto all floor level. |
| 11 | In edges of slabs and breaks in floors and walls under any width/ height upto all floor level. |
| 12 | Providing and laying in position cement concrete of specified grade mechanically mixed cement concrete 1:4:8 (One cement: four sand : eight graded/crushed stone aggregate 40mm (forty millimetre) nominal size) as per specification and curing complete but excluding cost of form work in all work up to plinth level including all heights/depths including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 13 | Providing and laying in position cement concrete of specified grade mechanically mixed cement concrete 1:3:6 (One cement: three sand:six graded/crushed stone aggregate 20mm (twenty millimetre) nominal size) as per specification and curing complete but excluding cost of form work in all work up to plinth level including all heights/depths as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 14 | Providing and laying reinforced cement concrete mechnically mixed vibrated design mix M-30 (thirty) grade cement concrete for reinforced cement concrete work with minium cement contents not less then 425Kg/Cum (Four hundred twenty five killogramme per Cubic metres) using cement content as per approved design mix work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 15 | Providing and laying Twisted steel/deformed TMT steel bars Fe 500D made of SAIL/TISCO/ TATA /RINL or equivalent steel reinforcement for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding in foundation complete including the cost of binding wire all complete above plinth level upto all floor levels as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 16 | Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.300 mm wide including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five)in superstructure above plinth level up to all floor level in all shapes and sizes in in cement mortar 1:6 (one cement : six sand) curing complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 18 | Half brick masonry with common burnt clay F.P.S. (non modular) of class designation 7.5( seven point five) in Cement Mortar 1:4 (One cement: four sand) and curing complete in super structure above plinth level upto all floor level including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 19 | Extra forforming cavity 5cm( five centimetre) to11.5cm ( eleven point five centimetre)wide incavity wallswithnecessaryweepcoated M .S.ties300mm (three hundred millimetre) long of 25x3 mm ( twenty five into three millimetre) section at not less than 3(three) ties per sqm as per approved design including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 20 | Stone soling/boulder filling dry hand packed in under floor as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals including centring, shuttering and propping complete up to floor two level including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 21 | Providingandfixing 20mm( twenty millimetre)dia curtainrods of 1.25mmthickchromiumplatedbrassplate, withtwo chromiumplated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 22 | Providing and fixing 65x100mm ( sixty five into one hundred millimetre) factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & otherFrames/Chowkhat comprisingofvirginPVCpolymerofKvalue 58-60 ( fifty eight to sixty) (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 ( twelve)for 100 gms ( one hundred grams) fabricated with miter joints after applying PVCsolvent cement and screwed withfull body threaded starheaded SSscrews having minimum frame density of 750 kg/cum,( seven hundred fifty kilograme per cubic metre) screw withdrawal strength of 2200 ( two thousand two hundred )N (Face) & 1100( one thousand one hundred) N (Edge), minimum compressive strength of 58 ( fifty eight)N/mm², modulus of elasticity 900( nine hundred) N/mm² and resistance to spread of flame of ClassAcategorywithproperty ofbeing Termite/borerproof,water/moistureproof andFireretardantand fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately)including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 23 | 35 mm ( thirty five millimetre) thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (five millimetre)(± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, ( ninety five millimetre into thirty five millimetre into five millimetre) out of which 75 mm ( seventy five millimetre) shall be flat and 20 mm( twenty millimetre) shall be tapered (on both side), having one side thickness of 15 mm ( fifteen millimetre)integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, ( forty millimetre into twenty millimetre into one millimetre)joints of styles & rails to be mitered cut & joint withthehelpofPVCsolventcement, selfdrivenselftapping screws&M.S.rectangular pipesbracketofsize 190 mm X 100 mm ( one hundred ninety millimetre into one hundred millimetre) of cross section size 35 mm x 17 mm x 1 mm ( thirty five millimetre into seventeen millimetre into one millimetre) at each corner. Single piece extruded 5 mm ( five millimetre)thick solid PVC Lock rail of size 115 mm x 35 mm, out ( one hundred fifteen millimetre into thirty fivre millimetre )of which 75 mm ( seventy five millimetre)to be flat and 20 mm ( twenty millimetre ) to be tapered atbothends, having 15mm ( fifteen millimetre)solid core inmiddle ofrailsectionintegrally extruded,fixing thestyles &railswiththehelpof solvent and selfdriven selftappingscrewsof125mmx11mm, ( one hundred twenty five millimetre into eleven millimetre) includingproviding 5 mm ( five millimetre)Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. Non decorative finish (matt finish)including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 24 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners100x8mm ( one hundred into eight millimetre) sizefor fixingframe to shallbe mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware'sand drainageofwateretc. Afterfixing framethe gapbetweenframeandadjacentfinishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately).Casement door with 3D hinges made of (big series) frame 67 x 64 mm ( sixty seven into sixty four millimetre) & sash 67 x 110 mm ( sixty seven into sixty four millimetre) both having wall thickness of 2.3 ( two point three) ± 0.2 mm ( zero point two)and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm ( two square metre).including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 25 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60( one point six zero) ± 0.2 mm( zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3 (three)D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners100x8mm ( one hundred into eight millimetre) size for fixingframe to shallbe mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware'sand drainageofwateretc. Afterfixing framethe gapbetweenframeandadjacentfinishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately).Casement door with top hung ventilator with 3 ( three) D and S.S. friction hinges (400 x 19 x 1.9 mm)( four hundred into ninteen into one point nine millimetre) made of (big series) frame 67 x 64 mm ( sixty seven into sixty four millimetre), sash 67 x 110 mm ( sixty seven one hundred ten millimetre)& mullion 67 x 80 mm ( sixty seven into eighty millimetre) allhavingwallthicknessof 2.3 (two point three)±.0.2mm ( zero point two millimetre)and single glazingbead/double glazingbead including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 26 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer- in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panesof 5.00 mm ( five millimetre)thickness weight not less than 12.50 kg / sqm ( twelve point five zero kilogramme per square metre)including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 27 | Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling forpanelled and glazed shutters25mm ( twenty five ) to 40mm ( forty millimetre) thick:Pre- laminated with decorative lamination on both side exterior Grade - I (one) MDF Board 12 mm ( twelve) thick confirming to IS:14587 including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 28 | Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m ( one point five zero) In height dimension comprising of uPVC multi-chambered frameabove 1.50 m ( one point five zero) in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60( one point six zero ) ± 0.2 mm( zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriatedimensionof uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg ( one hundred twenty kilogramme), G.I fasteners 100 x 8 mm ( one hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cutandfusionweldedat allcorners, includingdrilling ofholesforfixing hardware'sand drainageof water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 29 | Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 30 | Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract |
| 31 | Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 32 | Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. completeincluding entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 33 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coatingnot less than grade AC 10 as per IS : 1868), transparent or dyed to required colour orshade, with nuts and screws etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 34 | 300×16mm (Three hundred into sixteen millimetre) nominal size |
| 35 | 250×16mm (Two hundred fifty into sixteen millimetre) nominal size |
| 36 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten)as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 37 | 250×10mm (Two hundred fifty into ten millimetre) nominal size |
| 38 | 150×10mm (one hundred fifty into ten millimetre) nominal size |
| 39 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not lessthan grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 40 | 125mm (one hundred twenty five millimetres) |
| 41 | 100 mm (one hundred millimetres) |
| 42 | 75 mm ( Seventy five millimetre) |
| 43 | Providing and fixing PTMT handles with necessary screws etc.complete.125x34x24 mm ( one hundred twenty five into thirty four into twenty four millimetre )weighing not less than 23 gms including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 44 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logowith ISi, IS:3564, embossed on thebody, door weight upto 36 kg( thirty six kilogramme ) to 80kg( eighty kilograme) and door widthfrom 701 mm ( seven hundred one ) to 1000 mm ( one thousand millimetre), with double speed adjustment with necessary accessories and screws etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 45 | Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC 10 (ten)as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 46 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 47 | Providing and fixing 19mm ( ninteen millimetre )thick HDHMR Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 48 | Providing and fixing 19mm( ninteen millimetre) thick water proof HDHMR board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 49 | Providing and fixing 1.00mm ( one millimetre)thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 50 | Providing and fixing 8mm (eight millimetre)thick water proof kit ply of standard quality ISI mark and approved shade and colour in wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 51 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.250 mm ( two hundred fifty millimetre)weighing not less than 150 gms ( one hundred fifty millimetre grams) including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 52 | Providing and fixing 50 mm ( fifty millimetre)special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 53 | Providing and fixing 50 mm ( fifty millimetre) bright finished brass cup board or wardrobe knob of approved quality with necessary screws including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 54 | Providing and fixing angle iron cupboard frames made of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog (Rajpura) manufactured from M.S.Angle iron section 25X25X5mm (Twenty five into Twenty five into five ) millimetres thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm (Twenty five into Twenty five ) millimetres welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (Two point five ) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface complete upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 55 | Providing and fixing 18mm (eighteen millimetres) thick granite of any colour gang saw cut,mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (Twenty millimetres) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc .complete at all levels including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 56 | Providing edge moulding to 18 mm (eighteen millimetres) thick marble work on counters, Vanities Kitcken top etc. including machine polishing to edge to give high gloss finish etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 57 | Providing and laying 10mm (ten) millimetres thick Full Body vitrified floor tiles of Size 600x600 mm(six hundred into six hundred)millimetres of approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08% and conforming to IS: 15622, of approved make, olours and shades, laid on 12mm (twelve) millimetres thick cement mortar 1:3 (one cement : three coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete including grouting the joints with white cement mixed with matching pigments etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 58 | Providing and laying Full Body vitrified floor tiles 600x600 mm(Six hundred into six hundred)millimetres of approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve) millimetres thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joint with white cement & matching pigments etc. complete in approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell/SIMPOLO/ NITCO/ SOMANY or its equivalent including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 59 | Providing and laying Full Body glazed antiskid vitrified floor tiles of Size 605x605 mm(six hundred five into six hundred five )millimetres of approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08% and conforming to IS: 15622, of approved make, olours and shades, laid on 20mm (twenty ) millimetres thick cement mortar 1:4 (one cement : four coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete including grouting the joints with white cement mixed with matching pigments etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 60 | Providing and laying Full Body glazed antiskid vitrified floor tiles of Size 605x605 mm(six hundred five into six hundred five )millimetres of approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve) millimetres thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joint with white cement & matching pigments etc. complete in approved shade including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 61 | Providing and laying 10(ten)millimetres thick of size 600x600x10(six hundred into six hundred into ten ) millimetre antistatic vitrified anti static conductive,abrasion make of H & R JONSHAN India/Orient/Rak/Kajaria/Nitco of approved make, colours and shades, laid on 20mm (twenty ) millimetres thick cement mortar 1:4 (one cement : four coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joint with white cement & matching pigments etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 62 | Providing and laying 10(ten)millimetres thick of size 600x600(six hundred into six hundred ) millimetre antistatic vitrified anti static conductive,abrasion make of H & R JONSHAN India/Orient/Rak/Kajaria/Nitco ofof approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve) millimetres thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joint with white cement & matching pigments etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 63 | Providing and laying Full Body anti skid vitrified floor tiles of Size 300x 300x 10 mm(Three hundred into three hundred into ten millimetre) of approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08% and conforming to IS: 15622, of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (twelve) millimetres thick cement mortar 1:3 (one cement : three coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 64 | Providing and laying Full Body anti skid vitrified floor tiles of Size 300x 300x 10 mm(Three hundred into three hundred into ten millimetre) of approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08% and conforming to IS: 15622, of approved shade in skirting, risers of steps and dados on 12mm (twelve) millimetres thick cement mortar 1:3 (one cement : three coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 65 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm ( three hundred into three hundred millimetre) (thickness to be specified by the manufacturer) made of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08% and conforming to IS: 15622, of approved shade in flooring, treads of steps and landing laid on a bed of 20mm (twenty) millimetres thick cement mortar 1:4 (one cement : three coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 66 | Providing and fixing 1st quality ceramic glazed floor tiles Size 300x600 mm ( three hundred into six hundred millimetre) conforming to IS :15622 (thickness to be specified by the manufacturer ) made of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08% and conforming to IS: 15622, of approved shade in in skirting, risers of steps and dados over 12 mm ( twelve millimetre) thick of cement mortar 1:3 (one cement : three coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 67 | Providing and laying exterior grade anti skid vetrified tiles (450x450mmx10mm) made of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08% and conforming to IS: 15622, of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement :3sand)laid jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 68 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm ( eighteen millimetre) thick stone slab over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shadeincluding rubbing, curing and polishing etc. all completeasspecified including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 69 | Providing and laying 18 mm ( eighteen millimetre) thick Polished finish Granite stone in Single piece riser of steps,dado required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings of approved shade over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 70 | Providing and laying cobble tiles of approved quality and shade in flooring 200x200x40mm ( two hundred into two hundred into forty millimetre)thick on 20mm (twenty millimetre) average thick base of cement mortar 1:4 (one cement : four sand) laid over and jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 71 | Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet made of TATA,Durashine in roofing with hot dipped matallic Zinc coated sheet with the top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns 5 (five) micron over five micron's primer coating to back coat of polyster over 5 (five) microns primar coating including fixing with pre painted iron J or L hooks, bolts and nuts 6mm (six milimeters) dia meter with prepainted limpet and rubber washer complete with all accessories as equired as per the direction of Engineer-in Charge upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 72 | Providing and fixing ridges or hips 60cm (Sixty centimetres) overall with 0.60mm) Zero point six zero millimetres) thick prepainted steel sheets made of TATA/DUROSTONE Make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 73 | Providing and fixing valleys 90cm (Ninety centimetres) (overall 0.60mm (Zero point six zero millimetres) thick prepainted steel sheet TATA/JINDAL Make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (Six millimetres) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required in all heights upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 74 | Providing and fixing 15cm ( Fifteen centimetres)_ wide, 45 cm (forty five centimetres) overall semi-circular plain G.S. sheet gutter TATA/ SAIL/ TISCO with iron brackets 40x3mm (forty into three millimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 75 | Providing and fixing M.S. BP Sheet of Tata, Sail, 1.66 mm (One point sixty six millimeters) to 2mm (Two millimeters) thick in eves board/ facia/soffit/ceiling including cutting ,fixing and welding to steel roof members and applying a coat of red lead primer complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 76 | Structural steel work riveted, bolted or welded in builtup sections,, made of TATA, JINDAL, trusses and trussed, in purlins in building framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 77 | Steel work welded in built up sections,, made of TATA, SAIL,in trusses and framed work including cutting hoisting, fixing in position using structural steel etc. as required in Grating frames, guard bar, ladder railing, brackets, gates and similar work. and applying a priming coat of approved steel primer all complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 78 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 79 | Providing and fixing single socketed pipe 75 mm ( seventy five millimetre) on wall face unplasticised Rigid PVC rain water pipes Finolex make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion, diameter complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 80 | Providing and fixing single socketed pipe 110 mm ( one hundred ten millimetre) on wall face unplasticised Rigid PVC rain water pipes Finolex make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion, diameter complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 81 | Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre ) gap for thermal expansion.complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 82 | Coupler 110 mm ( one hundred ten millimetre) |
| 83 | Single Pushfit Coupler 110 mm ( one hundred ten millimetre) |
| 84 | Bend 110 mm ( one hundred ten millimetre) |
| 85 | Providing and fixing MS railing for stair case having balluster of 19mm x19mm ( ninteen into ninteen millimetres) M.S. solid square bar with a clear height of 85cm (eighty five centimetres) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm ( forty into six millimetres) size complete with a applying priming coat of red lead paint as per drawing specification upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 86 | Providing and fixing 60 mm x 75mm (sixty millimetre into seventy five millimetre) hand rails in 1st class Indian teak wood straight length including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract.. |
| 87 | Providing and fixing M.S. fan clamp type I or II of 16 mm ( One or two of sixteen) millimetres dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 88 | 15mm (fifteen millimeters) cement plaster in single coat on the rough side of brick/ concrete/ stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 89 | 6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one Cement : three Sand) including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 90 | Extra for plastering done on moulding, cornices orarchitraves including neat finishto lineand level:Inone coat including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 91 | Providing and applying white cement based putty of average thickness 1 mm (one millimeters) of approved brand Birla white, Putty/ J.K. wall puttyand manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.after thoroughly brushing the surface free from mortar droops, dust, loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 92 | Finishing walls with Two or more coat applied @ 3.84 Kg/10 sqm (three point eight four kilograme per ten square metre) with water proofing cement paint of required shade preparation of surface, etc. complete on undecorated wall surface to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth complete upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 93 | Wall painting (two coats) with acrylic emulsion paint of Nerolac, Burger, (Bison Acrylic) Asian paints,(Tractor, Acrylic) and Shalimar of approved brand and manufacture having VOC (Volatile Organic Compound ) content less than 50 (fifty) grams per litre for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 94 | Distempering (two or more coats) with over and including water thick made priming coat with cement primer with acrylic washable distemper of approved brand Nerolac , Berger (Bison Acrylic) Asian Paints (Tractor, Acrylic), Shalimar of approved manufacturer, of required shade and colour complete, on new concrete /masonry/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering the surface smooth complete as required upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 95 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine zero liters per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five liters per ten square metre) of approved brand and manufacture of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make including cleaning of all dirt, dust and other foreign matter sand papering and stopping complete upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 96 | Painting two or more coats (excluding priming coat) on new steel and other metal surface with Deluxe Multi Surface Paint to give an even shade applied @ 0.90 ltr/ 10 sqm (zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight zero litre per ten square metre) of approved brand and manufacture paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter of ( ASAIN/NEROLAC/ICI-DULUX ) make pto all floor levels complete as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 97 | Providing and fixing 1st quality GRC/Unistone wall cladding conforming to IS:15622 (thickness to be specified by the manufacture) of approved make in all colours shades except burgundy, bottle green black of any size as approved by Engineer-in-charge. In skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (one cement : three sand)and jointing with grey cement slurry @ 3.3 kg per sqm. including pointing in white cement mixed with pigment of matching shade complete upto all floor level including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 98 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: b)laying second layer of Fibre glass clothwhen the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm.( ten centimetre) third layer of 1.5 mm ( one point five millimetre) thickness consisting of slurry [email protected]/sqm ( one point two eight nine per squremetre) mixedwith waterproofing cementcompound @0.670kg/sqm ( zero point six seven zero kilograme per square metre)and coarsesand @ 1.289 kg/sqm ( one point two eight nine per squremetre) . This will be allowed to air cure for 4(four) hours followed by water curing for 48 (forty eight) hours. The entire treatmentwill be taken upto30cmonparapet walland tucked into groovein parapetall around. d) fourth and final layer of brick tiling with cement mortar (which will be paidfor separately. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 99 | Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm ( Six hundred into six hundred millimetre) module which includes providing and fixing 'C' wall angle of size 20x30x20 mm ( twenty into thirty into twenty millimetre) made of 0.5 mm ( zero point five millimetre) thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm ( three hundred millimetre)center to centre, suspending the main C carrier of size 10x38x10 mm (ten into thirty eight into ten millimetre)made of G.I steel 0.7 mm ( zero point seven millimetre) thick from the soffit with help of soffit cleat 37x27x25x1.6 mm (thirty seven into twenty seven into twenty five into one point six millimetre), rawl plugs of size 38x12 mm ( thirty eight into twelve millimetre)and C carrier suspension clip and main carrier bracket at 1000 mm c/c( one thousand millimetre centre to center). Inverted triangle shaped Spring Tee having height of 24 mm( twenty four millimetre) and width of 34 mm (thirty four millimetre)made of Gl steel 0.45 mm ( zero point four five millimetre)thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm (six hundred millimetre) centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/ sqm ( one hundred twenty grams per square Metre) (both side inclusive), fixing with clip in tiles into spring T with :GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 ( six hundred into six hundred)and 0.5 mm ( zero point five millimetre)thick with 25 mm (twenty five millimetre)height, made of G I sheet having galvanizing of 100 gms/ sqm( one hundred grams per square Metre) (both sides inclusive) and electro statically polyester powder coated of thickness 60 ( sixty) microns (minimum), including factory painted after bending including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 100 | Providing and fixing 3mm (three millimetre) thick ACP Sheet approved shade and Over GI frame work fixing with scews Complete with Engineer in-charge (frame work to be measured seprately) including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 101 | Providing and laying cobble tiles 40 mm ( forty millimetre) thick in footpath,Ramp & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles,including rubbing and cleaning etc. complete, on 20 mm ( twenty millimetre) thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 102 | Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm (fifteen into twenty two centimeter) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:three Sand) including earth work and laying 10 cm (ten centimeter) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm(forty millimeter) nominal size and 7.5 cm (seven point five centimeter) cement concrete 1:2:4 (one Cement : two Sand : four graded stone aggregate of 20 mm (twenty millimeter)nominal size) and finished with a floating coat of neat cement complete as per standard design including providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25 (M-twenty five), of size 1000 x 450x50 mm (one thousand into four hundred fifty into fifty millimeter), reinforced with 8 mm(eight millimeter) dia four nos longitudinal & 9 nos (nine numbers) cross sectional T.M.T. hoop bars, including providing 50 mm (fifty millimeter) dia perforations @ 100 to 125 mm c/c, at the rate one hundred to one hundred twenty five millimeter centre to centre ) including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 103 | Providing and fixing water closet squatting pan of size 520x385x390 mm ( five hundred twenty into three hundred eighty five millimetre) with integral conventional WC No. 2008 with 100 mm( one hundred millimetre) sand cast Iron P or S trap, 10 (ten)litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 104 | Providing and fixing water closet squatting pan Anglo Indian WC Pan no. 2061 with 100 mm ( one hundred millimetre) sand cast Iron P or S trap, 10 (ten)litre low level white P.V.C. flushing cistern, including flushpipe,withmanuallycontrolled device(handlelever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: complete in all respect including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 105 | Providing and fixing Charlote 1075 wash basin with C.I. brackets, 15mm ( fifteen millimetre)C.P. brass pillar taps,32mm ( thirty two millimetre) C.P.brasswasteof standard pattern, includingpainting of fitting and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 650x570 mm( six hundred fifty into five hundred seventy millimetre) with 1175 half pedestal of a pair of 15 mm ( fifteen millimetre) C.P. brass pillar taps including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 106 | Providing and fixing wash basin of JAQUAR/HINDWARE/CASCADE NXT C0404 with half pedestal in white shade with C.I. brackets, 15 mm (fifteen millimeters) C.P. brass pillar taps, 32 mm (Thirty two millimeters) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 107 | Providing and fixing One urinal basin with 5(five) litre white P.V.C. automatic flushing cistern white vitreous china flat back or wall corner type lipped front urinal basin no. 5001 with automatic flushing cistern with standard flush pipe and C.P. Brass spreaders with brass unions and G.I clamps complete, including painting offittings and brackets,cutting andmakinggood thewallsandfloors including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 108 | Providing nad fixing Division plate for urinals 600mmx300mm ( six hundred into three hundred millimetre) viterious china Cera/Jaquar/ Hindware/Parryware make complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 109 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 110 | Providing and fixing Stainless Steel A ISI 304 (18/8) (eighteen/ eight) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimeters) including painting of fittings and brackets, cutting and making good the walls wherever required : Sink No. REK 1916 of overall size 480x405mm (four hundred eighty into four hundred five millimeters) of Diamond sinks including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 111 | Providing and fixing 8 mm(eight millimeters) dia C.P. / S.S. Jet with flexible tube upto 1(one ) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 112 | Providing and fixing 32 mm (thirty two millimeters) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 113 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimeters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 114 | Providing and fixing 600x120x5mm(six hundred into one hundred twenty into five millimeters) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimeters) long screws, rawl plugs etc., complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 115 | Providing and fixing toilet paper holder C P Brass Paper holder with flap recessed type No. 1553 of Hotelier Series of JAQUAR or ESS - ESS including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 116 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes of Finolex make or equivelent ISI marked working pressure not less than 4.5(four point five)kilogram per square centimeter including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 117 | 110 mm ( One hundre ten millimetre) dia |
| 118 | 75 mm ( Seventyfive millimetre) dia |
| 119 | Providing and fixing PVC clamps ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 120 | 110mm (one hundred ten millimetre) dia |
| 121 | 75 mm ( seventy five millimetre) dia |
| 122 | Providing and fixing PVC single equal branch with oval access door, ISI marked of Finolex or equivelent make insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 123 | 110mm (one hundred ten millimetre) dia |
| 124 | 75 mm ( seventy five millimetre) dia |
| 125 | Providing and fixing PVC Double equal branch with oval access door, ISI marked of Finolex or equivelent make insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 126 | 110 mm (one hundred ten millimeters) dia. |
| 127 | 75 mm (seventy five millimeters) dia. |
| 128 | Providing and fixing PVC door bend with oval access door insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts ISI marked of Finolex or equivelent make complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 129 | 110 mm (one hundred ten millimeters) dia. |
| 130 | 75 mm (seventy five millimeters) dia. |
| 131 | Providing and fixing PVC collar ISI marked of Finolex make including fixing with approved adhesive etc.complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 132 | 110mm (one hundred ten millimetre) dia |
| 133 | 75 mm ( seventy five millimetre) dia |
| 134 | Providing and fixing CP brass single lever telephonic wall mixer of quality and make as approved by Engineer in charge including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 135 | Providing and fixing 110 mm X 90 mm (one hundred ten into ninety millimeters) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 136 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden plugs with CP brass screws 750 x 20mm (Seven hundred fifty into twenty millimeters) of Kingstone, Gem, Parko, Techno, Jal, ESS, Seiko, Modi ,JAQUAR make including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 137 | Providing and fixing pipe Polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 138 | 1216 ( one thousand two hundred sixteen) 16 (Sixteen millimetres) outer dia |
| 139 | 1620 ( one thousand six hundred twenty) 20 (twenty millimetres) outer dia |
| 140 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. of B.S.T/ JINDAL(HISAR)/ TATA STEEL TUBE LTD /PRAKASH SURYA tube upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 141 | 15 mm (Fifteen millimetres) nominal bore |
| 142 | 20 mm (twenty millimetres) nominal bore |
| 143 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm (twenty five into forty millimeters) nominal bore including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 144 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter to be paid separately) including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 145 | Providing and fixing 15mm (fifteen millimeters) nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 146 | 20 mm (twenty millimetres) nominal bore |
| 147 | 25mm (twenty five millimetres) nominal bore |
| 148 | Providing and fixing unplasticised PVC connection pipe with brass unions : 45cm (forty five centimeters) length 15mm (fifteen millimeters) nominal bore including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 149 | Providing and fixing CP Brass shower rose with 15mm to 20mm (fifteen to twenty millimetres inlet of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 150 | Providing and fixing G.I./ M.I. Union of unik,KS,AMCO,AVR,NVR,RR,SUW make including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 151 | 15 mm (fifteen) millimetres dia |
| 152 | 20 mm (Twenty) millimetres dia |
| 153 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, having capacity of 1000(One thousand) litres with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank in all respect including hoisting upto all floor level above ground level including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 154 | Providing and fixing C.P. brass bib cock of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of approved quality conforming to IS 8931. 15 mm (fifteen millimetres) nominal bore upto all floor levels in all heights/ depth including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 155 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms(six hundred ninety grammes) 15 mm (fifteen millimeters) nominal bore including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 156 | Providing and fixing CP Brass stop cock 15mm (Fifteen millimetres) dia of Jaquar JAL, ESS ESS. Kingstone,Gem,Parko,Techno,Seiko including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 157 | Providing and fixing C.P. brass soap Dish Holder having length of 138mm ( one hundred thirty eight millimetre), breadth 102mm ( one hundred two millimetre), height of 75mm( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms (one hundred six grams). including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 158 | Providing and laying RCC pipes. Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 159 | 300 mm (three hundred millimetre)dia |
| 160 | 600 mm (six hundred millimetre)dia |
| 161 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix ( one cement : one point five coarse sand : three graded stone aggregate twenty millimetrenominalsize),foundationconcrete1:4:8 mix( one cement: four coarse sand: eight graded stone aggregate 40 mm (Forty millimetre) ( one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 20 mm ( Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Insidesize 90x80cm ( Ninety into eighty centimetre)and45 cm ( Forty five centimetre)deep including C.I.cover with frame(light duty)455x610 ( Four hundred fifty five into six hundred ten) mminternaldimensions,totalweightofcover and frametobenotlessthan38 kg ( Thirty eight kilograme)(weight of cover 23 kg ( Twenty three kilograme) and weight of frame 15 kg ( Fifteen kilograme)) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 162 | Constructing masonry Chamber 30x30x50 cm ( thirty into thirty into fifty centimetre) inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm ( one hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (One cement : two coarse sand : four graded stone aggregate twenty millimetre nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate forty millimetre) nominal size ) and inside plastering with cement mortar 1:3 ( one cement : three coarse sand) 12mm(Twelve millimetre) thick,finished with a floating coat of With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 163 | Providing and fixing in position pre-cast RCC Manhole cover and frame of required shade and approved quality circular shape 450 mm ( four hundred fifty millimetre) internal dia metre including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. |
| 164 | Providing and fixing 110 mm (one hundred ten millimeters) dia. PVC Cowl ISI marked of Finolex or equivelent make including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender