Tender For annual repair & maintenance of Rest House At Bahli Under Hppwd Sub Division Taklech (Sh:- Painting, Flooring, Paneling, Interlocking Paver Blocks, Supply Of Furnitures, Sanitary Installations And Other Minor Works)
Tender Value
14.16 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
4 days left
EMD
28000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Rest House At Bahli Under Hppwd Sub Division Taklech (Sh:- Painting, Flooring, Paneling, Interlocking Paver Blocks, Supply Of Furnitures, Sanitary Installations And Other Minor Works)
BOQ
| Sl. No. | Item Description |
| 1 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work as directed by Engineer-in- Charge: |
| 2 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade old work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge |
| 3 | Painting two coats (excluding priming coat) on old steel and other metal surafce under coat with readymixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with readymixed paint other than white as per HPPWD specification of 1990 volume-1 including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge. |
| 4 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge. |
| 5 | Polishing two coats with french polish on wood and wood based surface to give an even surface with enamel paint of approved design or its equivalent on undecorated wall surface to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with paint complete as per HPPWD specification of 1990 volume-1 including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge. |
| 6 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge |
| 7 | Providing wood work in frame of false ceiling, partitions etc,sawnand fixed in position with necessary stainless steel screws etc.. With Ist class deodar wood all complete as per direction of Engineer-in-Charge. |
| 8 | Providing and fixing standard quality hard board sheet lining with butt jointing and nails (frame work and cover fillets to be measured an paid for separately) 12mm thick |
| 9 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 10 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size) |
| 11 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm as directed by Engineer-in- Charge: |
| 12 | 15mm thick cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering up to floor all level including arises internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth: in cm 1:6 through all modes of transportation with in all leads and lifts ,as per PWD specification and as per diresctio of the Engineer-in- Charge |
| 13 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board. 510x1040 mm bowl depth 250 mm. |
| 14 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 15 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 16 | Providing and Supplying of 9701 Sofa Set 5 Seater superior quality incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 17 | Providing and Supplying of 110-Marya Sofa Set Cover superior quality incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge |
| 18 | Providing and Supplying of HW-410 Chair 802 superior quality incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 19 | Providing and Supplying of UTSAV Comfort Classic Mattress 72X70X4.5 superior quality incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 20 | Providing and Supplying of 550- Checkers Curtain 7 X 4 of superior fabric incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender