Tender For Construction Of Nagrewadi Gcnb 07 Tq.Shirur Kasar.Dist. Beed
Tender Value
55.57 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
8 days left
EMD
55570
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Beed → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Nagrewadi Gcnb 07 Tq.Shirur Kasar.Dist. Beed
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1:- Clearing the site |
| 2 | Item No.2:- Excavation in all kindsof soil,soft murum,Hard murum and soft rock including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with all lead and lifts as directed by Engineering Incharge. |
| 3 | Item No.3 :- Excavation in Hard murum including boulder dressing the sides of trench and stacking material neatly with all leads and lifts etc.complete as directed. |
| 4 | Item No.4 :- Excavation in Soft Rock with out blasting including dressing the sides of trench and stacking material neatly with all leads and lifts etc.complete. |
| 5 | Item No.5:- Excavation in hard rock of all toughness by blasting including boulders above0.6 m dia.(0.113Cum) minimizing damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling/pre-splitting /smooth blasting techniques and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour, leveling bed etc., complete with all lead and lifts as directed by Engineering Incharge. |
| 6 | Item No.6:- Providing and fixing in position TMT -FE-500 bar reinforcement of various dia. For R.C.C. Pile caps,footing,foundation,slabs,beams,columns,canopis, staircase,newels,chajjs,lintels pardis,coping,fins,arches etc.as per detais designs,drawing & schedules including cutting,bending,hooking the bars binding with wires or tacks welding & supirected.porting as required complete as directed. |
| 7 | ITEM NO. 7:- Providing and laying in situ cement concrete of grade M-15(40 MSA) of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Batching Plant and concrete mixer with shuttering and scaffolding, placing, compacting, curing with all lead and lifts as directed by Engineering Incharge. |
| 8 | Item No.8:- Providing and fixing Sill beam with 150 x 100 x8 mm thick as per detail design drawing including one coat of anticorrosice paint with two coat of paint etc complete as directed by Engineering incharge. |
| 9 | Item No.10:- Providing and fixing steel vertical Channel with 150 x 100 x8 mm thick suitable to fit the Needle with all lead and lift as directed by Engineering incharge |
| 10 | Item No. 9:- Manufacturing with QAP & febrication of K.T. weir Needle gate straight type size 2.15 x0.5m-94 kg weight with all mateial, mild steel confirming to IS 2062 rubber seal, welding joint. It include all material, labour charges, Machinary charges, 1 km lead charge of transportation loading and unloading charges of Gate part at site, quality control charges sand blasitn, painting with one coat of zinc rich primer, two coat of sloventless tar epoxy paint etc. complete. |
| 11 | ITEM NO. 10:- Back filling up to ground level behind the canal structures etc. complete with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete as directed by Engineering incharge. |
| 12 | Item No.11:-Providing and fixing canal informatory sign board 1.20 x 0.75 m preparing on 16 mm gauge MS sheet with angle iron frame etc completed as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender