Tender For Repair & Rewinding Of Submersible Pumpset And Centrifugal Motor Pump Set Under Sub Div. Lalsot (Rural Scheme)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
8 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dausa → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Rewinding Of Submersible Pumpset And Centrifugal Motor Pump Set Under Sub Div. Lalsot (Rural Scheme)
BOQ
| Sl. No. | Item Description |
| 1 | Repair Rewinding of Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer's specification and to the satisfaction of Engineer Incharge. It includes the replacement of minor parts such as bushes (oil seal bush) Nut Bolts, washers, cable seal, gland ring, vent plug, water drain plug, etc. complete job |
| 2 | Above 3HP to 5 HP V-6 |
| 3 | Above 5HP to 7.5 HP V-6 |
| 4 | Above 7-5 HP to 10 HP V-6 |
| 5 | Above 10 HP to 12.5 HP , V-6 |
| 6 | Motor opening cable jointing & refitting charges when rewinding is not required. V-6 |
| 7 | Providing & Replacement of G.M./S.S. Bushes for all types of motors (per set of 4Nos.) including cost of sleeves V-6 |
| 8 | Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing. V-6 |
| 9 | Replacement of thrust plate for all types of motors V-6 |
| 10 | PART (B): SCHEDULE OF SPARES & REPAIR OF SUBMERSIBLE PUMP : |
| 11 | Supply and fixing spare parts for repair of pump set including cost of opening refitting, servicing, and machining, if required. It also includes the cost of nut bolt, studs, washer packing, keys etc. complete. |
| 12 | Providing & fixing of GM neck rings parts on impeller. |
| 13 | Plain Type V-6 |
| 14 | Bowel typeV-6 |
| 15 | Providing & Fixing of GM/SS bush per piece |
| 16 | Plain Type V-6 |
| 17 | Bowel typeV-6 |
| 18 | Providing & replacement of G.M. Impeller |
| 19 | Plain Type V-6 |
| 20 | Bowel typeV-6 |
| 21 | Providing & replacement of Nylon Impeller |
| 22 | Plain Type V-6 |
| 23 | Bowel typeV-6 |
| 24 | Providing & fixing Nylon Diffuser/ guide vans per piece V-6 |
| 25 | Providing & fixing Microlone Guide per piece V-6 |
| 26 | Pump opening & fixing including machining & all finishing work for desired performance |
| 27 | Plain Type V-6 |
| 28 | Bowel typeV-6 |
| 29 | Monoblock Pump Set |
| 30 | Rewinding of three phase squirrel cage induction motor of Monoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge. 15.00 HP |
| 31 | SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK PUMPSET (MOTOR + PUMP) |
| 32 | Connection Plates 10 HP to 20 HP |
| 33 | Cooling Fan 10 HP to 20 HP |
| 34 | GM/SS bush 10 HP to 20 HP |
| 35 | Mechanical reconditioning of Bearing sheet 10 HP to 20 HP |
| 36 | Mechanical reconditioning ofImpeller sheet and Key way slot 10 HP to 20 HP |
| 37 | Oil seal 10 HP to 20 HP |
| 38 | Labour charge for opening and fitting of pump sets 10 HP to 20 HP |
| 39 | Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (excluding cost of copper wire) 'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump sets and transportation to and fro from installation site complete as per direction of engineer in charge at site. |
| 40 | Above 25.00 HP but upto 30.00 HP |
| 41 | Above 45.00 HP but upto 50.00 HP |
| 42 | SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP) |
| 43 | Connection Plates |
| 44 | 20 HP to 30 HP |
| 45 | 30 HP to 50 HP |
| 46 | Cooling Fan |
| 47 | 20 HP to 30 HP |
| 48 | 30 HP to 50 HP |
| 49 | Fan Cover |
| 50 | 20 HP to 30 HP |
| 51 | 30 HP to 50 HP |
| 52 | G.M./SS Gland Guide Bush |
| 53 | 20 HP to 30 HP |
| 54 | 30 HP to 50 HP |
| 55 | Shaft with Sleeve Chuck Nut |
| 56 | 20 HP to 30 HP |
| 57 | 30 HP to 50 HP |
| 58 | Shaft Chuck Nut |
| 59 | 20 HP to 30 HP |
| 60 | 30 HP to 50 HP |
| 61 | G.M. Neck Ring |
| 62 | 20 HP to 30 HP |
| 63 | 30 HP to 50 HP |
| 64 | Bush Shaft Sleeve of G.M. |
| 65 | 20 HP to 30 HP |
| 66 | 30 HP to 50 HP |
| 67 | G.M. Gland Cover |
| 68 | 20 HP to 30 HP |
| 69 | 30 HP to 50 HP |
| 70 | S.S. Shaft (Non Magnetic) |
| 71 | 20 HP to 30 HP |
| 72 | 30 HP to 50 HP |
| 73 | G.M. Shaft Sleeve Check Nut |
| 74 | 20 HP to 30 HP |
| 75 | 30 HP to 50 HP |
| 76 | M.S. Shaft Check Nut |
| 77 | 20 HP to 30 HP |
| 78 | 30 HP to 50 HP |
| 79 | Cooling pipe set with nozzle & Nut |
| 80 | 20 HP to 30 HP |
| 81 | 30 HP to 50 HP |
| 82 | AIR Cock |
| 83 | 20 HP to 30 HP |
| 84 | 30 HP to 50 HP |
| 85 | JOB WORK FOR REPAIR OF PUMP MOTOR |
| 86 | Bearing Housing (rebuilding, turning & finishing) |
| 87 | 20 HP to 30 HP |
| 88 | 30 HP to 50 HP |
| 89 | Bearing Cap (rebuilding, turning & finishing) |
| 90 | 20 HP to 30 HP |
| 91 | 30 HP to 50 HP |
| 92 | Impeller Reconditioning for all type of Pump |
| 93 | 20 HP to 30 HP |
| 94 | 30 HP to 50 HP |
| 95 | Labour Charges for Dismantling & Assembling of Pump |
| 96 | 20 HP to 30 HP |
| 97 | 30 HP to 50 HP |
| 98 | Coupling with stud and rubber bush |
| 99 | 20 HP to 30 HP |
| 100 | 30 HP to 50 HP |
| 101 | Supply & Fixing of tyre coupling sets according to relevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge.Type 14 Nos. set |
| 102 | Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC. |
| 103 | 6306 or equivalent size |
| 104 | 6307 or equivalent size |
| 105 | 6308 or equivalent size |
| 106 | 6309 or equivalent size |
| 107 | 6310 or equivalent size |
| 108 | 6311 or equivalent size |
| 109 | Routine maintenance of centrifugal coupled pump and motor including opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes & coupling nut & bolts for coupling pulley, tightening all nut & bolts of foundation, baseplate, pump & motor etc. Checking & correcting alignment of pump & motor including necessary materials i.e. grease, nut & bolts, studs, washers, gland packing and rubber bushes etc. work done at site complete job |
| 110 | 20 HP to 30 HP |
| 111 | Above 30 HP and up to 50 HP |
| 112 | Cleaning of pump house by air blower/ vacuum cleaner or other means including removing of JALA from ceiling and walls etc. complete Job. |
| 113 | Cleaning of Electric Panel PMCC by air blower/vacuum cleaner or other means including tightening of loose connections etc. complete job. |
| 114 | Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut&bolts etc. complete job. |
| 115 | Above 20 HP and up to 30 HP |
| 116 | Above 30 HP and up to 50 HP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender