Supply Of OFFICE FURNITURE

Sharing tender

Supply Of office furniture , ss luggage rack; ss rack with 1inch square tube, 7x2x5 (length x width x height) feet, 03 selves of ss material with 1 inch square tube support to carry weight, (distance between 2 shelves 2 feet). [ warranty period: 30 months after the date of delivery ] ] , dining table plastic: nilkamal or similar ] , writing table; ms 1 inch square tube frame with powder coating, size:34?h x 18?w x 28?l in ches, pre-laminated plywood board fixed on top (30 x 20 inches) bottom of the frame supported with same square tube in ?i? shape. [ warranty period: 30 months after the date of delivery ] ] , three seater(03) stainless steel chair: with cushion seat, back & arm. 1.seat/back assembl y: the seat should be made up of 1.2 mm. thick hot-pressed plywood and upholstered with fabric or synthe tic leather and molded polyurethane foam. the back should be made up 1.2 mm. thick hot-pressed plywoo d upholstered with replaceable fabric or synthetic leather upholstery covers and molded polyurethane foa m. the back ply and foam should be designed with contoured lumber support for comfortable seating postu re. mid back, size 48.0cm.(w) x 64.5cm.(h). seat size 51cm.(w) x 48cm.(d) 2.high resilience (hr) po lyurethane foam: for seat and back should be molded with density = 45 kg/cu mtr, thickness 40 mm. 3. armrest: armrest top should be made of molded polyurethane (p.u) and mounted on to a fixed type m.s. t ubular armrest support which should be chrome plated. 4. fixed backrest: the backrest cons should be o f a fixed type mechanism i.e. no back up/down adjustment. 5. leg frame assembly: the leg frame welde d assembly should be chrome plated. [ warranty period: 30 months after the date of delivery ] ] , chairs plastic nilkamal or similar ] , office tables (1350 x 750 x 20mm) is 8126 specifies, table top materials: medium density fi breboard (mdf) or plywood. mild steel tubular/square pipe thickness not less than (1.2) mm, with a wall thi ckness not less than (1.6) mm. storage units: include 03 drawers? right side, and a filing unit left side with one shelf. handles: drawers and locker doors must have a corrosion-resistant metal handle or a built-in pull mechanism. locks, storage units: drawer and locker locks must conform to is 729: 1979, and be at least a six-lever lock with non-corrosive duplicate keys. studs: studs for tubular pedestals must be made of rubber or suitable plastic. [ warranty period: 30 months after the date of delivery ] ] , study table plastic: nilkamal or similar ] , supervisor chairs, with synchronic tilt mechanism, 360 degree-revolving type and upright lo cking, pneumatic height adjustments, with adjustable arm rest, push back rest with external lumbar supp ort with inner frame upholstered with mesh fabric and mounted on main assembly, separate adjustable he adrest, seat with upright locking and pressed & moulded with pu foam 50 kg/cu mtr with 40mm thickness, chrome plated ms pedestal base, 5 nos nylon twin wheel castor. [ warranty period: 30 months after the date of delivery ] ] , rack for walkie /talkie charging: supply and installation of cabinet of 54(9x6) pigeon holes ( 8 width x 8 height) overall size: 75 length x 48+6 height x 9 width, electrical wiring with 3 pin sockets in all the pigeon holes and control switches on top, with 1 main circuit breaker, material: 1 mm powder coat ed ms sheet, bullet legs and bush at the bottom. [ warranty period: 30 months after the date of delivery ] ] , ms 4 drawers file cabinet: ms material with 1.2 mm thickness powder coated, size 1369h x 675l x 475w, including pedestal [ warranty period: 30 months after the date of delivery ] ] , visitor/staff chairs:cantilever round tubular under structure, seat with moulded pu foam den city35 kg/cu mtr, 40 mm thickness, with polyster fabric upholstery, backrest: moulded plastic mesh fabric, with continuous arm rest (ms crome plated). [ warranty period: 30 months after the date of delivery ] ]