Tender For Minor Maintenance Of 07(Seven) Nos. Li/Dtw Schemes Namely Dtw Scheme At Anandanagar, Dtw Scheme At Ballavpur, L.I. Scheme At Muchraipara, L . I . Scheme At Dhanraipara, L . I . Scheme At Bikramnagar - I, L . I . Scheme At Kanchanmala (West ), D
Tender Value
6.03 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
12061
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Minor Maintenance Of 07(Seven) Nos. Li/Dtw Schemes Namely Dtw Scheme At Anandanagar, Dtw Scheme At Ballavpur, L.I. Scheme At Muchraipara, L . I . Scheme At Dhanraipara, L . I . Scheme At Bikramnagar - I, L . I . Scheme At Kanchanmala (West ), Dtw Scheme At Madhabpur /Sh: Restoration And Replacement Of Old Pump Set, Maintenance Of Mi Schemes Under Dukli Rd During The Year 2026-27. Dniet No:- 18/Ee/Wrd-Ii /2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Dismentling of pump for over hauling including greasing, gland packing necessary repairs & reinstallation of the same including trial run for 10 hrs, in two spell complete as per direction of the Engineer- In- Charge. |
| 2 | Dismentling of horizontal pump and motor of 20/25 HP from the base and carriage the pump set to the nearest workshop for repairing the body thread of stag nut and carrying the same to the scheme and fitting fixing the pump set as before as per direction of Engineer-in-Charge. |
| 3 | Supplying & fitting fixing of asbestos rope of best quality as per direction of Engineer-In-Charge.6 to 8 mm thick |
| 4 | Supplying & greasing/ applying of grease of approved quality as per direction of Engineer-In-Charge. |
| 5 | Supplying and fitting fixing pump cooling pipe of best quality as per direction of Engineer-In-Charge. |
| 6 | Providing & fitting fixing CI coupling complete with nuts & bolts of approved quality. 150 mm dia. |
| 7 | Providing & fitting fixing copuling nuts and bolts (all size) of approved quality. |
| 8 | Providing & fitting fixing of coupling rubber bush (all size) of approved quality. |
| 9 | Providing & fitting fixing coupling star bush all size of approved quality. |
| 10 | Providing & fitting fixing pump shaft of approved quality. |
| 11 | Providing & fitting fixing of shaft sleeve bush of approved quality Cast Iron. |
| 12 | Providing & fitting fixing of shaft sleeve nuts of approved quality Cast Iron. |
| 13 | Providing & fitting fixing coupling/ impeller Key of approved quality.Stainless Steel |
| 14 | Providing & fitting fixing casing ring of approved quality. 150 mm dia 8mm thick |
| 15 | Providing & fitting fixing C.I Gland of approved quality. |
| 16 | Providing & fitting fixing C.I Gland nut/ stag nut 100 mm long for gland of approved quality. |
| 17 | Providing and fitting fixing lantern ring for pump of approved quality. |
| 18 | Supply & Fitting fixing ball bearing of approved quality for pump required during overhauling.(i) 6305 Ball bearing (TATA /SKF) |
| 19 | (ii) 6306 Ball bearing (TATA /SKF) |
| 20 | (iii) 6309 Ball bearing (TATA /SKF) |
| 21 | (iv) 6310 Ball bearing (TATA /SKF) |
| 22 | Dismentaling of old pump/motor from base & stacking of materials & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge. |
| 23 | Providing and Installation of Horizontal pump motor set (Centrifugal) with allied equipments by maintaining proper level/slope, alignment etc. in/c all necessary nuts & bolts, washers etc. at site of work and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run for 10hrs. in two spell as per direction of the Engineer-in-charge.i) 25 HP mortar with 60 LPS 22 m head pump |
| 24 | Supplying & fitting fixing manually operated oil immerged starter of approved quality.30HP Osco/BCH Make |
| 25 | Supplying & filling of Transformer Oil in the oil tank of manually operated oil immerged starter of approved quality. |
| 26 | Supplying & fitting fixing power capacitor (ISI Marked) of approved quality.12.5 KVAr power capacitor |
| 27 | Supplying & fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality.7/16 Copper Wire |
| 28 | Supplying and fitting fixing of selector switch on the panel board of approved quality. |
| 29 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:-Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 30 | Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design. |
| 31 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded well burnt brick aggregate 20 mm nominal size) |
| 32 | Excavation trenches of required width for pipes, cables etc. including excavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm (slope- 1 in 200) including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in deoth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter-2 of CPWD specification and direction of the Engineer-in-charge. B. For G.I./C.I./D.I. pipes in new worka. In all kinds of soilii. For pipes exceeding 90 mm dia but not exceeding 300 mm dia |
| 33 | Providing and fixing G.I. Pipes medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. Complete as per CPWD specification and direction of the Engineer-in-charge. A. External Work.xi. 150 mm dia. nominal bore. |
| 34 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality.150 mm dia |
| 35 | Providing & fitting fixing of MS flange (8 mm wall thickness) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer - in - charge. i. 150 mm dia. |
| 36 | Welding by gas or electric plant including transportion of plant at site etc. complete as per standard design. |
| 37 | Providing and fixing MS bolts including nuts and washers complete as per standard design:-Upto 300mm length. |
| 38 | Providing & fitting fixing G.I. bend / elbow in the pipe line including testing of joints complete as per CPWD Specification & direction of Engineer-in-charge.i) 125 mm dia |
| 39 | ii) 150 mm dia |
| 40 | Providing & fitting fixing PVC suction hose pipe overall thickness 5 mm of best quality at site of work (Pankaj made) of approved quality. 150 mm dia |
| 41 | Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality.150 mm dia |
| 42 | Providing & fitting fixing CI foot valve of heavy duty at site of work of approved quality.150 mm dia |
| 43 | Providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.150 mm dia |
| 44 | Providing & fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality.i) C.I foot valve weight |
| 45 | ii) C.I foot valve ring |
| 46 | iii) C.I foot valve net |
| 47 | Providing & fitting fixing of brass fullway valve with handle in the GI pipe line including cutting, threading etc, complete as per CPWD specification and direction of the Engineer-in-charge.i) 40 mm Dia |
| 48 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 49 | 12 mm cement plaster of mixCement mortar 1:4 (1 cement : 4 fine sand) |
| 50 | Neat cement punning. |
| 51 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of Engineerin- charge.40 mm thick with 20 mm well burnt brick aggregate. |
| 52 | Labour charge of lifting of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block as per direction of the Engineer-in-charge. |
| 53 | Labour charge for lowering & fifting fixing of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of the Engineer-in-charge. |
| 54 | Labour charge for dismentalling and overhauling of 5,000 to 20,000 GPH water lubricated vertical submesible pump after taking out shaft etc. including necessary fittings of new & existing submersible materials as per direction of the Engineer-in-charge. |
| 55 | Supplying & fitting fixing of spare parts for submersible pump 5 HP to 25 HP of approved quality as per direction of Engineer-in-Charge.i) Impeller of brass make |
| 56 | ii) Motor bush (Brass make) |
| 57 | iii) Sand guard |
| 58 | iv) Thrust bearing with plate |
| 59 | v) Pump bush (Brass make) |
| 60 | vi) Safety clamp |
| 61 | vii) Pump Shaft |
| 62 | viii) Pump Stainless steel sleeve |
| 63 | ix) Pump Coupling |
| 64 | x) pump neck ring |
| 65 | xi) Pump column nut |
| 66 | xii) Impeller key |
| 67 | Complete re-winding of 400/440 volt AC 3 phase vertical submersible motor of different make after taking out of entire burnt copper wire and rewinding the motor with proper gauge of supper enamel insulated copper wire of approved quality, tapping, insulating refitting the same as before including carring the motor from respective scheme and complete with trial run as per direction of the Engineer-in- Charge.12.5 HP to 22.5 HP |
| 68 | Complete re-winding of 400/440 volt AC 3 phase horizontal motor of different make after taking out of entire burnt copper wire and rewinding the motor with proper gauge of supper enamel copper wire of approved quality, tapping, insulating, varnishing with vernish heating polishing and re-fitting the same as before including carring the motor from respective scheme and complete with trial run as per direction of the Engineer-in- Charge.i. 20 HP |
| 69 | ii. 25 HP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender