Tender For Special Repair To Bldg No T-369 And T-359 J At Btsi At Si Lines Under Ge Bhopal
Tender Value
41.73 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
10 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-369 And T-359 J At Btsi At Si Lines Under Ge Bhopal
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Sep-2026 | Date Revised | Date | 10-Oct-2026 |
| 2 | 26-Sep-2026 | Date Revised | Date | 10-Oct-2026 |
| 3 | 01-Oct-2026 | Date amend | Date | 13-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Demolition of brickwork or stone /boulder masonry, built in CM including all quions, arches, pillars,etc but excluding ashlar facings.dressed stonework and precast concrete articles complete all as specified and directed. |
| 3 | M&L fly ash brick work with modular 'B' bricks in cm 1:6 using modular bricks straight or curved on plan to any radius complete all as specified and directed. |
| 4 | M&L 15mm thick rendering intwo (10mm+5mm ) CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement complete all as specified and directed. |
| 5 | S&F for 4mm thick Aluminium composite Panel sheet of approved nake and shade consisting of 0.5mm thick auminium sheet on both sides and 3mm thick LDPE core having PVDF coating on top surface with minimum 25 micron thickness,backing with service coating, fixed on existing steel structures/wall with necessary aluminium frame work comprising of top and bottom angle cleats, intermediate vertical/horizontal aluminium extruded sections,GI brackets,necessary screws,sealant,gaskets etc complete all as specified and as directed. |
| 6 | M&L for complete removal of old decorated surface of wall and Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed. |
| 7 | M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm after preparation of newly plastered surface of wall complete all as specified and directed. |
| 8 | M&L for applying of white wall care putty 1 mm thick on walls complete all as specifed and directed. |
| 9 | S&F in repair of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 10 | M&L for light shade, full body vitrified non skid ceramic tiles 9-10 mm thick, premium quality, coloured (of approved shade and design) area of each tiles exceeding 0.42sqm but not exceeding 1.00 sqm, joint free, as in floors and skirting etc. set and jointed in neat cement slurry and joints grouted with pigment to match with shade, laid over and including 15mm thick screed bed in CM (1:6) including dismantilling old tiles complete all as specified and as directed. |
| 11 | M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (area of each tiles exc 0.18 Sqm but not exc 0.38 Sqm) in floors and skirting set and jointed in neat cement slurry over and including screed bed 15cm in CM (1:6) and pointed in white or coloured cement to match with shade of tiles including dismantling of old tiling fixed in any mortar complete all as specified and directed. |
| 12 | M&L glazed ceramic coloured tiles in vertical surfaces 350x250x7mm /450x350x7mm thick set and jointed in cement slurry with joint free and pointed in white or coloured cement to match tiles including demolition of old tilescomplete all as specified and directed. |
| 13 | M&L for preparation of old painted surfaces of steel exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified. |
| 14 | S&F Pre-painted galvalume aluminium Zinc coating GI based corrugated steel sheet of 0.50mm thick (AZ-150) of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified including Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed. |
| 15 | S&F Pre-painted galvalume aluminium Zinc coating GI based plane steel sheet of 0.50mm thick (AZ-150) of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified including Dismantling asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed by Engineer in charge |
| 16 | M&L steel work in tubular/angle trusses including special shaped washers, purlins, rafters, posts etc using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed by Engr-in-Charge |
| 17 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified. |
| 18 | S&F for anodized aluminum snap grid frame work for false ceiling incl hangers 6mm dia/3mm dia GI wire adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long including dismantiling of old wall and ceiling board of any description fixed in any position any thickness cover fillets complete all as specified and directed. |
| 19 | S&F 6mm thick Exposed metal frame ceiling with PVC coated panels in ceiling of approved design by Engr-in-Charge PVC material having a minimum density of 600kg/m3. The panel dimension will be 600 mm x 600mm for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) |
| 20 | M&L granite 18-20 mm thick (of approved colour and texture) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade or granite complete all as specified and directed. |
| 21 | M&L 25 to 30 mm Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade -202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment approved pigment to match complete all as specified and directed. |
| 22 | S&F in repair 18mm plywood grade BWP IS-710, type BB fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge |
| 23 | S&F in reapir 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed by Engr-in-charge |
| 24 | S&F in repair to Cabinet Hinges Soft Close SS 8 Crank complete all as specified and directed |
| 25 | S&F 100 mm Stainless steel handle , cast type, polished bright complete all as specified and directed by Engr-in-Charge |
| 26 | S&F in repairs 40mm long magnetic catcher for cupboard shutter complete all as specified and directed. |
| 27 | S&F of kitchen baskets with 100% stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500mm car case depth of 558mm and height 100mm complete all as specified and directed. Make Life time-code: DSN 21 or equivalant as approved by GE. |
| 28 | S&F of kitchen baskets with 100% stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500mm car case depth of 558mm and height 150mm complete all as specified and directed. Make Life time-code: DSN 21 or equivalant as approved by GE. |
| 29 | S&F of kitchen baskets with 100% stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500mm car case depth of 558mm and height 200mm complete all as specified and directed. Make Life time-code: DSN 21 or equivalant as approved by GE. |
| 30 | S&F in repairs Stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed. |
| 31 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. including taking Down old aluminium partition complete all as specified and directed. |
| 32 | S&F Sheet glass 4 mm thick n exc 0.5 sqm in each pane fixed in aluminium or wooden windows complete all as specified and directed by Engr in charge. |
| 33 | S&F in repairs15mm bore, CP fancy type, Bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 34 | S&F Tubes 15mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old tube complete all as specified and directed. |
| 35 | S&F Tubes 20mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old tube complete all as specified and directed. |
| 36 | S&F in repair 75 mm PVC(SWR) pipes Single socketed in any length with rubber rings joints laid in trenches or in floors including Taking down eaves gutters and rainwater pipes (any size or pattern), complete all as specified and directed. |
| 37 | S&F in repair of PTMT waste coupling, 32 mm dia, half or full thread, complete all as specified and directed. |
| 38 | S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 39 | S&F in repair of SS grating of 125 mm dia size, complete all as specified and directed. |
| 40 | S&F in repair 75mm PVC(SWR) bend, jointed with solvent cement complete all as specified and directed. |
| 41 | S&F in repair 75mm PVC(SWR) junction single (single 'T') equal or unequal, jointed with solvent cement complete all as specified and directed. |
| 42 | M&L in repair PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specified and direcetd. |
| 43 | S&F in repairs 12mm thick toughfen glass in door, partitions etc similar work etc with stainless steel handle, locking arrangement and with hinges in approved shape and design complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F of solar control film 25 micron reflective type sticked to glass panes as per manufacturer instructions complete all as specified and directed. |
| 45 | S&F heavy weight stainless steel hydraulic patch fittings for single leaf having single bolt and single strock of minimum size 190 mm x 70 x 40 mm complete all as specified and as directed. |
| 46 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 47 | S&F stainless steel heavy duty D-shaped patch lock and strike plated two set of keys suitable to be operated from both sides fixed to 12 mm thick glass door complete all as specified and as directed. |
| 48 | S&F heavy duty stainless steel (grade 304) H shaped handles 300 mm long fixed to toughened glass door with one pair of collar and screws complete all as specified and as directed. |
| 49 | M&L in repair 25mm Stainless Steel Drepary curtain rod decorative type incl curtain fancy type including bracket & nobs complete all as specified and directed |
| 50 | S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks 3 layers(Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling old water tanks complete all as specified and as directed. |
| 51 | S & F in repair 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe with epoxy coated aluminium rod complete all as specified and as directed. |
| 52 | Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed. |
| 53 | Dismantling/taking down of unserviceable old existing service /submain wire of any size all as specified and directed |
| 54 | Dismantling/taking down of unserviceable distribution boards with MCBs all as specified and directed. |
| 55 | Taking down carefully serviceable/unserviceable exhaust fans of any size from its position, and deposited to E/M office store yard all as specified and directed. |
| 56 | Taking down carefully ceiling fans of any size from its position, and deposited to E/M office store yard all as specified and directed. |
| 57 | Taking down and refixing of LED tube light fitting bright 18/20 Watt. slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 58 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LS H cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed (Note cost of cutting chase and making good shall be included in the quated rates) |
| 59 | All as per Srl item No 57.00 here-in-before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge. |
| 60 | All as per Srl item No 57.00 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge. |
| 61 | All as per Srl item No 57.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge. |
| 62 | All as per Srl item NO 57.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4.0 Sqmm and 4.0 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge. |
| 63 | S & F modular switch one way 6 Amp one module, 240 volts complete all as specified and directed by Engineer - in - Charge |
| 64 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed by Engineer - in - Charge |
| 65 | S & F modular switch one way 16 Amp one module, 240 volts complete all as specified and directed by Engineer - in - Charge |
| 66 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed by Engineer - in - Charge |
| 67 | S&F modular ceiling rose 3 terminals 65x25 mm dia poly carbonate isolated all as specified & directed. |
| 68 | S&F modular lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed. |
| 69 | S & F in replacement stepped type modular electronic fan regulator as reqd. complete all as specified and directed by Engineer - in - Charge |
| 70 | Supply & fixing in replacement LED tube light complete fitting 40 watt 220V, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose comlete all as specified and directed by Engineer in charge . |
| 71 | S & F in replacement LED lamp 10 Watt B22 CDL complete all as specified and directed by Engineer in Charge |
| 72 | S&F LED ultra slim decorative aluminium casted edge ceiling light, recess mounting LED 2 x 2, luminaire 36 watt Warm white in colour with all accessories internally pre-wired and including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm three core complete all as specified & directed. |
| 73 | S&F post top lantern fitting made up off pressure die cast alluminium body and coral PC cover IP 65 Protection and IK 07 rating , 50 Watt warm LED colour, energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution with accessories incl fitting arrangement upto 80 mm dia medium grade GI pipe over the gate side coloum complete all as specified and directed. |
| 74 | Supply & fixing LED Garden Light (BAMBOO LED BOLLARD) 900mm long new generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source complete all as specified and directed. Cat part No-BAMBOOBLS8WLED830PSYMTOPC of Havells or equivqlent Bajaj / C&G complete all as specified and directed by Engineer in charge |
| 75 | S&F of PVC insulated PVC sheathed, flexible circular cable 3 core, 2.5 Sqmm strandered copper conductor AC, 230 V complete all as specified and directed. |
| 76 | S&F non metalic heavy grade PVC conduit ISI marked of size 20mm dia incl all accessories complete all as specified and directed. |
| 77 | Supply & fixing decorative wall light, gold finish fixture with white glass diffuser single Arm Brown Metal Wall Light colour- Metal (Black Antique) Glass (White) Cap Type: suitable for E27 Holder to fit LED bulb & Maximum Wattage Support : Upto 40W- Voltage : 220V.design:- Versatile & Stylish design with modern fittings & Metal frame. incl 9 W warm LED bulb suitable for Bedroom, Living room etc. complete all as specified and directed by Engineer in charge. |
| 78 | Supply and fixing in replacement factory made epoxy powder coated Distribution Board TP & N 4 ways ( VTPN MCCB DB ) and space for MCCB as incomer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.NOTE:- MCCB shall be measured and paid seperatly. |
| 79 | S&F in replacement MCCB 125 Amp, 3 Pole, breaking capacity 36 KA with complete electrical connections by appropriate size of copper lugs, complete all as specified and directed. |
| 80 | S & F in replacement sheet metal enclosure double door type surface mounted concealed in wall 12 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. |
| 81 | S&F sheet metal enclosure for MCB, DB, TPN, 415 Volts, 200 amps rated busbar, 4 way, Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 54 including wooden rectangle board of first class hardwood of suitable size for mounting of DB box complete all as specified and as directed. NOTE:- MCB shall be measured and paid seperatly. |
| 82 | S & F in replacement MCB SP suitable for 240 volts, AC supply 6 to 32 Amps , with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. |
| 83 | S & F in replacement MCB SPN suitable for 240 volts, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. |
| 84 | S&F in repair MCB TPN suitable for 415 volts, 'B' curve,AC supply 100 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, complete all as specified and directed. |
| 85 | M&L in replacement for sub main wiring (Single phase) with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 25 mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. Note : (i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 6.0 sqmm cable, one run of 6.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 86 | M&L in replacement for sub main wiring (Three phase) with Four runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 25mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. Note : (i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 6.0 sqmm cable, one run of 6.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 87 | M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulated ISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into 20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 88 | M&L in replacement for sub main wiring (Three phase) with four runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 25mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with four runs of 4 sqmm cable & one run of 4 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. Note : (i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4 sqmm cable, one run of 4 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 89 | Supply and fix of LED slim square/circular panel light fitting for surface ceiling light 15 watt, colour warm including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 90 | Supply & Fix Recess mounted downlighter with pressure die-cast aluminium heat sink & clear PC as a cover in white powder coated finish with Independent electronic LED driver. mounting COB Spot LED light round warm in colour with excellent thermally managed luminaire 9 watt , 220V AC with high efficiency PMMA diffuser soft glare free light suitable for roof ceiling including connecting up with driver three core flexible coppder conductor cases of suitable size complete all as specified and directed by Engineer in charge. |
| 91 | S&F in replacement building security light fitting complete with 36 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamp and nut bolts washers and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed |
| 92 | M&L in replacement of earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed.NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 93 | Supply and fix in replacement sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one Single pole MCB 240 V grade 25/20 Amp complete all as specified and directed . |
| 94 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 95 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 days
Oct 10, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 days
Oct 13, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender