Tender For Providing Of Drainage And Associated Amenities At Bhisiana Under Ge (Af) Bhisiana
Tender Value
43.65 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
2 days left
EMD
87300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Drainage And Associated Amenities At Bhisiana Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removing debries/rubbish material from site to outside MOD land complete all as specified and as directed. |
| 2 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 3 | Material and labour for 15mm thick cement plastering/ rendering in cement mortar (1:4) on any face of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed. |
| 4 | Material and labour for PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in surface channels/drains, benching/coping of manholes/drains, & similar work etc including compacting, finishing to the required line, level and slope, curing complete, and forming channels where required, including necessary form work as required etc. complete all as specified and as directed. |
| 5 | Material and labour for PCC (1:2:4), type B-1 using 20 mm graded stone aggregate as in surface channels, benching/coping of manholes/drains, coping, mud stops, packing sides/around of interlocking tiles, kerbs, bed block, cills, thrust block, for embedded posts & similar work etc at ground and normal height including weatherings, slightly rounded or chamfered angles and including necessary form work as required etc. complete all as specified and as directed. |
| 6 | Material and labour for PCC ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed |
| 7 | Material and labour for Extra for forming fair finished drain or channel exceeding 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. (inner girth only measured) complete all as specified and as directed. |
| 8 | Supply and laying/fixing 80mm thick factory-made chamfered edge cement concrete paver block/ interlocking tile of M-40 grade, conforming to IS 15658:2021, grey cement with pigment, with approved design/size/ shape made by table vibratory method using PU mould, laid as in footpath, parks, lawns, drive ways or light traffic parking etc., over and including 30mm thick compacted bed of fine sand and filling the joints with sand, compacting through vibratory compaction by using plate vibrator, finishing and sweeping extra sand complete all as specified and as directed. |
| 9 | Supply and laying/fixing 80mm thick factory-made chamfered edge cement concrete paver block/ interlocking tile of M-40 grade, conforming to IS 15658:2021, pre-polished & pre-glazed, with approved colour/design/size/ shape made by table vibratory method using PU mould, laid in required colour & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., over and including 30mm thick compacted bed of fine sand and filling the joints with sand, compacting through vibratory compaction by using plate vibrator, finishing and sweeping extra sand complete all as specified and as directed. |
| 10 | Material and labour for mild steel framed work comprising grills, gratings, drain cover, walkways, railing and other similar works, etc fabricated from angles, tees, square bar, expanded metals or other rolled steel sections, round bars, stiffeners and other connecting plates, conforming to Grade 290.Gde-E-165. The work shall include cutting, bending, notching, coping, drilling, punching, shaping, edge preparation, welding, grinding of welds, fabrication, shop assembly, transportation, erection, alignment and fixing in position with approved holding-down bolts, anchor fasteners, nuts, bolts, washers and all necessary fixing accessories. The item shall include all labour, materials, welding electrodes, gas cutting, scaffolding, staging, lifting arrangements, tools and plant, consumables, safety measures and all incidental works necessary for satisfactory completion of the work at all locations, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 11 | Excavation in trenches (Manual), not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations of shafts, wells, cess pits, manholes, pipe line, cable in trenches etc., not exceeding 10 Sqm on plan and getting out in any type of soft including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed. |
| 12 | Returning, filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed. |
| 13 | Removing excavated material (surplus soil) to a distance exceeding 50 m but not exceeding 250 mand depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. |
| 14 | Supply & laying RCC pipe 450mm dia class NP3 laid and jointed complete with collars including laying pipes level or to falls in trenches etc on concrete bed or directly on hard ground as directed and making joints and testing complete all as specified and as directed. (Note : Excavation, earth work and PCC for bed and for cradles as required shall be measured & paid separately under appropriate item of BOQ) |
| 15 | Material and labour for providing and laying cement concrete (1:3:6), Type C2, using 40 mm graded stone aggregate, as bedding for 450 mm internal diameter drain pipes, including packing below the barrel and haunching against the sides of the pipes after laying and testing, including necessary formwork and all incidental works, complete all as specified and as directed by the Engineer-in-Charge.Note: The concrete bedding shall be 150 mm thick below the barrel of the pipe, and shall extend 150 mm laterally beyond either side of the external diameter of the pipe, complete as specified. Please Enable Macros to View BoQ information |
| 16 | Material and labour for providing and laying cement concrete (1:3:6), Type C2, using 40 mm graded stone aggregate, as bedding for 450 mm internal diameter drain pipes, including packing below the barrel and haunching against the sides of the pipes after laying and testing, including necessary formwork and all incidental works, complete all as specified and as directed by the Engineer-in-Charge.Note: The concrete bedding shall be 150 mm thick below the barrel of the pipe, and shall extend 150 mm laterally beyond either side of the external diameter of the pipe, complete as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender