Defence Statutory Bodies & Commissions/Committees Closing in 9 days TDR #57512900

Tender For Addition/Alteration And Special Repair To And Improvement In Specification At Certain Smqs At Af Stn Bkt

Issued by Statutory Bodies & Commissions/Committees · Lucknow, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Oct 2026
9 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Addition/Alteration And Special Repair To And Improvement In Specification At Certain Smqs At Af Stn Bkt

BOQ

Name of Work:- ADDN / ALTN AND SPECIAL REPAIR TO AND IMPROVEMENT IN SPECIFICATION AT CERTAIN SMQS AT AF STN BKT
Sl. No. Item Description
1Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed.
2Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
3M&L for Non - skid coloured Digital Ceramic tiles size 300x300mm, 7 to 8 mm thick , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
4M&L for Non - skid dark coloured Vitrified double charged tiles size 600mm x 600mm, 10 mm thick area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and painted in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
5All as per above but in skirting to walls including 10mm thick cement plaster in cement mortar (1:4) as backing coat on fair faces on stone surface complete all as specified and directed.
6M&L for light coloured Glazed ceramic tiles in vertical surface of sized 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in cement mortar (1:4) as backing coat on fair faces on stone surface complete all as specified and directed.
7M&L for machine cut Kota stone slab 20-22 mm thick (of size not less than 55 cm x 55 cm in flooring and 120 cm x 25 cm in treads laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including half round edge moulding, over and including cement screed bed 20 mm thick in cement mortar (1:6) base including rubbing and mirror polishing, and half nose moulding (bull nosing) etc, complete all as specified and directed.
8M&L for machine cut Kota stone slab 18-20 mm thick (of length not less than 55 cm in skirting and 120 cm in risers) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as in vertical surfaces such as skirting and risers over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, complete all as specified and directed.
9Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed.
10M&L for granite slab work 18 to 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed.
11Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
12M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 all as directed and specified.
13M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) as specified and directed
14M & L for taking down cement plaster on brick or concrete surfaces walls/chajja/roof, facia at any height including racking out joints hacking for key scrubbing down with water etc and rendering 15 mm thick in cement mortar (1:4) on fair face of brick work of walls including mixed with water proofing compound (ISI Marked) @ 2% by weight of cement or as per manufacturer's instructions finished even & smooth without using extra cement complete all as specified including mouldings chamfers splay rounded or coved angles. Beards grooves and rebate upto 10 cms in width or 15 cms in girth. Complete all as specified and directed.
15M &L for preparing of putty surfaces of finishing walls with paint of required shade applying two or more coats of 100% Premium acrylic exterior emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm on putty surfaces complete all as specified and directed.
16Taking down cement plaster from brick walls masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.
17M&L for 15mm thick rendering in cement mortar (1:6) on brick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified and directed.
18M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper over one coat of wall care putty, on new plastered surfaces of walls complete all as specified and directed.
19M&L for preparation of old distempered surfaces of wall by washing rubbing down and stopping of old distempered surface of wall including cornices etc and 1mm thick of wall care putty as required for levelling and applying two coat of oil bound distemper (Oil emulsion any tint) on wall complete all as specified and directed.
20M&L for rendering 10 mm thick on fair faces of brick or concrete surface of ceilings, in cement mortar (1:3) rendering is to be finished even and smooth without using extra cement complete all as specified and directed.
21M & L for preparation and applying two coat of white wash on new plastered surface of ceiling complete all as specified and directed
22M&L for preparing old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of ceiling including cornices, pilasters etc and applying one coats of white wash complete all as specified and directed. Please Enable Macros to View BoQ information
23M&L for preparing old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of ceiling including cornices, pilasters etc and applying one coats of white wash complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57512900
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 05-10-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Addition/Alteration And Special Repair To And Improvement In Specification At Certain Smqs At Af Stn Bkt
Basic Detail
Tender No 8923/BKT/E8
Bidding Type Tender
Location
City Lucknow
State Uttar Pradesh
Key Dates
Publish Date 14 Sep 2026
Submission Date 05 Oct 2026
Open Date 08 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 88000
Exemption Not Available
Document List
69067529-f2fb-4b3c-8aac-25fd01a8e6c8.html
8923credit.pdf
8923tenderdocuments.pdf
BOQ_884787.xls
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Oct 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

69067529-f2fb-4b3c-8aac-25fd01a8e6c8.html

pdf

8923credit.pdf

pdf

8923tenderdocuments.pdf

xls

BOQ_884787.xls

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders