Tender For Special Repair Of Bldg No 222 And 224 At Hq 72 Sub Area Under Ge 865 Wes.
Tender Value
17.57 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
5 days left
EMD
35200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Bldg No 222 And 224 At Hq 72 Sub Area Under Ge 865 Wes.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of precast concrete block walling built in cement mortar, complete all as specified and as directed. |
| 2 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 3 | M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 4 | M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed. |
| 5 | M&L for preperation of new plastered wall surface of any description and applying two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed. |
| 6 | M & L Preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls. |
| 7 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as directed by Engr-in-charge. |
| 8 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge. |
| 9 | M & L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 10 | M & L glazed (coloured) ceramic tiles of size 300mm x 450mm x 7mm thick, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to match with the shade of tiles including rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles all as specified and Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 11 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar, complete all as specified and directed. |
| 12 | M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 13 | M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate including demolition, complete all as specified and directed. |
| 14 | S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed. |
| 15 | Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast bed block and like including dismantling of any description complete all as specified and as directed by the Engr-in-Charge. |
| 16 | S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed. |
| 17 | S&F for 30 mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats, complete all as directed. |
| 18 | S&F 2nd class soft wood 35 mm thick glazed and skeleton shutter, open and prepared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and as directed by the Engr-in-Charge. |
| 19 | M&L sheet glass 4.8 mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 20 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 21 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete. |
| 22 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 23 | S&F floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and as directed. |
| 24 | S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed. |
| 25 | S&F mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed. |
| 26 | S&F in repair aluminium (extruded section) door closer hydraulically regulated designation No 3, universal type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg and fixed, complete all as specified and as directed. |
| 27 | S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed. |
| 28 | S & F in repair fancy type, chromium plated 20 mm bore angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 29 | S & F in repairs fancy type 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfy handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 30 | S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge and including taking up or down 25 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete all as specified and as directed. |
| 31 | S & F in repair vitreous china wash down water closet (Pedestal), white (EWC) excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed. |
| 32 | 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with linlet,ball valve, float and handle including brackets, complete all as specified and as directed. |
| 33 | S&F in repairs, 15 mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and directed. |
| 34 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 35 | S & F in repair sink with drain board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 36 | S & F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible waste pipe including waste coupling, complete all as specified and as directed. |
| 37 | S & F stainless stell wall mounted kitchen plate rack made of stainless steel 0.80mm thick sheet standard size 750x900x250mm and design as approved by Engr in chagre and fixed to wall with wooden plug & screw (Fixed in repair) complete all as specified and directed. |
| 38 | S & F two way angle cock, fancy type chromium plated with long shank and cup (two way angle valve type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions for bore of pipe 15mm complete all as specified and directed. Note :Two way angle cock Garnet Quarter turn fittings 2 Way angle cock. |
| 39 | S&F in repair 15mm bore CP central hole basin mixer without Pop-up waste system with 450mm long copper pipes chrome finish complete all as specified and as directed. |
| 40 | S & F in repairs Vitreous china wash basin white flat back size 550 x 400 mm excluding taps, waste,chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 41 | S & F in repair acrylic PVC bathroom cabinet of size 550 x 400 mm with openable shutter fixed with looking mirror of selected quality and with suitable shelves in side the cabinet of superior quality as approved and directed by Engr in Charge. |
| 42 | S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position completed all as specified and directed. |
| 43 | S & F in repair CP toilet jet spary ABS with double lock 1.2 mtr CP tube stainless steel flexible hose all as specified and as directed. |
| 44 | S & F in repair CP towel ring of dia 200mm fixed with and including screws and wooden/plastic cleats complete all as specified and as directed. |
| 45 | M&L for preperation of new wooden or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed. |
| 46 | S & F in repair CP floor gratings 150mm dia, complete all as specified and as directed. |
| 47 | S & F in repair fancy type glass corner self with CP brackets etc complete all as specified and directed. |
| 48 | S & F Chrominum plated brass soap dish (Oval shape) to walls (size not less than 125mm long) complete fix to wall all as specified and direced. |
| 49 | S & F in repair toilet paper holder with flat recessed type stainless steel fixed with screws complete all as specified and directed by Engr-in charge. |
| 50 | Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern, complete all as specified and as directed. |
| 51 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed. |
| 52 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and as directed. |
| 53 | S &F Pre-painted galvanum aluminum zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering /clading to walls fixed with self tapping screws complete all as specified and directed. |
| 54 | M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 55 | S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed. |
| 56 | S&F in repairs Towel rail 600mm long Cromum plated (Minimum weight 190 gms), complete all as specified and as directed. |
| 57 | M&L for TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) , complete all as specified and directed. |
| 58 | M&L for providing precast cement concrete 1:2:4 type B-1, (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles withand similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.Note : S&F reinforcement shall be measured and paid separately. |
| 59 | S&F 75mm bore PVC (SWR) pipe single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber joints fixed to walls complete all as specified and directed. |
| 60 | S&F 75mm bore PVC (SWR) pipe bends complete all as specified and directed. |
| 61 | S & F PVC (SWR) 75 mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed. |
| 62 | S&F in repair CP wall mixer 3-in-1 system with provision for bath Telephone shower and over head shower with bend pipe complete all as specified and directed.(Cat Part SHFLR 5281 of Jaquar or in equivalent in Kohler/Cera. |
| 63 | S & F anodised aluminium snap grid of size 605 x 605 frame work of false ceiling including hanger 6mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling clearts made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified and directed. |
| 64 | M & L providing and fixing Gypsum board 12mm thick and 600 x 600 mm in size in ceiling fixed with screw or with staples on snap grid as per manufactured instructions including dismantlng of old boarding, complete all as specified and directed. |
| 65 | M&L form work for rough finished concrete surfaces to sides and soffits of floor or roof beam ,beam haunchings ,girders, bresum-mers,lintles,cantilevers,shelves including supports ,overhanging, etc. also splays between floors and beams,etc, complete all as specified and as directed. |
| 66 | Form work to edges of concrete flats in floors openings in concrete walls floor and roof and sides of RCC/PCC bands in walls horizontal or sloping and similar work n exc 20 cm wide, complete all as specified and as directed. |
| 67 | Dismantling of cast iron pipe of internal dia 75mm or reinforced concrete drain pipes, jointed in cement mortor and taking out of trenches , if required and complete all as specified and directed. |
| 68 | Deduct Schedule of Credit of Rs (-) 23040.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender