Tender For Estimate For The Cost Of Renovation Work In Inspection Bungalow At Vellappara In Idukki Wildlife Sanctuary During 2026-27
Tender Value
9.96 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
7 days left
EMD
25000
Bank guarantee accepted
Document Fee
2400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Idukki → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For The Cost Of Renovation Work In Inspection Bungalow At Vellappara In Idukki Wildlife Sanctuary During 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | 13.91Removing dry or oil bound distemper, water proofing cement paint and the like byscrapping, sand papering and preparing the surface smooth including necessary repairsto scratches etc. complete. |
| 2 | 15.23.2Dismantling tile work in floors and roofs laid in cement mortar including stackingmaterial within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm |
| 3 | 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malbaall complete as per directions of Engineer-in-Charge |
| 4 | OD74431/2026-2027Engaging labour for different type of work |
| 5 | 50.6.1.4Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cmor nearest available size confirming to IS 2185 part I of 1979 for foundation and plinthwith thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete |
| 6 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 7 | 11.49.3Providing and laying Vitrified tiles in floor with different sizes (thickness to bespecified by the manufacturer), with water absorption less than 0.08% and conformingto IS : 15622, of approved brand & manufacturer, in all colours and shade, laidwith cement based high polymer modified quick set tile adhesive (water based)conforming to IS : 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately).Size of Tile 800x800 mm |
| 8 | 13.80Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 9 | 13.98.1Wall painting with plastic emulsion paint of approved brand and manufacture to givean even shade:One or more coats on old work |
| 10 | 50.18.9.22.4Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement- 110 mm dia Bend |
| 11 | 50.18.9.9.2 Providing and fixing PVC pipes includes joints of pipes with one step PVC solventcement, trenching, refilling & testing of joints complete as per direction ofEngineer in CHarge. 110 mm dia 4 Kg/cm2 |
| 12 | 13.99.1Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade :One or more coats on old work |
| 13 | 50.18.9.22.3Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement-110 mm dia Door Elbow |
| 14 | 50.18.7.2.1Providing and fixing PVC pipes, fittings including fixing the pipe with claps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge20 mm dia 12Kgf/cm2 - Internal work - Exposed on wall |
| 15 | 17.7.3Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Wash basinsize 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 16 | 50.18.7.6.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 50 mmdia 6 Kgf/cm2 - Internal work- Exposed on wall |
| 17 | 13.68.1French spirit polishing:Two or more coats on new works including a coat of woodfiller |
| 18 | 18.51.1Providing and fixing C.P. brass long body bib cock of approved quality conforming toIS standards and weighing not less than 690 gms.15 mm nominal bore |
| 19 | OD90328/2026-2027Providing counter top wash basin, HDHMR vanity cabinet ,soft-close hings andhandles including labour charges |
| 20 | 17.68.1Providing and fixing vitreous china dual purpose closet suitable for use as squattingpan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixedwith C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern withfittings and brackets, 40mm flush bend, 20 mm over flow pipe, with specials ofstandard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls andfloors wherever required:White vitreous china dual purpose WC pan with white solidplastic seat and lid with white vitreous china flushing cistern and C.P. flush bend |
| 21 | 11.48.3Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy groutmix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kgof resin per kg). including filling /grouting and finishing complete as per direction ofEngineer-in-charge.Size of Tile 800x800mm |
| 22 | OD88822/2026-2027Providing wooden partition wall and counter top wash basin, HDHMR vanity cabinet,soft-close hings and handles including labour charges |
| 23 | 50.17.1.5Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make )including cost of materials and labour charges etc complete as per the direction of siteEngineer-in-charge. |
| 24 | OD90955/2026-2027Supplying and fixing hand shower or wall shower including all fittings |
| 25 | 50.17.1.1Supplying and fixing Stainless steel soap dish including cost of materials and labourcharges etc complete as per the direction of site Engineer-in-charge. |
| 26 | 9.121Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturatedpolyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shallbe filled with suitable wooden block in all the three legs. The frame shall be coveredwith fiber glass from all sides. M.S. stay shall be provided at the bottom to steady theframe. |
| 27 | 9.122.1Providing and fixing to existing door frames.30 mm thick Glas Fibre ReinforcedPlastic (FRP) panelled door shutter of required colour and approved brand andmanufacture, made with fire - retardant grade unsaturated polyester resin, moulded to3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame andsuitable blocks of seasoned wood inside at required places for fixing of fittings, castmonolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856,including fixing to frames |
| 28 | 12.45.1Providing and fixing false ceiling at all height including providing and fixing of framework made of special sections, power pressed from M.S. sheets and galvanized withzinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting ofangle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mmdia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangersof 25x10x0.50 mm of required length with nuts & bolts of required size and otherend of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running atthe spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thickbottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm longG.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mmhigh having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wallscrews @ 230 mm interval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c,including jointing and finishing to a flush finish of tapered and square edges of theboard with recommended jointing compound, jointing tapes, finishing with jointingcompound in 3 layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer's specification and alsoincluding the cost of making openings for light fittings, grills, diffusers, cutouts madewith frame of perimeter channels suitably fixed, all complete as per drawings,specification and direction of the Engineer in Charge but excluding the cost of paintingwith:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1:2011 (Board with BIS certification marks) |
| 29 | 13.60.1Wall painting with acrylic emulsion paint of approved brand and manufacture to givean even shade:Two or more coats on new work |
| 30 | 13.43.1Applying one coat of water thinnable cement primer of approved brand andmanufacture on wall surface:Water thinnable cement primer |
| 31 | 50.17.1.3Supplying and fixing CP Towel rod 60cm or nearest available length including cost ofmaterials and labour charges etc complete as per the direction of site Engineer-incharge. |
| 32 | 9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as perIS: 1868) aluminium lever handles of approved quality with necessary screws etc .complete |
| 33 | OD94030/2026-2027Providing and fixing curtain best quality to windows and opening area etc includingfittings labour carrying etc complete |
| 34 | Amount for Electrification. |
| 35 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender