Tender For Upgradation Of Existing 125 Kva Dg Set To 320 Kva Dg Set In Isbt, Sector-43, Chandigarh.
Tender Value
37.67 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
12 days left
EMD
75350
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Existing 125 Kva Dg Set To 320 Kva Dg Set In Isbt, Sector-43, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | DSR item No.29.1 Supplying, Installation, Testing & Commissioning of ‘Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other necessary arrangements Complete as per CPWD specifications, should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location, rating plate as per relevant IS Code etc. and consisting of the followings: (Please refer DNIT for complete specification of item no.01) |
| 2 | 320 KVA |
| 3 | DSR 2.6 (Civil) Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10sqmm (on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m disposal earth to be leveled and neatly dressed.i) All kind of soil. |
| 4 | DSR 2.27 (Civil) Supplying and filling in plinth with jamuna sand under floors including, watering, ramming consolidating and dressing complete. |
| 5 | DSR item No. 4.1.11 (Civil) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level. |
| 6 | 1:5:10 (1 cement: 5 finesand derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 7 | DSR 5.22(Civil) Steel Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.Thermo-mechanically treated bars of grade Fe-500D or more. |
| 8 | DSR 5.1 (Civil) Providing and laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level: |
| 9 | 1:2:4 (1 cement: 2 coarse sand(zone-III) derived from natural source: 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 10 | DSR 13.1.1 (Civil) 12 mm cement plaster of mix: 13.1.1 1:4 (1 cement: 4 fine sand) |
| 11 | DSR Item No. 5.9.1 (Civil) Centering and shuttering including strutting, propping etc. and removal of form for: |
| 12 | Foundations, footings, basis of columns, etc. for mass concrete. |
| 13 | DSR 5.4 Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (with charcoal/coke and salt) as required. |
| 14 | DSR 5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 15 | DSR 11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 16 | 3½ X 240 sq. mm (62mm) |
| 17 | 3½ X 300 sq. mm (70mm) |
| 18 | DSR item No.15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 19 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 20 | Supply and laying of XLPE insulated PVC sheathed Aluminum conductor armoured cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing RCC/ HUME/ METAL/ DWC pipe / on surface with the help of MS clamp suitable size as required at site. The job includes labour charges of laying the cable and making connections with suitable size aluminium lugs/thimbles etc as required at site to complete the job to the entire satisfaction of Engineer-in-Charge. The cable should be of Havells/ Polycab/ RR Kabel/ KEI/ Finolexmake only. |
| 21 | Size 300 Sq. mm. 3.5 Core |
| 22 | DSR item No.2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. |
| 23 | 100 A,30KA,FPMCCB |
| 24 | Providing and fixing following rating MCCB 4 pole 415 Volt Microprocessor Releasefor Over load and short circuit protection, (Ics=100% Icu) with positive isolation. The overload & short circuit release shall be of adjustable type, suitable for isolation The MCCB is to be installed in existing cubicle panel / angle iron board/ VTPN BDB / MCCB enclosure including drilling holes in cubicle panel / angle iron board, making connections with suitable rating of copper wire / copper strip etc. as required. The job includes the cost of spreaders terminal links. The job also includes cost of MS enclosure or direct/ extended rotary handle etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. The MCCB should be of Lauritz Knudsen/ Siemens/ Schneider/ Legrand/ ABB/Hager make only. |
| 25 | 630 Amp. 4 Pole 50 KA Breaking Capacity MCCB Microprocessor release with adjustable LSIG protections. |
| 26 | Fabrication, Supplying, Installation, Testing and Commissioning of Indoor type cubicle type fully enclosed compartmentalized Electric Panel of suitable size (300mm-900mm) deep as required at site suitable for three phase 50 Hz 415 volt AC supply system made out of 1.6 mm thick CRCA sheet duly strong thread with suitable size of MS channel members and base weather proof dust and vermin proof, ventilated with louvers at sides removable gland plates at the bottom, earthing studs at both ends duly painted with powder coated finish of approved shade and two coats of anticorrosion paint including providing and fixing of four strip main and auxiliary aluminium bus bars of rating (600 amp.) (Please refer DNIT for complete specification of item no.16) |
| 27 | Making of Haudi of following size for drawing of underground cable etc. constructed with bricks wall 9” thick and plastered from the inner side with cement, sand, mixture 1:5. The RCC cover moulded in an angle frame of size 35mm x 35mm x 5mm should be provided above the Haudi which should rest on 40mm x 40mm x 5mm angle iron frame fixed on the upper portion of the Haudi. The cover should be provided with lifting arrangement. The rate includes all labour and material to complete the job with 1:4 CC mixture. |
| 28 | Size 2’x2’x2’ deep Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender