Tender For Construction Of Ps Moh. Bakarwalan Pyt. Dara Dullian Upper Block Poonch Under Pri Grant Year 2026-27 1St Call
Tender Value
4.92 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
6 days left
EMD
9840
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ps Moh. Bakarwalan Pyt. Dara Dullian Upper Block Poonch Under Pri Grant Year 2026-27 1St Call
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of soil : |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size) with 20% stones |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 above foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and medium tensile steel bars |
| 7 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 8 | 15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 9 | 6mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for: beam |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for: slab |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for: edges |
| 14 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately): |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with Rate for thickness ofnecessary screws, excluding panelling which will be paid for separately, all shutter in mm per sqmcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges andnecessary screws shall be paid separately). |
| 16 | Providing and fixing glazed shutters for doors, windows and clerestory windows Rate for thickness ofusing 4mm thick float glass panes including ISI marked M.S. pressed butt shutters in mm per sqmhinges bright finished of required size with necessary screws |
| 17 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of Rate for thickness ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm shutters in mm per sqmfor doors, windows and clerestory windows with ISI marked M.S. pressed butt 35mm 30mmhinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge : |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Plain particle board flat pressed, 3 layer or graded wood particle boardmedium density Grade I, IS : 3087 marked |
| 19 | Providing and fixing vitrified floor tiles |
| 20 | Providing and fixing vitrified floor tiles in skirting |
| 21 | Finishing walls with water proofing paint 2 or more coats |
| 22 | Distempering with oil bound distemper 2 or more coats |
| 23 | Painting with synthewtic enamel paint 2 or more coats |
| 24 | Carriage of Stone Agg. by 05 KM by MT and 100m hl |
| 25 | Carriage of Bricks 155 Kmt. By MT |
| 26 | P/fixing tower bolt 100*10 mm |
| 27 | P/fixing tower bolt 150*10 mm |
| 28 | P/fixing Al handles 125mm |
| 29 | P/fixing Al handles 100mm |
| 30 | P/fixing sliding door bolt |
| 31 | Add the Cost of CIB Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender