Tender For Estimate For Construction Of Dr. Mangal Sen Memorial Bhawan (Civil Work, Plumbing Work And Electrical Work) In One Acre Land At Rohtak Under Municipal Corporation Rohtak (Est. Construction Rs. 1731.01 Lakh)
Tender Value
13.26 Crore
Estimated cost
Bid Submission
05 Oct 2026
20 days left
EMD
34.62 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rohtak → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Construction Of Dr. Mangal Sen Memorial Bhawan (Civil Work, Plumbing Work And Electrical Work) In One Acre Land At Rohtak Under Municipal Corporation Rohtak (Est. Construction Rs. 1731.01 Lakh)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing Corsica Burnout Set of 2 Printed Sheer DoorCurtains. Dress up your space with this set of curtains featuring loopprints. Made of a cotton blend construction, this pair includes hiddenloops for elegant draping. The sheer design lets light in while givingyou some privacy. Product : 2 CurtainsDimensions : Curtain: 1.10x2.25mFinish : SheerMaterial : PolyesterSet Size : Set of 2PcsDesign : PrintedCare Instructions: Hand WashCollection : Corsica BurnoutNet Quantity : 2 N For Consumer Complaints Contact : Name: SyedIsmail, Email: [email protected],Lifestyle International Pvt Ltd, 1800-212-7500Country of Origin : India Manufacture and Marketed by: Lifestyle Int Pvt Ltd.77 Degree Town Centre.Building No.3. WestWing.Off HAL Airport Road. Yamlur.Bangalore-560037 Color :PurpleComplete in all respect as per satisfaction of engineer in charge. |
| 2 | Supply and Fixing of Slim Glass partition of 12mm Toughened Glassusing Frames to a height of maximum 3m or as per drawing.The Fixedglass to be fixed using Profiles at Top and Bottom at sides. The profilesize to be 45x25MM to be fixed on to the floor/wall/ ceiling as per thearchitect design. Junction profile to be used at all Glass to Glass verticaljoints, 90 Deg L Junction Profiles and T Junction profiles necessary asper design.In case of Glass overall panel Overpanel Profile to beused.In case of Open glass edges EP45 End Profile to be used. TheAlexa profiles shall be suitable for Glass thickness of10/12/13.52mm.The Profile shall be matt natural anodized, the ProfileManufacturer to supply all the necessary clips, seals and fixingaccessories for the system. All Profiles to be with 2 mm Gaugethickness Excluding 20 Micron of Anodizing. Approved Manufacturer |
| 3 | Supply and Fixing of Glass Door (Single Leaf) of 10mm toughened glasswith frames all around the door. 5 Door Profile frame of size45X50mm with seals with Hinges and Locks (1no) in aluminium silver(EV1) finish and Slide Channel Door closer with (as per EN 1154) andsaddle plate for fixing on the Glass door and necessary seals to beprovided all around the door frames. In case of Glass over panel AlexaOHP-DP45 Over Panel Door profile to be used. The profiles shall besuitable for Glass thickness of 10/12/13.52mm.The Profile shall be mattnatural anodized, the Profile Manufacturer to supply all the necessaryclips, seals and fixing accessories for the system. |
| 4 | Supplying, Installation, Testing and Commissioning of 13 passenger(884 Kg) machine room less lift having contract speed of1.00 MPS serving different floors in the lift shaft and havingbarrier free requirements as per Appendix-VII of CPWD GeneralSpecifications for Electrical Works (Part-III-Lifts and Escalators), 2003 and as per detailed specifications enclosed as under :-Speed - 1.00 MPSFloors to be served - 8Travel - 30 Meters ( approx.)Stops and Opening - Five ( ,B plus S plus 6 ) on same sideMachine: Gearless machine with permanent magnet synchronous motor.Controller - Modular control microprocessorsystem combined withvariable frequency and variable voltage system which can be located in door column at the top floorControl - Variable frequency with closed loop vector control.Operation - Automatic, microprocessor based, duplex collectiveselective with / without attendant |
| 5 | Provision for providing and fixing water supply connection From 300mm Existing water supply pipe line complete in all respects(detail attach).. |
| 6 | Providing and fixing Concertina coil 0.75mm expension ofcase 7m/coil with high tensile spring steel size 2.50mm diaincluding M.S angle nut and bolt and carriage ,loading and uploading in all respect. |
| 7 | Providing and fixing alphabet on existing steel surface on maingate. Complete in all respect as per satisfaction of engineer incharge. |
| 8 | Providing and fixing Drinking Water cooler 100-Ltr.capicity 2..nos. outlet push Toti provision with 60-LPH per hour R.O. complete in all respect as per satisfaction of engineer in charge. |
| 9 | Providing and fixing Self Priming Monoblock Pump 1HP make Crompton set complete work given Head 6-45meters, Discharge 57-13 LPM. complete in all respect as per satisfaction of engineer in charge |
| 10 | Supply, Erection,testing and commissioning of Puffin 18WWhite Round Bright LED Panel Light Ceiling DownlightLamp Kit with LED Driver Surface Mount LED CeilingLight (Pack of 1)(2 Year Warranty. complete in all respectas per satisfaction of engineer in charge. Make:-Philips,Bajaj,GE,Wipro,K-lite,crompton greaves |
| 11 | Supply, Installation, testing and commissioning s of 2.0 tonneBEE rated 3 star inverter type cassette AC Complete withindoor and outdoor unit alongwithy drainage,, seamlessheavu duty Cupper piping with thermal insulation , suctionpipe , refrigerant gas ,, with all accessories like remore control, cabling etc. in all respect. |
| 12 | Supply, Installation, testing and commissioning s of 1.5 tonneBEE rated 3 star inverter type high wall split unit ACComplete with indoor and outdoor unit alongwithydrainage,, seamless heavu duty Cupper piping with thermalinsulation , suction pipe , refrigerant gas ,, with allaccessories like remore control, cabling etc. in all respect. |
| 13 | Supply, Installation, Testing and Commissioning ofCat 6, Information Outlet, UL Listed, ColorBlue/grey/white/other (I/O) for Data, Voice, CCTV andWi-Fi on the existing modular plate and switchbox including connections but excluding modularplate etc. as required{1 Year Warranty. }Approved Makes : Posiflex / Digisol / Norden(for user end). Exclude GST |
| 14 | Supply installation Testing and commissioning of L2Switch 10/100/1000 24 port POE plus (390W) Switch with2 dedicated 10G SFP plus ports plus 2 dedicated 1G SFPports{1 Year Warranty. }Approved Makes : Cudy 24 Gigabit /Ubiquiti /HikvisionExclude GST |
| 15 | Supply ,Installation ,Testing and Comissioning of Cat6UTP 24-26 AWG Patch Cord - 1mtr with crossseparator,Manufactured from starnded wires for flex life,Minimum length 1m, LSZH (Low Smoke ZeroHalogen) standards like IEC 60332-1{1 Year Warranty. }Approved Makes : Cudy 24 Gigabit /Ubiquiti /HikvisionExclude GST |
| 16 | Supply ,Installation ,Testing and Comissioning of Cat6UTP 24-26 AWG Patch Cord - 2mtr with crossseparator,Manufactured from starnded wires for flex life,Minimum length 1m, LSZH (Low Smoke ZeroHalogen) standards like IEC 60332-1{1 Year Warranty. }Approved Makes : Posiflex / Digisol / NordenExclude GST |
| 17 | Supply, Installation, Testing and Commissioning of 3MP Dome Camera, ONVIF profile S and G, UL, CE, FCC Certified, 1/2.8` CMOS sensor, 3.6 mm fixedfocal, triple stream, Min Illumination: 0.01 Lux @(F1.2, AGC ON), 0.028 Lux @(F2.0, AGC ON), 0 Luxwith IR, Shutter Speed : 1/5 ? 1/100, 000 s, Edgeanalytics: line crossing, perimeter intrusion, stationaryobject, Video Compression: H.265, H.264, frame rate30 fps @ 3MP, Edge analytics: line crossing, perimeter intrusion, Face detection, cross counting, stationary object, In built IR LED, IR distance upto 30mtrs, IP 66, POE. {1 Year Warranty. }Approved Makes :Allgovision/ Impulse / Norden /Pelco/ AxisExclude GST |
| 18 | Supply, Installation, Testing and Commissioning of 3MP Bullet Camera, ONVIF profile S and G, UL, CE, FCC Certified, 1/2.8` CMOS sensor, 3.6mm fixedfocal, triple stream, Min Illumination: 0.05 Lux @(F1.2, AGC ON), 0 Lux with IR, Shutter Speed: 1/5 ? 1/100,000 s, Video Compression: H.265, H.264, 120dB WDR, frame rate 30 fps @ 3MP, Edge analytics:lcinroesscrcoosusnintign,g,psetaritmioentaerryionbtrjuescito, nIn, bFuaiclteIRdeLtEeDct,ioInR, distance upto 30 mtrs, IP 66, POE. {1 Year Warranty. }Approved Makes :Allgovision/ Impulse / Norden /Pelco/ AxisExclude GST |
| 19 | Supply, Installation, Testing and Commissioning ofONVIF profile S and G, UL certified 128 Channel NVR, 4 SATA ports, each SATA capacity of upto 8 TB, Recording Bandwidth 320 Mbps, 1xHDMI, 1xVGA, Alarm: 16ch in/ 1ch out, 1xRJ45 port, 1x3.0 USB forbackup/ upgrade, 2x 2.0 USB for mouse, SmartPhone support: iOS, Android. {1 Year Warranty. }Approved Makes: Allgovision/ Impulse/ Norden/Pelco/ AxisExclude GST |
| 20 | Supply, Installation, Testing and Commissioning of6TB Surviellance Hard Disk. {1 Year Warranty. }Approved Makes: WD /segate /Toshiba/HPExclude GST |
| 21 | Supply, Installation, Testing and Commissioning of3MP IR IP H.265 High Speed PTZ dome camera with30X Optical zoom, Accurate and fast focusing, WDR, Micro SD card slot, Smart analytics and 200M IRsupport,Intrusion detection, Cross line detection,AutoTracking,Compatibility ONVIF (Profile S,G), API. {1 Year Warranty. }Approved Makes: WD /segate /Toshiba/HPExclude GST |
| 22 | Flat Screen HD led (24X7) with Interfaces includeHDMI, DVI, D-sub, Component and Composite inputas well as RS-232C and RJ45 for extensiveconnectivity, remote control and wall mount unit /floor stand complete with making connections etccomplete as reqd. {1 Year Warranty. }Approved Make:- LG / Samsung / PanasonicExclude GST |
| 23 | Supply, Installation, Testing and Commisioning ofClient workstation Processor intel i7, 13th Gen, 4ghzor higher, OS geniune Window 11, Color Monitor 22`, RAM 8GB DDR3 SDRAM, MEMORY 1TB HDD, 2GBGRAPHIC CARD complete as required{1 Year Warranty. }Approved Makes: Lenovo /Toshiba/HPExclude GST |
| 24 | Office Table 3 21100.00 63300.00 Manufacturing and Supplying Office Executivetable with Keybord Tray Saptashrungi. GSTExcluding. |
| 25 | Executive Chair 3 19500.00 58500.00Manufacturing and Supplying of Executive Chair Revolving Chair with Synchronic tiltMechanismGST Excluding |
| 26 | Visitor Chairs 215 1980.00 425700.00Manufacturing and Supplying of R.L.GFurniture Cantilever Office Chair Non- revolving and non-tilting Chair with armrestR.L.G Garg Furniture( made by-R.L.G )GST Excluding |
| 27 | Library Chair 215 3009.00 646935.00 Manufacturing and Supplying of library chair Heavy crome polishGST Excluding |
| 28 | Library Counter Manufacturing and Supplying and fixing LibraryReception Table wooden size 8`X4` round shape Heavy dutyGST Excluding |
| 29 | Mid Back Chair 40.00 2055.00 82200.00Manufacturing and Supplying R.L.G Furniture Revolving Chair with Knee tilt mechanismR.L.G Garg Furniture( made by-R.L.G ) GST Excluding |
| 30 | Manufacturing and Supplying UnbrandedThree Seater Tubular Steel Sofa Set made of SS202 Round PipeDiameter 25mm X 1.6 mm ThickChrome Plated. GST Excluding |
| 31 | Manufacturing and Supplying of R.L.GFurniture Computer table with additional unitR.L.G Garg Furniture( made by-R.L.G )GST Excluding |
| 32 | Manufacturing and Supplying of Godrej Interio Type of Shelving Cabinates Large godrejInterio(Godrej Interio Storwel Plain Welded)GST Excluding |
| 33 | Supply, Installation, Testing and Commissioningof 55` Flat Screen HD led (24X7) with Interfacesinclude HDMI, DVI, D-sub, Component andComposite input as well as RS-232C and RJ45for extensive connectivity, remote control and wall mount unit / floor stand complete with making connections etc complete as reqd. {1 Year Warranty. }Approved Make:- LG / Samsung / Panasonic Exclude GST |
| 34 | Supply, Installation, Testing and Commissioningof refrigerator 250L complete with makingconnections etc complete as reqd. {1 Year Warranty. }Approved Make:- LG |
| 35 | Manufacturing and Supplying of Double Bed wooden with Head RestGST Excluding |
| 36 | Manufacturing and Supplying of AuditoriumChair auto seat tip up with push back (made by- HazelWood Furniture)GST Excluding |
| 37 | COMPUTERProviding and Fixing of HP Intel Core i5 All in One PC with 23.8 inch Display/Windows 11Home GST Excluding |
| 38 | NA Single Seater TUBULAR STEEL SOFASET made of MS ERW Tube Of Diameter 31.8Mm x 2 Mm Thick Chrome PlatedGST Excluding |
| 39 | Manufacturing and Supplying of Center Table wooden with mirror size 4`X2` GST Excluding.. |
| 40 | Supplying and Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessoriesand providing masonary enclosure with cover plate having locking arrangement and wateringpipe etc, with charcoal/ coke and salt as required. |
| 41 | Supplying and laying 25 mm x 5 mm. G.I. strip in 40 mm dia. G.I. Pipe from earth electrode,including connection with GI nut, bolt, spring, washer excavation and re-filling etc as required. |
| 42 | Providing and fixing 25mm x 5mm G.I. strip on surface or in recess for connections etc. asrequired. |
| 43 | Providing and Fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing alongwithexisting surface/ recessed conduit/ submain wiring/ cable as required... |
| 44 | Supplying, fabricating and installing following size of perforated painted with powder coating M.S. cable trays,with perforation not more than 17.5%, in covenient section, joined with connectors, suspended from the ceiling with MS suspenders including bolts and nuts, painting suspenders etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness |
| 45 | Supplying, fabricating and installing following size of perforated painted with powder coating M.S. cable trays,with perforation not more than 17.5%, in covenient section, joined with connectors, suspended from the ceiling with MS suspenders including bolts and nuts, painting suspenders etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness |
| 46 | Laying and fixing of One number PVC Insulated and PVC Sheathed/XLPE power cable of 1.1 kVgrade of folloing size on wall surface as required.Laying and fixing of One number PVC Insulated and PVC Sheathed/XLPE power cable of 1.1 kVgrade of size not exceeding 35 sqmm on surface as required. |
| 47 | Aboved 95 sq mm and upto 185 sq mm (clamed with 25x3mm MS flat clam). |
| 48 | Supplying of all materials and making terminations of 1.1 KV grade aluminium multicore cablesof the following sizes. The work includes cable glanding using brass plated double compressionglands, sizing the core leads, removing insulation, fixing suitable crimping type copper lugs/thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads andneatly connecting the same to the equipment terminals.3.5 Core 120 sq. mm. Armoured Aluminium cable. |
| 49 | Supplying of all materials and making terminations of 1.1 KV grade aluminium multicore cablesof the following sizes. The work includes cable glanding using brass plated double compressionglands, sizing the core leads, removing insulation, fixing suitable crimping type copper lugs/thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads andneatly connecting the same to the equipment terminals.3.5 Core 35 sq. mm. Armoured Aluminium cable. |
| 50 | Supplying of all materials and making terminations of 1.1 KV grade aluminium multicore cablesof the following sizes. The work includes cable glanding using brass plated double compressionglands, sizing the core leads, removing insulation, fixing suitable crimping type copper lugs/thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads andneatly connecting the same to the equipment terminals.4 Core 16 sq. mm. Armoured Aluminium cable. |
| 51 | Control Cabling (PVC insulated and PVC sheathed, armoured, Copper Conductor of 1.1 KVgrade on existing cable trays).5C x 1.5 Sq. mm |
| 52 | Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable forautomatic operation and consisting of following, complete in all respects, as required :Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impellerwith stainless steel shaft, mechanical seal conforming to IS 1520. bSuitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable foroperation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontalfoot mounted type with Class-`F` insulation, conforming to IS-325. c M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. d Suitable cement concrete foundation duly plastered with anti vibration pads.1620 lpm at 56 m Head |
| 53 | Supplying, installation, testing and commissioning of diesel engine driven main fire pumpsuitable for automatic operation and consisting of following, complete in all respects, as required: (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller withstainless steel shaft, mechanical seal conforming to IS 1520Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant ISstandard complete with auto starting mechanism, 12 /24 volts electric starting equipment, dieseltank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thickglass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments andprotection as per standard specification, stop solenoid for auto stop in the event of fault withaudio indications, painted with post office red colour etc. as requiredM.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads.1620 lpm at 56 m Head |
| 54 | Supplying, installation, testing and commissioning of electric driven pressurisation pump suitablefor automatic operation and consisting of following, complete in all respects, as required :(Jockey Pump)Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainlesssteel shaft, mechanical seal conforming to IS : 1520.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type withClass-`F` insulation, conforming to IS : 325.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type withClass-`F` insulation, conforming to IS : 325.M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 55 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable forautomatic operation and consisting of following, complete in all respects, as required: (TerracePump)Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impellerwith stainless steel shaft, mechanical confirming to IS : 1520Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mountedtype with Class-`F` insulation, conforming to IS-325.M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as requiredSuitable cement concrete foundation duly plastered and with anti vibration pads. |
| 56 | Fabrication, supply, Insallation testing and commissioning of Electrical control panel of cubicalconstruction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalisedwith hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7tank treatment process, cable alley, interconnection with suitable size copper conductorcable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump and diesel pump set complete as per CPWD specification with following incoming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosureprotection class IP 42 as required :Incomings400A, 50kA 4 Pole MCCB, Ics=100% Icu ratingDigital Voltmeter 0-500V with selector switchAmmeter (0-400 A) with selector swtich and CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lampsSet of Copper Bus Bar 500AOutgoings( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, andLED type ON, OFF, trip indicating lamps)Main Fire Pump200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hppump with overload protection, current sensing type single phase preventor complete with allacceessories and internal wiring required for automatic operation, selector switch forlocal/remote, auto/manual/OFF operation. Jocky Pump100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter withoverload protection, current sensing type single phase preventor complete with all acceessoriesand internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Diesel Engine ControlControl for diesel engine comprising - Automatic/Manual selctor switch and 3 attempt starting device, timers and relays as required, pushbuttons, start/stop in manual modeIndicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indicationBattery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC voltmeter, and 0-20 A DC AmmeterAll standard relays and accessories for automatic operation of diesel engineSystem ControllerDesigning, Supply, Installation, Testing and commissioning of system controller to controloperation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump insequence as per specification consisting of relays, timers. Sensors, annunciation window forfault indication, complete as per specifications |
| 57 | Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in groundincluding welding, excavation and providing cement concrete blocks as supports, anticorrosivetreatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizescomplete as required.150 mm. Dia |
| 58 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :25 mm Dia |
| 59 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :32 mm dia |
| 60 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :40 mm dia |
| 61 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :50 mm dia |
| 62 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :65 mm dia |
| 63 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :80 mm dia |
| 64 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :100 mm dia |
| 65 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :150 mm dia |
| 66 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required : 200 mm dia |
| 67 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :250 mm dia |
| 68 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :300 mm dia |
| 69 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/StainlessSteel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A)with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal |
| 70 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm diainstantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal |
| 71 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating withbronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conformingto IS 13095 of following sizes as required :80 mm dia |
| 72 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating withbronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conformingto IS 13095 of following sizes as required :150 mm dia |
| 73 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating withbronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conformingto IS 13095 of following sizes as required :200 mm dia |
| 74 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating withbronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conformingto IS 13095 of following sizes as required :250 mm dia |
| 75 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating withbronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conformingto IS 13095 of following sizes as required :300 mm dia |
| 76 | Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 withnon rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :150 mm dia |
| 77 | Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 withnon rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :200 mm dia |
| 78 | Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 withnon rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :250 mm dia |
| 79 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orificeof required size to be fitted between flange and landing valve of external and internal hydrants toreduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 80 | Providing, installation, testing and commissioning of non-return valve of following sizesconfirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100 mm dia |
| 81 | Providing, installation, testing and commissioning of non-return valve of following sizesconfirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150 mm dia |
| 82 | Providing, installation, testing and commissioning of non-return valve of following sizesconfirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :250 mm dia |
| 83 | Providing, installation, testing and commissioning of non-return valve of following sizesconfirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :300 mm dia |
| 84 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.100 mm dia |
| 85 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.150 mm dia |
| 86 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.200 mm dia |
| 87 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.250 mm dia |
| 88 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.300 mm dia |
| 89 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and femalecouplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Gun Metal |
| 90 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:1258520 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket.30 m |
| 91 | Supplying and fixing of fire brigade connection of cast iron body with gun metal maleinstantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipeconnection conforming to IS 904 as required :4 way-150 mm dia M.S. Pipe |
| 92 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in heightwith air release valve on top and flanged connection to riser, drain arrangement with 25 mm diagun metal heel valve with required accessories, pressure gauge and paintingwith syntheticenamel paint of approved shade as required. |
| 93 | Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating68 degree centigrade with required accessories :Pendent Sprinkler |
| 94 | Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating68 degree centigrade with required accessories :upright sprinkler |
| 95 | Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating68 degree centigrade with required accessories :Horizontal Sprinkler |
| 96 | Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating68 degree centigrade with required accessories :Concealed sprinkler.. |
| 97 | Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 98 | Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required.100 mm dia |
| 99 | Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required.150 mm dia |
| 100 | Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper armand hyd raulically driven mechanical gong bell to sound continuous alarm when the wetriser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressureswitch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipeof required size, flanges, orifice plate, gasket etc of follwing sizes as required :80 mm dia |
| 101 | Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper armand hyd raulically driven mechanical gong bell to sound continuous alarm when the wetriser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressureswitch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipeof required size, flanges, orifice plate, gasket etc of follwing sizes as required :100 mm dia |
| 102 | Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper armand hyd raulically driven mechanical gong bell to sound continuous alarm when the wetriser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressureswitch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipeof required size, flanges, orifice plate, gasket etc of follwing sizes as required :150 mm dia |
| 103 | Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainlesssteel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI testpressure of875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mmNPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of followingsizes complete as required.100 mm dia |
| 104 | Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainlesssteel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI testpressure of875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mmNPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of followingsizes complete as required.150 mm dia |
| 105 | Providing, installation, testing and commissioning of adjustable rosette plate for 15mm dia in whitefinish UL Listed or FM approved complete as required. Each 20.00 264.00 5,280.00Total Carried to DSR Items 9,238,073.00Non DSR itemsFire Extingushers1.0Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindricalbody, internal discharge tube, discharge nozzle, suspension bracket, conforming to IS 2878,finished externally with red enamel paint and fixed to wall with brackets complete with internalcharges. Capacity 4.5 kg |
| 106 | Providing and Fixing of stored pressure Fire Extinguisher ABC powder type (Mono AmmoniumPhosphate Powder) Magnetic Pressure Gauge having the facility to check at site, DischargeTime less than 9 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 21A, B Rating 55B as per BSEN-3 BIS 15683 marked, Can Construction : Deep drawn and CO2 Mig welded, ValveConstruction : Forging and Machining, Internal Coating of Can : Epoxy Powder coating, ExternalCoating ofCan : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, HeliumLeakDetection TCapacity 6kg |
| 107 | Providing and fixing mechanical foam type Trolley Mounted Fire Extinguisher of bearing toIS:10568/IS13385/IS13386 with disCapacity 50 Lit. |
| 108 | Providing and fixing Carbon Dioxide Type Trolley Mounted Fire Extinguisher of as per IS: 2878with discharge time of 10 to 20 sec/15 to 36sec/20 to 60sec respectively. 22.5 Kg. CO2 Fire Extinguisher |
| 109 | Providing and fixing Carbon Dioxide Type Trolley Mounted Fire Extinguisher of as per IS: 2878with discharge time of 10 to 20 sec/15 to 36sec/20 to 60sec respectively. 22.5 Kg. CO2 Fire Extinguisher.. |
| 110 | Supplying, testing and commissioning of 1100 volt grade XLPE insulated, PVC sheathed, aluminium conductor, armoured cable laid on existing cable trays / walls including the cost ofsaddling and clAmping and including the cost of dressing to ensure minimum 1 cable diameterspacing between adjacent cables etc. complete as per specifications, as required and as below.3½ X 120 sq. mm |
| 111 | Supplying, testing and commissioning of 1100 volt grade XLPE insulated, PVC sheathed, aluminium conductor, armoured cable laid on existing cable trays / walls including the cost ofsaddling and clAmping and including the cost of dressing to ensure minimum 1 cable diameterspacing between adjacent cables etc. complete as per specifications, as required and as below.3½ X 35 sq. mm |
| 112 | Supplying, testing and commissioning of 1100 volt grade XLPE insulated, PVC sheathed, aluminium conductor, armoured cable laid on existing cable trays / walls including the cost ofsaddling and clAmping and including the cost of dressing to ensure minimum 1 cable diameterspacing between adjacent cables etc. complete as per specifications, as required and as below.4 X 16 sq. mm |
| 113 | Supplying, testing and commissioning of 1100 volt grade XLPE insulated, PVC sheathed, aluminium conductor, armoured cable laid on existing cable trays / walls including the cost ofsaddling and clAmping and including the cost of dressing to ensure minimum 1 cable diameterspacing between adjacent cables etc. complete as per specifications, as required and as below.Supplyinf and fixing fire axe |
| 114 | Providing and fixing in position the industrial type Pressure Gauges with gun metal / brassvalves complete as required |
| 115 | Supplying, installation, testing and commissioning of electric driven pressurisation pump suitablefor automatic operation and consisting of following, complete in all respects, as required :(Jockey Pump)Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainlesssteel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type withClass-`F` insulation, conforming to IS : 325. |
| 116 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia |
| 117 | Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 100 mm dia |
| 118 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 200 mm dia |
| 119 | Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diametersize nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipecoupling as required :Gun Meta... |
| 120 | Providing, installation, testing and commissioning of adjustable rosette plate for 15mm dia in whitefinish UL Listed or FM approved complete as required. |
| 121 | ESTIMATE FOR CONSTRUCTION OF DR. MANGAL SEN MEMORIAL BHAWAN (CIVIL WORK, PLUMBING WORK and ELECTRICAL WORK) IN ONE ACRE LAND AT ROHTAK UNDER MUNICIPAL CORPORATION ROHTAK (Est. Cost. Rs. 1731.01 Lakh) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender