Tender For Repair / Maintenance Of Old Unsv Ci / Gi / Ms Pipe, Header, Addition / Alteration Of Pipe Line, Sluice Valve / Gate Valve, Valve Pit Chamber, Level Indicator, Aviation Light And Repair To Lt Panel Alongwith Connected Works At 39 Wing Af St
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Oct 2026
10 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Old Unsv Ci / Gi / Ms Pipe, Header, Addition / Alteration Of Pipe Line, Sluice Valve / Gate Valve, Valve Pit Chamber, Level Indicator, Aviation Light And Repair To Lt Panel Alongwith Connected Works At 39 Wing Af Station Udh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Taking up CI/GI/MS/Clamp/DI /ERW MS water tubing any type of dia 200mm including all fittings and connection from trenches/wall/ceiling/floor etc for removal from site. |
| 2 | Taking up CI/GI/MS/Clamp/DI /ERW /MS water tubing any type of dia 150 mm including all fittings and connection from trenches/wall/ceiling/floor etc for removal from site. |
| 3 | Taking up CI/GI/MS/Clamp water tubing any type of dia 100/80 mm dia any size including all fittings and connection from trenches/wall/ceiling/floor etc for removal from site. |
| 4 | Taking up CI/GI/MS/Clamp/DI /ERW /MS water tubing any type of dia 50 - 40 mm including all fittings and connection from trenches/wall/ceiling/floor etc for removal from site. |
| 5 | Taking up CI/GI/MS/Clamp/DI /ERW /MS water tubing any type of dia 25 mm including all fittings and connection from trenches/wall/ceiling/floor etc for removal from site. |
| 6 | Taking up CI/GI/MS/Clamp/DI /ERW /MS water tubing any type of dia 20 - 15 mm including all fittings and connection from trenches/wall/ceiling/floor etc for removal from site. |
| 7 | Supply and laying ERW MS water tubing for fire hydrant system 200 mm bore and 6 to 6.13mm thickness and , medium grade galvanized with all fittings (such as tee, elbow, flanged, long socket, union, short pieces including welding) and fixed to wall or ceiling or laid in floor,duct and trenches including welding, making bushbar as required any size, any type tubing and connections etc complete all as specified and directed by Engr-in-Charge of Make : Surya Prakash / Jindal / TATA. Note: - Rate quoted includes road cutting / wall floor and making good damaged portion matching with existing surface with all existing finishes. |
| 8 | Supply and Laying in repair DI pipe, 150 mm bore water mains with socket ends, centrifugally cast of class K-9, including all necessary acessories required for laying of pipes etc ncluding welding, making bushbar as required complete all as specified and directed by Engr-in-Charge. (Note - DI specials / fitting Excavation, earth work shall be measured and paid separately). Make : Electro Steel /Jindal/ Tata/ Rashmi Metallics\\" |
| 9 | Supply and laying double side flange GI water tubing for water supply system 80 mm bore, double side flange, medium grade galvanized with all fittings (such as tee, elbow, flanged, long socket, union, short pieces) and fixed to wall or ceiling or laid in floor,duct and trenches including welding, making bushbar as required iany size, any type ( PPR / GI / CI / Clamp pipe ) tubing and connections etc complete all as specified and directed by Engr-in-Charge of Make : Surya Prakash / Jindal / TATA . Note: - Rate quoted includes road cutting / wall floor and making good damaged portion matching with existing surface with all existing finishes. |
| 10 | Supply and laying GI water tubing for water supply system 100 mm bore, medium grade galvanized with all fittings (such as tee, elbow, flanged, long socket, union, short pieces) and fixed to wall or ceiling or laid in floor,duct and trenches including welding, making bushbar as required i any size, any type tubing and connections etc complete all as specified and directed by Engr-in-Charge of Make : Surya Prakash / Jindal / TATA. Note: - Rate quoted includes road cutting / wall floor and making good damaged portion matching with existing surface with all existing finishes. |
| 11 | All as per item No 10 but 50 mm bore |
| 12 | All as per item No 10 but 40 mm bore |
| 13 | All as per item No 10 but 25 mm bore |
| 14 | All as per item No 10 but 20 mm bore |
| 15 | All as per item No 10 but 15 mm bore |
| 16 | Excavation, in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for laying GI pipe line in hard / dense soil and getting out complete all as specified. |
| 17 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick complete all as specified. |
| 18 | Removal of surplus excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified. |
| 19 | Supply & Fixing GI reducing socket 25mm dia x 15mm dia complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 20 | Supply & Fixing GI reducing socket 20 mm dia x 15 mm dia complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 21 | Supply & Fixing GI reducing socket40 mm dia x 25 mm dia complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 22 | Supply & Fixing GI reducing socket50mm dia x 25 mm dia complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 23 | Supply & Fixing GI reducing socket25 mm dia x 20 mm dia complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 24 | Supply & Fixing GI reducing socket40 mm dia x 20 mm dia complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 25 | Supply & Fixing GI reducing socket50 mm dia x 20 mm dia complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 26 | S & F GI Nipple of Size 20 mm dia 6\\" long complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 27 | S & F GI Nipple of Size 25 mm dia 6\\" long complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 28 | S & F GI Nipple of Size 15 mm dia 6\\" long complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 29 | S & F GI Nipple of Size 20 mm dia 4\\" long complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 30 | S & F GI Union of Size 25 mm complete set etc complete all as specified and directed by Engr-in -Charge. |
| 31 | S & F GI Union of Size 20 mm complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 32 | S & F GI Union of Size 15 mm complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 33 | S & F GI Socket of Size 25 mm complete set , etc complete all as specified and directed by Engr-in -Charge. |
| 34 | S & F GI Socket of Size 20 mm complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 35 | S & F GI Elbow of Size 20 mm complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 36 | S & F GI Elbow of Size 25 mm complete set, etc complete all as specified and directed by Engr-in -Charge. |
| 37 | S & F GI Tee of Size 20 mm complete set , etc complete all as specified and directed by Engr-in -Charge. |
| 38 | S & F GI Tee of Size 25 mm complete set , etc complete all as specified and directed by Engr-in -Charge. |
| 39 | S & F GI union of Size 50 mm complete setall as specified and directed by Engineer-in -Charge. |
| 40 | S & F GI union of Size 80 mm complete set all as specified and directed by Engineer-in -Charge. |
| 41 | S & F GI Nipple of Size 50 mm complete setall as specified and directed by Engineer-in -Charge. |
| 42 | S & F GI Nipple of Size 80 mm complete setall as specified and directed by Engineer-in -Charge. |
| 43 | Supply and Fix tank nipple for plumber work 25 mm dia complete all as specified. |
| 44 | Supply and Fix tank nipple for plumber work 20 mm dia complete all as specified. |
| 45 | Supply and Fix tank nipple for plumber work 15 mm dia complete all as specified. |
| 46 | Suppy only plug /dead end15 mm dia complete all are specified and directed by Engr-in-Charge. |
| 47 | Suppy only plug /dead end20 mm dia complete all are specified and directed by Engr-in-Charge. |
| 48 | Suppy only plug /dead end 25 mm dia complete all are specified and directed by Engr-in-Charge. |
| 49 | Suppy only plug /dead end 40 mm dia complete all are specified and directed by Engr-in-Charge. |
| 50 | Suppy only plug /dead end 50 mm dia complete all are specified and directed by Engr-in-Charge. |
| 51 | Suppy only plug /dead end 80 mm dia complete all are specified and directed by Engr-in-Charge. |
| 52 | S & F in repair gun metal gate valve 15 mm dia, inner thread suitable for easy fixing on GI Pipe complete all as specified and directed by Engr-in-Charge. Make- Leader/BVI/BIR. |
| 53 | S & F in repair gun metal gate valve 20 mm dia, inner thread suitable for easy fixing on GI Pipe complete all as specified and directed by Engr-in-Charge. |
| 54 | S & F in repair gun metal gate valve 25 mm dia, inner thread suitable for easy fixing on GI Pipe complete all as specified and directed by Engr-in-Charge. |
| 55 | S & F in repair gun metal gate valve 40 mm dia, inner thread suitable for easy fixing on GI Pipe complete all as specified and directed by Engr-in-Charge. |
| 56 | S & F in repair gun metal gate valve 50 mm dia, inner thread suitable for easy fixing on GI Pipe complete all as specified and directed by Engr-in-Charge. |
| 57 | S & F in repair gun metal gate valve 80 mm dia, inner thread suitable for easy fixing on GI Pipe complete all as specified and directed by Engr-in-Charge.Make- Leader/BVI/BIR. |
| 58 | S & F float valve in replacement of PVC float valve / ball valve high pressure with polythene float and fly nut 15 mm dia complete all as specified by Engr-in Charge. Make- Prayag/ Polytuf/ Shakti/ Supreme pearl/ Wilson. |
| 59 | S & F float valve in replacement of PVC float valve / ball valve high pressure with polythene float and fly nut 20 mm dia complete all as specified by Engr-in Charge. |
| 60 | S & F float valve in replacement of PVC float valve / ball valve high pressure with polythene float and fly nut 25 mm dia complete all as specified by Engr-in Charge. |
| 61 | For Raw Water : water Bacteriological Test for use of Drinking Water , Total Coliform, Feacal Coliform, E.Coli (Escherichia Coli), Salmonella, Shigella, Pseudomonas aeruginosa etc, complete all as specified and directed by Engr in charge. (Note : Sample collection cans and bottles & transportation charges from AF Stn Udhampur to testing lab in Jammu are including in quotated rate and testing to be done from : CSIR- Indian Institute of Integrated Medicine Jammu). |
| 62 | For Raw Water : water Chemical Test for use of Drinking Water , pH, Turbidity, TDS, Total Hardness, Total Alkalinity, Chloride, Sulphate, Fluoride, Iron, Arsenic. etc, complete all as specified and directed by Engr in charge. (Note : Sample collection cans and bottles & transportation charges from AF Stn Udhampur to testing lab in Jammu are including in quotated rate & NABL Approved Laboratory Like : CSIR- Indian Institute of Integrated Medicine Jammu). |
| 63 | For Treated Water : water Bacteriological Test for use of Drinking Water , Total Coliform, Feacal Coliform, E.Coli(Escherichia Coli), Salmonella, Shigella, Pseudomonas aeruginosa etc, complete all as specified and directed by Engr in charge. (Note : Sample collection cans and bottles & transportation charges from AF Stn Udhampur to testing lab in Jammu are including in quotated rate & NABL Approved Laboratory Like : CSIR- Indian Institute of Integrated Medicine Jammu). |
| 64 | For Treated Water : water Chemical Test for use of Drinking Water , pH, Turbidity, TDS, Total Hardness, Total Alkalinity, Chloride, Sulphate, Fluoride, Iron, Arsenic. etc, complete all as specified and directed by Engr in charge. (Note : Sample collection cans and bottles & transportation charges from AF Stn Udhampur to testing lab in Jammu are including in quotated rate & NABL Approved Laboratory Like : CSIR- Indian Institute of Integrated Medicine Jammu). |
| 65 | M&L for Painting of outer body of RCC Under Ground Sump any capacity 25,000.00/50000 Gallons any size by adopting following method :-(a) After cleaning of rubbing with wire brushes on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete outside of the tank and applying two coats of cement base paint/ Distemper making it absolutely germ free complete all as specified and directed by Engr-in-Charge. |
| 66 | Supply and fixing Swimming pool light fittings B4x C0457 12, IP -68, watts(Blue rays) on the swimming pool walls LED swimming pool lights are energy-efficient, long-lasting underwater lights that enhance pool aesthetics and safety. They are available in various colors, including RGB (Red, Green, Blue) options, which allow for changing light shows. Benefits include significantly lower energy consumption compared to older technologies, reduced heat generation, and a long lifespan, which lowers maintenance costs and hassle.complete all as specified and directed by Engr-in-Charge. |
| 67 | Supply and fix in repairs suction sweeper made up of stainless steel metal of 10 X 37 inch and 0.5 mm thickness fitted with hard brush along length dimension with necessary fittings like spring, flexible wiper of minimum 10mm thickness along with provision for fixing flexible hose, rotating wheel etc all as specified and directed by Engr-in-charge |
| 68 | Supply and fix in repairs Deep Leaf Net Skimmer net of size 16\\" X 19\\" with 20 feet long, light weight , extendable rod, all as specified and directed by Engr-in-charge |
| 69 | Supply & Fixing Nylon Rope 10 Sqmm dia for suction Swiper for swimming pool all as specified and directed by Engr-in-charge |
| 70 | Supply only Swimming Pool Brush for Cleaning Pool Walls,Tiles & Floors,Heavy Duty 18\\" Aluminum Stainless Steel Wire Bristle Pool Scrub Brush for Curved Cleaning Brushes with EZ Clips complete all are specified and directed by Engr-in-Charge. |
| 71 | Supply & Fixing PVC Cover for Light Pocket as sample, size as per site for protection of floor/wall complete all are specified and directed by Engr-in-Charge. |
| 72 | S&F flexible copper cable 2.5 sqmm 3 core size for connecting with suction swiper motor and suction sweeper wherever required complete all as specified and directed by Engr-in-charge. Make: KEI/ Havells/ Finolex. |
| 73 | S&F flexible copper cable 4 sqmm 3 core size for connecting with suction sweeper motor and suction sweeper wherever required complete all as specified and directed by Engr-in-charge |
| 74 | Supply only Poly Aluminium Chloride (PAC)inorganic soluble polymer raw water flocculants powder in 25 Kg bags conforming to the following specifications: -(a) Bulk Density/specific Gravity at 20 Degree Celcius: 0.75 + 0.10 (b) PH Value of aqueous solution (w/v): 3.5 – 5.0 (1%)(c) Chloride content (w/w): 31.0% + 2.0%(d) Sulphate content: 10 % (Max)(e) Basicity: 40.0 + 5.0(f) Mercury & Lead: Not desirable complete all are specified and directed by Engr-in-Charge. |
| 75 | Cutting the existing GI / CI / MS/Clamps pipe of 150 mm to 200mm bore and inserting CI /GI / MS Tee of size including all fittings, welding / Lead joints and earthwork complete all are specified and directed by Engr-in-Charge. |
| 76 | Cutting the existing GI / CI / MS/Clamps pipe of 50 mm to 100mm bore and inserting CI /GI / MS Tee of size including all fittings, welding / Lead joints and earthworkcomplete all are specified and directed by Engr-in-Charge. |
| 77 | Supply and Fix in Repair Check Valve Wafer Type (MOC : S.G Iron/MS, Flap : S.G IRON/MS, Gasket : Rubber O Ring ,,End Suitable for Insertion between flanges) of size 200 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or fiber board gasket complete with and including complete fixing accessories like nut, bolt, washers, packing etc complete all are specified and directed by Engr-in-Charge. Make : BVI/TATA/Zindal. |
| 78 | Supply and Fix in Repair Check Valve Wafer Type (MOC : S.G Iron/MS, Flap : S.G IRON/MS, Gasket : Rubber O Ring ,,End Suitable for Insertion between flanges) of size 150 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or fiber board gasket complete with and including complete fixing accessories like nut, bolt, washers, packing etc complete all are specified and directed by Engr-in-Charge. Make : BVI/TATA/Zindal. |
| 79 | Supply and Fix in Repair Check Valve Wafer Type (MOC : S.G Iron/MS, Flap : S.G IRON/MS, Gasket : Rubber O Ring ,,End Suitable for Insertion between flanges) of size 100 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or fiber board gasket complete with and including complete fixing accessories like nut, bolt, washers, packing etc complete all are specified and directed by Engr-in-Charge. Make : BVI/TATA/Zindal. |
| 80 | Supply and Fix in Repair CI reflux valve NRV (non return valve ISI 5312) of size 80 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or fiber board gasket complete with and including complete fixing accessories like nut, bolt, washers, packing etc complete all are specified and directed by Engr-in-Charge. |
| 81 | M & L for Painting of centrifugal / monoblock /Fire Hydrandent pump with motor, foundation, header, sluice valve, and its connected approx 2 to 3 meter Suction and Delivery pipe line including items of pump house cleaning with broom/cloth/duster/amron paper, after that use super enamelled paint over a coat of red oxide primer and two coat of RED/Ocean Blue Paint for Fire Fighting installation and Water Supply Installation respectively complete all as specified and as directed by Engr-in-Charge. Make- BVI/Leader/BIR/Kirloskar. |
| 82 | M & L of run lead joints for spigot and socket CI fittings / pipes incl spurn yarn complete for 100 / 150 mm bore pipes all as specified and as directed. |
| 83 | Supply and Fix in Repair of cast iron sluice valve ISI marked 80 mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780/14846 complete in all respect all as specified. ( Make: Leader / BIR / Zoloto / Kirloskar / Jindal / TATA) |
| 84 | Supply and Fix in Repair of cast iron sluice valve ISI marked 100mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780/14846 complete in all respect all as specified. ( Make: Leader / BIR / Zoloto / Kirloskar / Jindal / TATA) |
| 85 | Supply and Fix in Repair of cast iron sluice valve ISI marked 150mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780/14846 complete in all respect all as specified. ( Make: Leader / BIR / Zoloto / Kirloskar / Jindal / TATA) |
| 86 | Supply and Replacement of 200mm bore Cast iron flanged sluice valve PN 1.6 with stainless steel spindle and CI wheel head with flanged ends, including necessary jointing material such as rubber gasket, bolts, nut & washer of suitable size and welding including testing etc and including taking down old unserviceable complete all as specified and directed. ( Make: Leader / BIR / Zoloto / Kirloskar / Jindal / TATA) |
| 87 | Repair / Rewinding of submersible pump set of cap 0.5 - 1.0 HP single phase 230 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronze impellor as per site requirement complete all as specified and directed by Engr-in-Charge. (Note : Taking down, Transportation, Removing & Rewinding of Copper Conductor as per existing gauge, and reinstallation to the same place expenditure to be deemed with contractor rate.) |
| 88 | Repair / Rewinding of pressure pump set of cap 0.5 - 1 HP any capacity single /3 phase 230 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronze impellor as per site requirement complete all as specified and directed by Engr-in-Charge. (Note : Taking down, Transportation, Removing & Rewinding of Copper Conductor as per existing gauge, and reinstallation to the same place expenditure to be deemed with contractor rate.) |
| 89 | Repair / Rewinding of Monoblock / Centrifugal pump 0.5 HP to 1 HP with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronze impellor as per site requirement. complete all as specified and directed by Engr-in-Charge. (Note : Taking down, Transportation, Removing & Rewinding of Copper Conductor as per existing gauge, and reinstallation to the same place expenditure to be deemed with contractor rate.) |
| 90 | Repair / Rewinding of monoblock ( Fire pump) with motor set of cap 10 HP to 15 HP three phase 415 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronze impellor as per site requirement, complete all as specified and directed by Engr-in-Charge. (Note : Taking down, Transportation, Removing & Rewinding of Copper Conductor as per existing gauge, and reinstallation to the same place expenditure to be deemed with contractor rate.) |
| 91 | Repair / Rewinding of monoblock pump with motor set of capacity 30/40 HP 3 phase 415 volts, with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronze impellor as per site requirement, complete all as specified and directed by Engr-in-Charge. (Note : Taking down, Transportation, Removing & Rewinding of Copper Conductor as per existing gauge, and reinstallation to the same place expenditure to be deemed with contractor rate.) |
| 92 | Repair / Rewinding of Submersible pump with motor set of cap 20 HP 3 phase, 415 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronze impellor as per site requirement, complete all as specified and directed by Engr-in-Charge. (Note : Taking down, Transportation, Removing & Rewinding of Copper Conductor as per existing gauge, and reinstallation to the same place expenditure to be deemed with contractor rate.) |
| 93 | Repair / Rewinding of monoblock pump with motor set of cap 30 HP single phase 230 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronze impellor as per site requirement, complete all as specified and directed by Engr-in-Charge. (Note : Taking down, Transportation, Removing & Rewinding of Copper Conductor as per existing gauge, and reinstallation to the same place expenditure to be deemed with contractor rate.) |
| 94 | Repair / Rewinding of monoblock pump with motor set of cap 40 HP single phase 230 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronze impellor as per site requirement, complete all as specified and directed by Engr-in-Charge.(Note : Taking down, Transportation, Removing & Rewinding of Copper Conductor as per existing gauge, and reinstallation to the same place expenditure to be deemed with contractor rate.) |
| 95 | Repair / Rewinding of monoblock pump with motor set of cap 05 HP to 7.5 HP single phase 230 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronze impellor as per site requirement, complete all as specified and directed by Engr-in-Charge. (Note : Taking down, Transportation, Removing & Rewinding of Copper Conductor as per existing gauge, and reinstallation to the same place expenditure to be deemed with contractor rate.) |
| 96 | Supply and Fix in Repair of Cast iron Butterfly Valve , SS dise with hand lever operated, lining test pressure PN 1.6 ISI marked of size 200mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified. ( Make: Leader / BIR / Zoloto / Kirloskar) |
| 97 | Supply and Fix in Repair of Cast iron Butterfly Valve , SS dise with hand lever operated, lining test pressure PN 1.6 ISI marked of size 150mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified. ( Make: Leader / BIR / Zoloto / Kirloskar) |
| 98 | Supply and Fix in Repair of Cast iron Butterfly Valve , SS dise with hand lever operated, lining test pressure PN 1.6 ISI marked of size 100 mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified. ( Make: Leader / BIR / Zoloto / Kirloskar) |
| 99 | Supply and Fix in Repair of Cast iron Butterfly Valve , SS dise with hand lever operated, lining test pressure PN 1.6 ISI marked of size 80 mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified. ( Make: Leader / BIR / Zoloto / Kirloskar) |
| 100 | Supply and Fix in Repair of Cast iron Butterfly Valve , SS dise with hand lever operated, lining test pressure PN 1.6 ISI marked of size 50 mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified. ( Make: Leader / BIR / Zoloto / Kirloskar) |
| 101 | M&L for dismantling old unserviceable tank in replacement with new Rotational moulded polyethylene water storage tanks of capacity 500 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed.( Make: Sintex / Polycab / Polyvinyl / Vectus / Penguin / Plasto / Victor). |
| 102 | M&L for dismantling old unserviceable tank in replacement with new Rotational moulded polyethylene water storage tanks of capacity 1000 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass/ PVC of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed. ( Make: Sintex / Polycab / Polyvinyl / Vectus / Penguin / Plasto / Victor). |
| 103 | M&L for dismantling old unserviceable tank in replacement with new Rotational moulded polyethylene water storage tanks of capacity 2000 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass/ PVC of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed.( Make: Sintex / Polycab / Polyvinyl / Vectus / Penguin / Plasto /Victor). |
| 104 | Supply and Fix bearing for 30-40 HP motor as per site requirement complete all as specifed and directed. (DE+NDE) |
| 105 | Supply and Fix bearing for 15 HP motor as per site requirement complete all as specifed and directed. (DE+NDE) |
| 106 | Supply and Fix bearing for 7.5-10 HP motor as per site requirement complete all as specifed and directed. (DE+NDE) |
| 107 | Supply and Fix gland douri 6mm dia complete all as specifed and directed. |
| 108 | Supply and Fix gland douri 8mm dia complete all as specifed and directed. |
| 109 | Supply and Fix gland douri 10 mm dia complete all as specifed and directed. |
| 110 | Supply and Fix gland douri 12mm dia complete all as specifed and directed. |
| 111 | Supply and Fix gland 10mm dia complete all as specifed and directed. |
| 112 | Supply and Fix NRV for pressure pump 20-25 mm dia as per site requirement complete all as specifed and directed. |
| 113 | Supply and Fix Relay for pressure pump 0.5-1.0HP as per site requirement complete all as specifed and directed. |
| 114 | Supply and Fix Air drum for pressure pump 0.5 -1.0HP as per site requirement complete all as specifed and directed. |
| 115 | Supply and Fix Gun Metal bush for 30-40HP motor as per sample complete all as specifed and directed. |
| 116 | Supply and Fix Gun Metal bush for 10-20HP motor as per sample complete all as specifed and directed. |
| 117 | Supply and Fix coupling 30-40HP Motor as per site requierment complete all as specified. |
| 118 | Supply and Fix coupling 10-20HP Motor as per site requierment complete all as specified. |
| 119 | Supply and Fix rubber gasket insertion sheet 3 mm thick complete all as specified. |
| 120 | Supply and Fix rubber gasket insertion size 2m x 1 m x 6mm thick used for rubber gasket as required size etc complete all are specified and directed by Engr-in-Charge. |
| 121 | Supply and Fix long bend 50mm dia as per site requirement complete all as specified. |
| 122 | Supply and Fix long bend 80mm dia as per site requirement complete all as specified. |
| 123 | S&F new CI foot valve 200 mm dia flanged pipe with necessary bolts and nuts, washer, welding work all fixing arrangement etc and replacement the unserviceable CI foot valve complete all as specified and directed. |
| 124 | S&F new CI foot valve 150 mm dia flanged pipe with necessary bolts and nuts, washer, welding work all fixing arrangement etc and replacement the unserviceable CI foot valve complete all as specified and directed. |
| 125 | S&F new CI foot valve 100 mm dia flanged pipe with necessary bolts and nuts, washer, welding work all fixing arrangement etc and replacement the unserviceable CI foot valve complete all as specified and directed. |
| 126 | S&F new CI foot valve 80 mm dia flanged pipe with necessary bolts and nuts, washer, welding work all fixing arrangement etc and replacement the unserviceable CI foot valve complete all as specified and directed. |
| 127 | S & F PVC Tank lead (top cover) high quality / heavy duty theraded type suitable for 500 ltrs etc complete all as specified and directed by Engr-in -Charge. |
| 128 | S & F PVC Tank lead (top cover) high quality / heavy duty theraded type suitable for 1000 ltrs etc complete all as specified and directed by Engr-in -Charge. |
| 129 | S & F PVC Tank lead (top cover) high quality / heavy duty theraded type suitable for 2000 ltrs etc complete all as specified and directed by Engr-in -Charge. |
| 130 | M & L for leakage rectification, cutting of existing pipe and making threaded for repair / replacement of U/S fittings etc pipe in short length ( up to 1.5 mtr ) for addition / alteration of 15 to 25 mm dia GI pipe and including replacement of fittings pipe in short lengths (up to 1.5 mtrs) of 15 to 25 mm dia GI pipe , welding including necessary excavation & earth work as required for making it serviceable complete all as specified and directed. |
| 131 | All as per item No 130 but 50 to 80 mm bore complete all as specified and directed by Engineer-in -Charge. |
| 132 | All as per item No 132 but 100 to200 mm bore complete all as specified and directed by Engineer-in -Charge. |
| 133 | Supply & Fix Submersible pump 0.5 HP complete set, with complete fixing accessories and connection complete all as specified and directed by Engineer-in -Charge. Make : Kirloskar/KSB/CG. |
| 134 | Supply & Fix Submersible pump 1.0 HP complete set, with complete fixing accessories and connection complete all as specified and directed by Engineer-in -Charge. Make : Kirloskar/KSB/CG. |
| 135 | Supply & Fixing pressure pump / (Booster pump) 0.6 HP complete set, with complete fixing accessories and connection complete all as specified and as directed by Engr-in-Charge. Complete all as specified and directed by Engineer-in -Charge. Make : Kirloskar/KSB/CG. |
| 136 | Supply & Fixing pressure pump / (Booster pump)1.0 HP complete set, with complete fixing accessories and connection complete all as specified and as directed . complete all as specified and directed by Engineer-in -Charge. Make : Kirloskar/KSB/CG. |
| 137 | Supply and Fix Taflon pipe for chloronome plant complete all as specifed and directed. |
| 138 | S & F in repair M S cover for over head tank /under ground sump / Ozone plant 3mm thick as per site requirement ( as per sample) with all fixing accessories and welding work complete all as specified and directed by Engr-in-Charge. |
| 139 | S & F in repair iron ladder for over head tank / under ground sump and Cover of SWT Tank 02 Nos as per site requirement fabricated with 50x50x6mm angle iron including necessary welding work as required ( as per sample) with all fixing accessories and welding work complete all as specified and directed by Engr-in-Charge. Note : Iron Angle ,Iron Net , welding , Hinge for Cover made out of Iron sheet or Iron Net ) |
| 140 | Supply and Fixing in repair insulated 500 ltr 8 layer triple Puff PVC Tank, of pure virgin plastic, food-grade, UV-stabilized plastic having anti bacterial, Extra strong heavy Lid, heavy durable quality, 8 layer triple puff with +/- 5 degree celcius Temperature control in puff quality, vertical cylindrical tanks with a flat base including fixing and making PCC foundation for placing the PVC tank including removal of old un insulated PVC tank of any size all as specified and directed by Engr-in-charge. Make- Sintex/ Hatich/Ultra Tuf/ACE Builders/ Flowtex. |
| 141 | Supply and Fixing in repair insulated 1000 ltr 8 layer triple Puff PVC Tank, of pure virgin plastic, food-grade, UV-stabilized plastic having anti bacterial, Extra strong heavy Lid, heavy durable quality, 8 layer triple puff with +/- 5 degree celcius Temperature control in puff quality, vertical cylindrical tanks with a flat base including fixing and making PCC foundation for placing the PVC tank including removal of old un insulated PVC tank of any size all as specified and directed by Engr-in-charge. |
| 142 | Material, Labour and Tools for cutting of Bitumin/PCC road for laying of GI/HDPE pipe for cable protection and Providing and laying patchment ready to use cold mix road repair material for pothole filling and road patch repair including surface preparation, application, compaction and finishing complete all as directed by engr-in-charge. |
| 143 | S & F of 40mm dia heavy grade Flexible PVC pipe suitable for swimming pool as per sample complete all as specified and directed by Engr-in-Charge. . |
| 144 | S& F in repair incluiding taking down of Air release valves, cast iron of size 100mm with cover and all fixing accessories, riser pipe connection etc complete welding work all as specified and directed by Engr -in -Charge. Make- Kirloskar/ Leader/ Zoloto/ L&T. |
| 145 | S & F in replacement of stuffing box of sluice valve in various size 80mm to 150mm complete with gland plate nut bults & gland packing etc complete all as specified and directed . |
| 146 | S & F in repair Gun metal spindle with qutku \\"U\\" thread suitable for any make / model sluice valve in various size 80mm to 150mm of complete all as specified and directed . |
| 147 | Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit ndot less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts and washers made out of GI / steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board / switch board / control board all shown in electrical plate No 3 of SSR Pt I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways incl earth work like excavation, returning filling back disposal etc complete. |
| 148 | M & L Galvanised iron strip 25 x4 mm with saddles and fixing screws etc,for roof conductors and down conductors above ground,complete all as specified and directed by Engineer-in -Charge. |
| 149 | Supply and installation with testing complete of digital water level indication device, operating on single phase supply direct display in 19 mm size digit system in meter/cubic meter of water of over head tank ensuring alarm while water fall or rise over predetermined limit including taking down unserviceable one with the following description, complete all as specified and directed by Engineer-in -Charge. Make: Seco type DDS-2/ Minilec / Schneider / Crompton / Selec control/ Lubi electronics / omron Note: (a) The entire unit must operate through a compact electronic circuit which must ensure reliable operation at 230 V+ 10% at 50 HZ + 5% with readable in digit display and alarm at low and high level of UG sump. (b) One circuit must be housed in high impact polystyrene moulded box with nylon moulded connections strips. The level system must be resistance / transducer type and resistive to corrosion and other contents available in water. (c) The whole unit must be controlled electronically and the upper level and lower level indications must be transmitted through highly sensitive micro switch. The complete unit must be in two parts. Each complete part must be fitted in MS CRS sheet box separately. One must be installed at UG sump / OH tank and second at pump House with proper powder coating paint with locking arrangements. |
| 150 | S&F flexible copper cable 4sqmm 4 core size from sump / over head tank to pump house for connecting the both units of water level indicator and passing through PVC flexible / rigid conduit and fixing on walls wherever required complete all as specified and directed by Engineer-in -Charge. Make- Havells/ Finolex/ KEI/ Plaza. |
| 151 | S&F pressure guage complete with suitable size of connecting pipe and taps etc of range 10 to14 Kg/cm2 inlcuding removing existing unserviceable pressure guage complete fixing accessories with connecting pipes, taps hole in the pumping line of any size complete all as specified and directed by Engineer-in -Charge. |
| 152 | S & F of submersible flat copper strandard cable 1100 Volt grade of size 6 sqmm 3 core complete including taking down complete all as specified and directed by Engineer-in -Charge. Make : Polycab/Finolex/KEI/RR Kabel. |
| 153 | S & F of submersible flat copper strandard cable 1100 Volt grade of size 10 sqmm 3 core complete including taking down complete all as specified and directed by Engineer-in -Charge. Make : Polycab/Finolex/KEI/RR Kabel. |
| 154 | Developing tubewell by compressed air with minimum pressure of 10Kg/Sq cm to 30 Kg / Sqcm and minimum 600 CFM all as specified in IS 11189-1985, para 4.3 and directed at site. Note :- (i) Pump Lifting/Lowering , Cleaning at site requirement and bringing the compressor, pump, pipe and other allied items shall be arranged by the contractor and nothing extra shall be admissible on this account. |
| 155 | M&L Plain cement concrete (1:2:4) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed. |
| 156 | Supply & install in repair DOL starter suitable for pump set upto 03 to 05 HP capacity with relay protection and all accessories with fixing arrangement suitable for panel, complete all as specified and directed of make L&T or its equivalent make L & K / Schneider / ABB / Siemens |
| 157 | Supply & install in repair DOL starter suitable for pump set upto 05 to 10 HP capacity with relay protection and all accessories with fixing arrangement suitable for panel, complete all as specified and directed of make L&T or its equivalent make L & K / Schneider / ABB / Siemens |
| 158 | S & F rubber mat of size 2m X1m X 12 mm thikness suitable for pump house complete all as specified and directed Engr -in -Charge. |
| 159 | Supply Only Copper Thimble for fixing of Copper cable with motor, starter panel 10/16/25/35 sqmm any size any type complete all as specified and directed by Engineer-in -Charge. |
| 160 | Supply and Fixing Battery 12 V, DC, 105 AH for Fire Hydrant Plant 85 HP capcity Diesel Engine complete all as specified and directed by Engineer-in -Charge. Make- Amron/ Exide/ Microtek. |
| 161 | Supply and Fixing Battery Lead, copper cable 10 to 16 Sq mm,1.5 to 2 mtr long with all fittings and fixtures between Battery and DG set for Fire Fighting Plant complete all as specified and directed by Engineer-in -Charge. |
| 162 | Supply only M Seal for rectification of leakage for any where any place complete all as specified and directed by Engineer-in -Charge. |
| 163 | Supply and fixing of dosing tank (Part No 042009C) only for Altoch Dosing System of capacity 100 liters, MOC: PE/FRP Lid Containing port hole for pouring chlorination chemical and water when necessary. Lid MOC : PE/FRP, Provision for mounting of Motor at proper angle , Provision of mounting dosing pump on lid/Wall , Level gauge, etc complete all as specified and directed by Engineer-in -Charge. |
| 164 | Routine maintenance of Fire Fighting System by attending fault testing of system, Quarterly checking of system etc. including replacement of unserviceable components/ parts are given below for Fire Fighting System installed at 117 HU, 153 HU, comprising following:-(a) 60 to 85 HP any capacity ,Main Fire Hydrant Pump Servicing & Testing (02 Nos.).(b) All wiring & cable connections.(c) Testing of Electrical control panel of Fire Fighting System Water Pumps.(d) Testing of Pressure switch & Pressure Guage. (e) Testing of all Sluice Valve, NRV & Air Release Valve. P.M. |
| 165 | Routine maintenance of Fire Fighting System by attending fault testing of system, Quarterly checking of system etc. including replacement of unserviceable components/ parts are given below for Fire Fighting System installed at P-264, P-265 comprising following:-(a) 60 to 85 HP any capacity ,Main Fire Hydrant Pump Servicing & Testing (02 Nos.).(b) All wiring & cable connections(c) Testing of Electrical control panel of Fire Fighting System Water Pumps.(d) Testing of Pressure switch & Pressure Guage. (e) Testing of all Sluice Valve, NRV & Air Release Valve. P.M. |
| 166 | Routine maintenance of Fire Fighting System by attending fault testing of system, Quarterly checking of system etc. including replacement of unserviceable components/ parts are given below for Fire Fighting System installed at P-266, P-267 comprising following:-(a) 60 to 85 HP any capacity ,Main Fire Hydrant Pump Servicing & Testing (02 Nos.).(b) All wiring & cable connections(c) Testing of Electrical control panel of Fire Fighting System Water Pumps.(d) Testing of Pressure switch & Pressure Guage. (e) Testing of all Sluice Valve, NRV & Air Release Valve. P.M. |
| 167 | Routine maintenance of Fire Fighting System by attending fault testing of system, Quarterly checking of system etc. including replacement of unserviceable components/ parts are given below for Fire Fighting System installed at New ATC Bldg, and Run way 36 & 18 End comprising following:-(a) 60 to 85 HP any capacity ,Main Fire Hydrant Pump Servicing & Testing (02 Nos.).(b) All wiring & cable connections(c) Testing of Electrical control panel of Fire Fighting System Water Pumps.(d) Testing of Pressure switch & Pressure Guage. (e) Testing of all Sluice Valve, NRV & Air Release Valve. P.M. |
| 168 | M & L for single outlet SS hydrant valve with 80mm inlet and 63mm outlet heavy duty fitted with instantaneous female SS coupling cap and chain fixed by means of flange, Nuts, Bolts and gaskets complete all as specified and directed. |
| 169 | S&F in replacement Hose box made of 18 gauge Ms Sheet 500mm x 600mm x 250mm and door with 4 mm thick glass and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard complete. |
| 170 | M&L for hose reel drum made of high quality mild steel powder coated in red colour confirming to IS- 884 latest version and ISI marked camplete with hose reel nozzle made of matal confirming to IS-8090 latest ravision and thermoplastic hose reel tubing 20mm dia and 30mtr long complete including required length of connecting pipe 25mm dia and on-off ball valve as approved by GE complete all as specified and directed. |
| 171 | M & L for branch pipe Stainless Steel S 63 mm instantaneous inlet, made threaded outlet, 15 mm bore nozzle long as per site requirement complete all as specified and directed by Engr -in -Charge. |
| 172 | M & L for 63 mm dia 30 mtr long RRL hose complete with male and female Coupling made out of stainless steel as per site requirement complete all as specified and directed by Engr -in -Charge. |
| 173 | Supply and fixing in repair hydrant valve wheel as per site requirement complete incl all necessary fixtures and fittings as reqd complete all as specified and directed by Engr -in -Charge. |
| 174 | Supply and fixing in repair hydrant gun metal female coupling brass as per site requirement complete all as specified and directed by Engr -in -Charge. |
| 175 | Supply and fixing in repair hydrant gun metal female coupling SS as per site requirement complete all as specified and directed by Engr -in -Charge. |
| 176 | Supply and fixing in repair brass lock pin (lugs) for 63 mm diaas per site requirement complete all as specified and directed by Engr -in -Charge. |
| 177 | Supply and fixing in repair hydrant valve spindle as per site requirement complete all as specified and directed by Engr -in -Charge. |
| 178 | Supply and fixing rubber hose pipe 20mm dia, plain 2 ply rayon braided high pressure as per site requirement complete all as specified and directed by Engr -in -Charge. |
| 179 | Supply only brass nozzle suitable for 20 mm dia rubber hose pipe as per site requirement as per site requirement complete all as specified and directed by Engr -in -Charge. |
| 180 | Supply and fixing in repair brass hydrant valve nut as per existing size as per site requirement complete all as specified and directed by Engr -in -Charge. |
| 181 | Supply and fixing in repair blank flange of size 80/100mm made out of MS 12 mm thick including flange joint as per site requirement complete all as specified and directed by Engr -in -Charge. |
| 182 | Supply and fixing in repair PVC blank cap of hydrants with GI chain as per site requirement complete all as specified and directed by Engr -in -Charge. |
| 183 | Supply and laying, ductile iron fittings for spigot and socketed pipes such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, ISI Marked [IS 9523 :2000 (Reaffirmed 2005)], suitable for bore of pipe up to 150 mm, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender