Tender For The Development Of A Parking Area On The Western Side Of The Tehsil Sandila Premises, Including Interlocking Construction And Lighting Arrangements (Installation Of 3 Semi-High Mast Electric Lights And 20 Pre-Cast Reinforced Cement Concrete (Rc
Tender Value
26.79 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
15 days left
EMD
54000
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hardoi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For The Development Of A Parking Area On The Western Side Of The Tehsil Sandila Premises, Including Interlocking Construction And Lighting Arrangements (Installation Of 3 Semi-High Mast Electric Lights And 20 Pre-Cast Reinforced Cement Concrete (Rcc) Posts).
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation in trenches for foundation and pipes, cables etc. in ordinary soil ( loan clay or sand ) i/c lift up to 1.5m and lead upto 50m and dressing of sides and ramming of sides and disposal of surplus excavated earth as directed by the E/I witthin a lead of 50 m as per S.I. No. 251. |
| 2 | P/L of cement concrete 1:6:12 ( 1 cement : 6 fine sand : 12 graded brick aggregate 40mm nominal size ) and curing complete, i/c cost of formwork in foundation and floors.as per S.I.No. 273 |
| 3 | Earth work in cutting or in embankment in ordinary soil i/c lead upto 30m distance & lift upto 1.5 m. required for proper completion of the work as perS.I. no. 253 |
| 4 | Class M-150 brick work in 1:4 cement and coarse sand mortar in foundation and plinth i/c supply of all materials, labour and T&P etc. required for proper completion of the work. as per direction of E/I S.I. NO.305b |
| 5 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density complete. as per Technical Specification Clause 401 |
| 6 | Providing and laying of Interlocking (Zig-zag Type) Concrete Block pavement having thickness 80 mm as per drawing and technical specification clause 1504 |
| 7 | 12 mm thick cement plaster of mix 1:4 ( 1 cement & 4 coarse sand ) as per SI 584+(583-582) |
| 8 | Providing and laying of P.C.C. Work in 1:2:4 , cement , coarse sand , 20 mm gauge stone grit of not less than strength of M - 150 and curing complete I/c all material , labour and T & P etc. . required for proper completion of the works .(S.I. NO.279b) |
| 9 | Providing and laying of R.C.C. work with cement , approved coarse sand and 2cm gauge stone ballast in the proportion 1:2:4 (1 cement : 6 aggregate ) in lintels of doors and windows excluding supply of reinforcement and its bending but i/c its fixing and binding wire and i/c necessary centering and shuttering etc. and also i/c supply of all materials, labour and T&P etc. required for proper completion of the works strength of the concrete shall not be less than M-150 as per SI No. 284 |
| 10 | Mild steel or Iron in Plain such as R.C.C. and R.B. work (when not included in an over all rates ) wrought to required shape as necessary i/c bending for proper completion of the work and i/c supply of steel its wastage bend hooks authorised over lapping shall be measured upto floor two level. as per SI No. 504 |
| 11 | Supply & fixing of inagration stone granite polished size of 600x900x20 mm with including letters , painting, groveeing of letters and filling of letter with golden varnish and cartage in all respect at site etc completion of all work.As per SE RED Approved. |
| 12 | S/F of 9 mtr GI Octogonal pole of approved make (top dia 70 mm Bottam dia 155 mm and base plate 16 mm thick) having of 3mm thikness with single arm bracket length of 1mtr. length in 1:2:4 RCC foundation bolt Including the cost of foundation, ezcavation & back filling and Required T&P complete in all respect (Sch No. PWD NEW 2024 CHAPTER -21.2.4) |
| 13 | S/F of Hexagonal MS frame 6 No. Of 170-200 wtt. LED T Lamp with NC lacquer acrylic lacquer and 2k PU painting and fitting complete in all respect.As per SE RED Approved. |
| 14 | Supply and Laying of Aluminium Conductor PVC Insulated armoured setved sheathed cables 110V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks 10sqmm 2core complete in all respect (Sch No. PWD NEW 2024 CHAPTER -20a.1.2) |
| 15 | S/F following way, single pole and neutral sheet steel, MCB distribution board, 240 V on surface/ recesss. Complete with tinned copper bus bar, neutral bus bar earth bar, din bar, intercinnections. Powder painted including earthing 6way double door complete in all respect DSR-2.3.1 |
| 16 | S/F Following rating double pole, 240 V isolator in the existing MCB DP Complete 63A Completed (Sch. No. DSR-2.12.2) |
| 17 | S/F of factory wired integral LED Street Light 170-200 watt fitting 6 single PC, pressure die cast and extruded aluminum housing complete IP 66 in all respect PWD NEW (Sch 23.26) Cat AAA |
| 18 | Earthing with G.I. earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required...complete in all respect DSR-5.2 |
| 19 | S/F of sign board lettering numbering on pole i/c all etc.As per SE RED Approved. |
| 20 | Supply and drawing following sizes of FRLS PVC insulated copper conductor, single core cable2X4sqmm complete in all respect DSR-1.17.20 |
| 21 | Supply and laying 25mm G.I strip at 0.50 meter below ground as strip earth electrod including connection and terminating with G.I nuts,bults spring, washer etc. as requried (Jointing shall be done by overlapping and with 2 sets of G.I nuts bults & spring washer spaced at 50mm)SCH No 5.9.(DSR) |
| 22 | S/f of Standard 3 Seater Heavy duty M-30 Grade R.C.C. Precast Colour Bench(1500x1000x620)mm i/c all completion of work in all respects etc.As per SE RED Approved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender