Tender For Special Repair To Building No T-25 (Jcos Living), Under Ge Dinjan
Tender Value
34.80 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
4 days left
EMD
69600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No T-25 (Jcos Living), Under Ge Dinjan
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 2 | S&F for Joist, channel, angle, or tee sections of Fe 290 (Gde E-165) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed. |
| 3 | Dismantling of Asbestos cement corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 4 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 5 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 6 | M&L for Anodised aluminium snap grid size 605 X 605 mm frame work for false ceiling supported with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long duly provided with 6 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation and acoustic purpose fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed |
| 7 | Dismantling timber scantling 40 sq cm & over in section , any position in unframed work complete all as specified and as directed |
| 8 | M & L Second class hard wood wel seasoned in scantling wrought complete all as specified and as directed |
| 9 | M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 10 | M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 11 | M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement)complete all as specified and directed. |
| 12 | Taking down plastering on lathing other than wire netting without removing lathing, in lime/cement mortar (One side only measured in cases where both sides are plastered) complete all as specified and as directed |
| 13 | M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. In walls, ceilings, stanchions, beams, etc. Including all laps, cutting and waste including lath plaster CM 1:4 complete all as specified and as directed |
| 14 | M&L for rendering 10 mm thick on one side of lathing in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement) complete all as specified and directed |
| 15 | M&L for rendering 15 mm thick on other side of lathing in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) complete all as specified and directed |
| 16 | M & L two coats of oil bound distemper over a coat of primer & 3 mm thick wall care Putty to make the surface even and smooth on newly plastered wall surfaces including preparation of surfaces complete all as specified and as directed |
| 17 | M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed. |
| 18 | M&L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and as directed. |
| 19 | M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 20 | M&L for preparation newly plaster surfaces of wall, chajja facia etc with wall care putty 3 mm thick to make the surface even and smooth and applying two coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS-15489-2004 alkali and fungal resistant exterior paint of required shed (company depot limited) with silicon additives 1/43 litres/10 Sqm over and including primer applied 0.90 litres/.10 sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 Mtr, the spray machine whould be of reputed manufacturer with proguards technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and acessories complete all as specified and directed. |
| 21 | M&L for Complete removal of existing treatment and treating from walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surface even and smooth complete all as specified and directed |
| 22 | Demolition of brick work or stone/boulder masonry, built in cement morter including all quoins, arches, pillars etc complete all as specified and as directed |
| 23 | M&L brickwork with subclass 'B' bricks well burnt, straight or curved on plan exc 6m mean radius built in cement motar 1:6 and complete all as specified and as directed. |
| 24 | Taking down chowkhats or frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and as directed |
| 25 | Taking down of chaukhats or frame exc 1.5 Sqm but n.exc 4 Sq. m (without taking off shutters from the frames) complete all as specified and as directed |
| 26 | S&F for Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. incl one sharp coat of red oxide primer complete all as specified and as directed. |
| 27 | M&L for Preparation of old painted surfaces of steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed |
| 28 | M&L for painting new steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint including preparation of new surface complete all as specified and directed |
| 29 | S&F 35 mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 30 | M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed. |
| 31 | M&L for Preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 32 | S&F 35mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete all as specified and as directed |
| 33 | S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 34 | S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed |
| 35 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2020 complete all as specified and as directed |
| 36 | S&F for powder coated aluminium three track sliding window (minimum thickness of powder coating 50 micron) including following components/specifications complete all as specified and as directed. (i) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing.(ii) All vertical/ horizontal joints shall be of extruded aluminium section so as to avoid any play between jointed members.(iii) All other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, etc.(iv) Rest all as specified in drawing no CEZ/2015/TD/007 Sheet no 1R/5, 2R/5, 3R/5, 4R/5 & 5R/5. |
| 37 | S & F in Sheet glass 5 mm thick selected quality complete all as specified and directed |
| 38 | S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc complete all as specified and directed. |
| 39 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed. |
| 40 | M&L PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling in back side of steel chowkhat etc. complete all as specified and directed |
| 41 | S&F for mild steel flat iron as in hold fast 25x6 mm conforming to Fe290 Gde E-165 complete all as specified and directed |
| 42 | S & F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed |
| 43 | M&L 150 mm long mild steel, barrel tower bolts of extruded section etc complete all as specified and as directed |
| 44 | S&F 150mm size, aluminium anodised handle, fabricated type complete all as specified and as directed |
| 45 | S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed |
| 46 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm complete all as specified and as directed |
| 47 | M&L cement concrete 75mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/hardstanding laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement and joint to be filled with Bituminous mastic filling in proportion of Bitumen and sand (1:2) including necessary form work complete all as specified and directed. |
| 48 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed |
| 49 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed |
| 50 | M&L of Cement concrete type C2 1:3:6 (40mm graded aggregate) as in surface channels and drains complete all as specified and as directed |
| 51 | M&L Extra for forming fair finishing to drains or channel of 30 cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed |
| 52 | M&L for RCC 1:2:4 type B-1 precast concrete as in cover slab set in CM (1:4) including necessary form work complete all as specified and as directed. |
| 53 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 54 | M & L for 25mm thick PCC 1:2:4, type B-0, (using 12.50 mm graded stone aggregate) as in under layer of tile flooring & finishing the surfaces rough to receive screed bed complete as specified and directed. |
| 55 | Material & Labour Non Skid ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in cm 1:6 complete all as specified and as directed |
| 56 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick back coat of cement mortar in 1:4 complete all as specified and as directed |
| 57 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of motar for laying floor finishes in CM 1:6 and complete all as specified and as directed |
| 58 | M&L for Coloured Glazed ceramic tiles in vertical surface of size 450X 300X 7 mm thick over and including 10 mm thick back coat of cement mortar in 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed. |
| 59 | M&L for Roughening surfaces of old conrete floor by picking,sweeping clean and washing down with water to remove dust etc complete all as specified and as directed |
| 60 | M&L for 20mm thick,screed bed or bedding layer of cement motar 1:6 for laying floor finishes complete all as specified and as directed |
| 61 | M&L for Kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing complete all as specified and as directed |
| 62 | M&L for kota stone slab 20-25mm thick in riser of steps,skirting dado and pillar laid over & incl 10mm thick screed bed in CM 1:4 and with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing complete all as specified and as directed |
| 63 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 64 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 65 | S&F 15 mm bore GI Tubes, 'Medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed |
| 66 | S&F 20 mm bore GI Tubes, 'Medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed |
| 67 | Dismantling water tanks and removing to store Exc250 & n exc 500 Ltrs complete all as specified and as directed |
| 68 | S&F Rotational moulded polyethylene water storage tanks 500Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed |
| 69 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including fabrication etc complete all as specified and as directed |
| 70 | S&F 15mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrulecomplete all as specified and directed. |
| 71 | S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 72 | S&F for 15mm dia pillar taps, cast copper alloy, withcapstan heads, chromium plated, fancy type, screwed down high pressure, with or without letter 'HOT' or 'COLD' with long screwed shanks &fly nuts, screwed for iron pipes complete all as specified and as directed |
| 73 | S & F as in repairs for Bib taps, cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferule, chromium plated fancy type for 15mm bore pipes, complete all as specified and as directed |
| 74 | S& F as repairs brass chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union 125 mm size complete all as specified and directed. |
| 75 | S & F for 600 x 450 mm bevelled edge mirror of selected qulity glass, mounted on 6 mm thick AC building boards of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 76 | S&F as in repairs for Gun metal gate valves with iron wheel headscrewed both ends for iron pipes or for unions for 20 mm bore pipes, complete all as specified and as directed |
| 77 | Supply and fix in repair 50 mm bore ,high density polyethylene pipes (HDPE) of pressure rating 6 kgf/ cm2 in waste pipe for WHB and sinks,complete all as specified and as directed. |
| 78 | Supply and fix waste Pipe (PTMT) 32 mm/ 40mm for wash basin and sink complete all as specified and as directed. |
| 79 | S&F as in repairs for stop valves/angular stop cock, cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions for 15 mm bore pipes fency type complete all as specified and as directed |
| 80 | S&F for brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges complete all as specified and directed. |
| 81 | Supply and fix for PVC low level flushing cistern, white, 10 Ltrs capacity complete with all internal accessories & fixed to wall & making good to wall surfaces incl. taking down existing flushing cistern complete all as specified and as directed |
| 82 | Supply and fix in repair Vitreous China wash down water closet pan (Semi pedestal pattern Anglo Indian Type), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover, connection to drain or outlet complete all as specified and as directed |
| 83 | S&F health faucet hose and hook complete all as specified and as directed. |
| 84 | S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed |
| 85 | Supply and fix for vitreous china wash basin, white, flat back, size: 550 X 400mm, excl. taps waste chain & plugs & porcelain stopper but incl. brackets, waste coupling as in repair incl. cutting for & pinning in ends of brackets or erecting stand but of fixing & supply of waste pipe complete all as specified and as directed |
| 86 | Demolition and breaking up 100mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed |
| 87 | S&F 110mm bore PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and as directed |
| 88 | S&F 110mm bore PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches complete all as specified and as directed |
| 89 | S&F PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 75mm bore complete all as specified and as directed |
| 90 | S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed |
| 91 | S&F in repairs, PVC (SWR) junction, single T equal or unequal 110mm bore complete all as specified and as directed |
| 92 | S&F in repairs, PVC (SWR) 75 mm bore, floor trap ,plain with grating including jointing to waste pipe with solvent cement and fixing in PCC 1:2:4 complete all as specified and as directed |
| 93 | S&F in repairs, 110mm bore PVC (SWR) vent cowl complete all as specified and as directed |
| 94 | S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm bore, for low level cistern complete all as specified and as directed. |
| 95 | S&F in repairs 32mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and directed. |
| 96 | S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed. |
| 97 | M& L Chequered cement concrete tiles 25cm x 25cm x 20mm thick set, jointed and pointed in neat cementsluny in floors over and including 20mm thick screed beb in CM 1:6 complete all as specified and as directed |
| 98 | M&L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone agg) as in floor finished even and smooth without using extyra cement complete all as specified and as directed. |
| 99 | S&F curtain rails, mild steel, aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed |
| 100 | M&L for Cutting into existing manholes for connecting new drains,(100mm dia) making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required and complete all as specified and as directed. |
| 101 | S&F for Parryware Corner shelf complete all as specified and as directed. |
| 102 | Supply only integral water proofing compound complete all as specified and as directed |
| 103 | Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and as directed |
| 104 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. |
| 105 | Taking down fan, sealing cable end, dismantling blades and removing fan and keeping it in MES store for safe custody and refixing it after repair complete all as specified and as directed Please Enable Macros to View BoQ information |
| 106 | Taking down fan, sealing cable end, dismantling blades and removing fan and keeping it in MES store for safe custody and refixing it after repair complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender