Tender For Repair / Maintenance And Servicing Of Oil Fired Incinerator, Laundry Plant And Other Connected Equipment Under Age E/M-Ii Of Ge 865 Ews
Tender Value
45 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
12 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair / Maintenance And Servicing Of Oil Fired Incinerator, Laundry Plant And Other Connected Equipment Under Age E/M-Ii Of Ge 865 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling/strip opening of primary chamber, burner and other connected accessories and servicing/overhauling of static hearth primary chamber lined with refractory insulation brick of IS-2042 standard having standard operating temperature 800+50 degree centigrade with temperature resistance 1400 degree centigrade of oil fired Incinerator and replacement of following parts :- Note : Spares parts shall be measured and paid seperately in respective items. |
| 2 | Supply only Nozzle suitable for primary chamber of incinerator of capacity 50 Kg. |
| 3 | Supply only Fuel pump suitable for primary chamber of incinerator of capacity 50 Kg. |
| 4 | Supply only Pressure gauge suitable for primary chamber of incinerator of capacity 50 Kg. |
| 5 | Supply only Photo cell suitable for primary chamber of incinerator of capacity 50 Kg. |
| 6 | Supply only diesel filter suitable for primary chamber of incinerator of capacity 50 Kg. |
| 7 | Supply only Flexible hose pipe suitable for primary chamber of incinerator of capacity 50 Kg. |
| 8 | Supply only Inlet oil valve of 1/2\\" suitable for primary chamber of incinerator of capacity 50 Kg. |
| 9 | Supply only Sequence controller suitable for primary chamber of incinerator of capacity 50 Kg. |
| 10 | Supply only HT wire suitable for incinerator of primary chamber of incinerator of capacity 50 Kg. |
| 11 | Dismantling/strip opening of secondary chamber, burner and other connected accessories and servicing/overhauling of static hearth primary chamber lined with refractory insulation brick of IS 2042, minimum 115 mm thickness having standard operating temperature 1050+50 degree centigrade with temperature resistance 1400 degree centigrade including replacement of following unserviceable / damaged parts :- |
| 12 | Supply only Nozzle suitable for secondary chamber of incinerator of capacity 50 Kg. |
| 13 | Supply only Fuel pump suitable for secondary chamber of incinerator of capacity 50 Kg. |
| 14 | Supply only Pressure gauge suitable for secondary chamber of incinerator of capacity 50 Kg. |
| 15 | Supply only Photo cell suitable for secondary chamber of incinerator of capacity 50 Kg. |
| 16 | Supply only diesel filter suitable for secondary chamber of incinerator of capacity 50 Kg. |
| 17 | Supply only Flexible hose pipe suitable for secondary chamber of incinerator of capacity 50 Kg. |
| 18 | Supply only Inlet oil valve of 1/2\\" suitable for secondary chamber of incinerator of capacity 50 Kg. |
| 19 | Supply only Sequence controller suitable for secondary chamber of incinerator of capacity 50 Kg. |
| 20 | Supply only HT wire suitable for secondary chamber of incinerator of capacity 50 Kg. |
| 21 | M&L for replacement of gasket for manual feeding door and ash removal door of Incinerator, complete all as specified and/or as directed by Engr-in-Charge. |
| 22 | Disconnecting unserviceable ID (Induced Draft) fan and servicing/overhauling, oiling and greasing of ID fan including replacement of all bearings, complete all as specified and/or as directed by Engr-in-Charge. |
| 23 | Disconnecting FD (Forced Draft) fan damper and servicing/overhauling of FD fan damper including refixing to its original position, complete all as specified and/or as directed by Engr-in-Charge. |
| 24 | S&F in replacement of temperature controlling rod 18\\" suitable for incinerator, Make THERMAX, Model No FRVS-75, complete all as specified and/or as directed by Engr-in-Charge. |
| 25 | S&F in replacement of temperature controlling rod 6\\" suitable for incinerator, Make THERMAX, Model No FRVS-75, complete all as specified and/or as directed by Engr-in-Charge. |
| 26 | S&F in repacement of ID (Induced Draft) fan impeller as existing, made out of stainless steel, complete all as specified and/or as directed by Engr-in-Charge. |
| 27 | S&F in replacement of touch screen HDMI suitable for incinerator, Make THERMAX, Model No FRVS-75, complete all as specified and/or as directed by Engr-in-Charge. |
| 28 | S&F in replacement of PLC input and out device suitable for incinerator, Make THERMAX, Model No FRVS-75, complete all as specified and/or as directed by Engr-in-Charge. |
| 29 | Supply and fix temperature card for PLC input and out device suitable for incinerator ,Make THERMAX , model no FRVS-75. |
| 30 | S&F in replacement of refractory material inside manual cover, complete all as specified and/or as directed by Engr-in-Charge. |
| 31 | M&L for painting of incinerator chimney of existing height by scraping outside surface area of chimney and applying one coat of redoxide, two coats of synthetic enamelled silver spray paint. Scaffolding required for chimney painting to be arranged by the Contractor without any extra cost. If any gas welding is required at the time of chimney maintenance, it will also be arranged by the Contractor without any extra cost, complete all as specified and/or as directed by Engr-in-Charge. |
| 32 | Dismantling of complete unserviceable burner assembly from secondary chamber and replacing the same by new incinerator burner assembly suitable for Make Thermax Model No FRVX-75 of burning capacity 55-60 kg /hr and testing after completion, complete all as specified and/or as directed by Engr-in-Charge. |
| 33 | S&F in replacement of temperature controller make Selec Model No DTC 304-2 or equivalent, complete all as specified and/or as directed by Engr-in-Charge. |
| 34 | S&F in replacement of relay of make ABB Model No T25DU or equivalent, complete all as specified and/or as directed by Engr-in-Charge. |
| 35 | S&F in replacement of Contactor of make ABB Model No B9-30-10, complete all as specified and/or as directed by Engr-in-Charge. |
| 36 | S&F in replacement of V-belt size B-81. Make : Fenner/Navyug/Dunlop, complete all as specified and/or as directed by Engr-in-Charge. |
| 37 | Supply, connection and replacement of thermal heater wires on water supply pipe lines (GI/MS/PPR) for heating of water through minimum 25 watt per meter in spiral/ straight line shape above outer diameter of pipe with aluminium tape insulation to preserve heat, fiber glass layer, second layer of aluminium tap to hold fiber glass by glass wool minimum 40mm thick with essential tapes, complete all as specified and/or as directed by Engr-in-Charge. |
| 38 | Disconnecting electrical connection and water connection of steam boiler 600 Kg Model VE 80600 Kg Make Vishal Energy and dismantling the same for repairs by removing nuts & bolts, front door including fitting and taking out old defective/ unserviceable parts (as follows), cleaning, servicing, oiling and greasing of all moveable parts and replacement of gasket and packing set of chamber and testing on completion. Note: Spare parts shall be measured and paid separately under respective items. |
| 39 | Supply only optimizer as per existing model and capacity. |
| 40 | Supply only Economizer as per existing model and capacity. |
| 41 | Supply only burner rod as per existing model and capacity. |
| 42 | Supply only oil filter as per existing model and capacity. |
| 43 | Supply only filter element as per existing model and capacity. |
| 44 | Supply only multiport valve of size 40mm dia Make-Sant/Kartar/ Thermax. |
| 45 | Supply only crystal salt suitable for water softening plant. |
| 46 | Supply only metallic hose pipe of size 1” of 30” long. |
| 47 | Supply only pump seal for boilers size 50mm bore. |
| 48 | Supply only softening compound (Chemical Resin T-40 NA) for removal of iron, calcium and magnesium from water to avoid scaling inside hot water pipe line. |
| 49 | Supply only burner nozzle 6.0GPH. Make : Danfoss. |
| 50 | Supply only steam coil suitable for the steam boiler 600 Kg. Make : Superfab/Thermax/fabtech/Maxima. |
| 51 | Supply only piston (HTN-1). |
| 52 | Supply only photocell 8203. |
| 53 | Supply only pressure switch PM1. |
| 54 | Supply only flame coke. |
| 55 | S&F triplex pump set 3 HP capacity for boiler. |
| 56 | S&F in replacement of rope non-asbestos best quality, complete all as specified and/or as directed by Engr-in-Charge. |
| 57 | S&F in replacement of digital temperature ammeter range 0ºC to 250ºC. Make : Nutronic. |
| 58 | S&F in replacement of inner jacket suitable for the 600 Kg/hr steam boiler. Make: Maxima/Thermax/Fabtech. |
| 59 | Opening, dismantling the parts (as follows) and disconnecting all water connection and electrical connection of washer extractor capacity 30 Kg Make Superfab and reassemble the same for repair after emoving nuts and bolts including oiling, greasing and alignment of inner basket, alignment of shaft, pulley alignment, contract set of contractor cleaning, servicing and cleaning of pneumatic kits, air filter cleaning, cleaning the drain system and turning work and reassembling the same and testing on completion.Note: Spare parts shall be measured and paid separately under respective items. |
| 60 | Supply only touch screen for any size/washer extractor machine as per existing Make : Inco/Fabtech/Fabcare. |
| 61 | Supply only V belt size B-56. Make : Fenner/ Navyug/Dunlop. |
| 62 | Supply only V-belt size B-96. Make : Fenner/ Navyug/Dunlop. |
| 63 | Supply only angle steam valve. |
| 64 | Supply only bearing 6313 (2RS) for AWX-30 Kg. |
| 65 | Supply only bearing 6314 (2RS) Make : SKF/NTN/NBC. |
| 66 | Supply only steam solenoid valve for washer extractor 230 volts AC. Make:Falcon/Techno. |
| 67 | Supply only water solenoid valve For extractor 30 Kg 230 Volts AC. Make : Flacon/Techno. |
| 68 | Opening, dismantling all parts (as follows) and disconnecting all water connection and electrical connection of drying tumbler capacity of 30 Kg Make Superfab and reassemble the same for repair after removing nuts and bolts including oiling, cleaning, servicing and greasing, balancing and alignment of cylindrical basket, balancing of blower, shaft turning, cleaning and servicing of steam radiator and replacement of following parts for the smooth functioning of the machine, complete all as specified and/or as directed by Engr-in-Charge.Note: Spare parts shall be measured and paid separately under respective items. |
| 69 | Supply only V-belt size B-72. Make : Fenner/Navyug/Dunlop. |
| 70 | Supply only V-belt size A-68. Make : Fenner/Navyug/Dunlop. |
| 71 | Supply only contactor 25 Amp normally open normally closed with NC-Block. Make: BCH. |
| 72 | Supply only indicator with lamp complete Make : Vaishno/BCH/Caltron. |
| 73 | Supply only limit switch for auto door closer & opener. Make : Vaishno/BCH/Caltron. |
| 74 | Supply only time switch reversing type 20-5-25 size. Make : Paracon/L&T/Havelles. |
| 75 | Supply only steam stop valve 20 mm bore. Make : Sant/Leader/Jelpec |
| 76 | Supply only steam stop valve 15mm bore. Make : Sant/Leader/jelpec |
| 77 | Supply only steam coil set suitable for air solenoid valve. Make-Akari/ Jelpec/ Janatics |
| 78 | Supply only push button for on/off. Make : Vaishno/ Bharat Bijlee/ABB |
| 79 | Supply only over load relay 2.5 to 4 Amps. Make : L&T/Seimens/GE |
| 80 | Supply only ball bearing for both side of calendaring drum bearing 6264-02Nos Make : NBC/SKF/ZKL |
| 81 | Supply only ball bearing for both sides of calendaring drum bearing 6217-02 Nos Make : NBC/SKF/ZKL |
| 82 | Disconnecting all electrical connection and dismaintling parts (as follows), water connection, connected MS pipe line and other items of water softener plant and dismantling the multiport valve, resin tank, water circulator pump, MS pipe line and taking down all defective parts including replacement of old / unserviceable spare parts as under mentioned and re-assembling, commissioning & testing of water softener. |
| 83 | Supply only multi port valves. |
| 84 | Supply only MS pipeline 25 mm. |
| 85 | Supply only water circulating pump. |
| 86 | Supply only resin tank 250 x 1150 mm. |
| 87 | Supply only Ejector white. |
| 88 | M&L for repair of flat work drying ironer heated chest type double roll Make Superfab of Laundry Plant by opening, dismantling steam connection, air connection and electrical connection for repair to chest alignment, roller alignment, chest turning work, polishing and replacement of following spare parts :- (a) Steel wool padding.(b) Outer cloth cover for roller. (c) Emery Paper sheet for duffel roller. (d) Canvas conveyer belts of existing sizes - 16 Nos. (e) Blower bush.(f) Cylinder kit set. (g) Pneumatic air solenoid 4” x11/16” for pneumatic cylinder for lifting of chest.Make: Superfab/Fabtech Engineering/NAT Steel Equipment. |
| 89 | Opening, dismantling parts (as follows) and disconnecting all water connection and electrical connection of old type washer extractor capacity 30 Kg and reassemble the same for repair after removing nuts and bolts including oiling, greasing and alignment of inner basket, alignment of shaft, pulley alignment, cleaning the drain system and turning work and reassembling the same after replacement of following parts and testing on completion.Note : Spare parts shall be measured and paid seperately under respecive items. |
| 90 | Supply only V-belt size B-100. Make : Fenner/Navyug/Dunlop. |
| 91 | Supply only V-belt size B-63. Make : Fenner/Navyug/Dunlop. |
| 92 | Supply only pressure switch. |
| 93 | Supply only air solenoid valve. |
| 94 | Supply only flow control valve. |
| 95 | Disconnecting all electrical connection and dismantling parts (as follows) of the air compressor and taking out cylinder from the compressor and repair the same with replacement of engine oil, key of shaft and re-fixing the same including testing, complete all as specified and/or as directed by Engr-in-Charge. |
| 96 | Supply only water solenoid motorized pneumatic valve 4” of outlet. Make: Sant/Kartar/SK |
| 97 | Supply only water solenoid motorized pneumatic valve 2” of inlet Make: Sant/kartar/SK |
| 98 | Supply only V-belt size B-81. Make : Fenner/Navyug/Dunlop. |
| 99 | M&L in replacement of angle valve pneumatic 1”. Make: Jelpec/Janatics/Akari. |
| 100 | M&L in replacement of angle valve pneumatic ¾”. Make: Jelpec/Janatics/Akari. |
| 101 | Disconnecting the electric induction motor from the existing machine of any size and taking out the unserviceable winding wire complete and cleaning the slots, rewinding the motor with super enamelled copper winding wire temp range 104 degree centigrade to 204 degree centigrade of existing gauge including all other insulating material of the following capacity of any make and re-fixing the same after repair of existing machine including testing, complete all as specified and/or as directed by Engr-in-Charge :- |
| 102 | Induction motor 2HP capacity. |
| 103 | Induction motor 5 HP capacity. |
| 104 | Induction motor 10 HP capacity. |
| 105 | Supply only contractor coil 240 voltage 32 Amps. Make : L&T/Siemens/GE |
| 106 | M&L in replacement of MCB 63 Amp x 4 Pole, 16 KA. Make : Havells/L&T/Siemens |
| 107 | M&L in replacement of MCB 25 Amp x 4 Pole, 16 KA. Make : havells/L&T/Siemens |
| 108 | M&L in replacement of iron steam resting pad Make : Fabcare/Fabtech |
| 109 | M&L in replacement of MPD for drying tumbler. |
| 110 | M&L in replacement of main door rubber gasket for washer extractor 30 Kg. |
| 111 | S&F flexible air pipe 08 mm bore 100mm long as per sample. |
| 112 | S&F flexible air pipe 15 mm bore 550 mm long as per sample. |
| 113 | S&F in replacement of air regulator filter 15mm dia (0.5\\" BSP) for upto air connection at 5.7 Kg/Cm2 Make-Jelpec/Janatics/Akari |
| 114 | S&F in replacement of Contactor set for Drive Contractor. Make-L&T/Siemens/BCH |
| 115 | S&F in replacement of Contactor set for Idler Contractor. Make-L&T/Siemens/BCH |
| 116 | S&F in replacement of Terminal block. Make-L&T/Siemens/BCH |
| 117 | M&L in replacement of linen cover of vaccum finishing table for linen pressing. Make-Fabcare/Fabtech/Supershine |
| 118 | S&F solenoid valve coil for steam/ water solenoid valve. Make : Akari/Jelpec/Janatics. |
| 119 | S&F in replacement of trolley wheel swivelling type ball bearing suitable for Mech. Laundry plant of size 6” dia. Make : Senson/Satyam/Rollin. |
| 120 | M&L in replacement of MPD for flat work ironer. Make : Softhard/fabcare/Fabtech |
| 121 | S&F gate lock assembly suitable for washer extractor capacity 30 Kg. Make : Superfab. |
| 122 | S&F solenoid valve for controlling water drain pipe 220 ltr for 50/30kg W/E. Make : Vaishno/BCH/Caltron. |
| 123 | S&F over load relay 10 to 15 Amps. Make : L&T/Seimens/GE |
| 124 | S&F gear ring set comprising of gear ring of size 20”x2 ½ and 4”x 2 ½ each suitable for flat work ironer. Make : Superfab |
| 125 | S&F in replacement of electric convector Heat Panel with over heat protection thermostatically controlled, detachable wall mounting bracket, digital LED display, digital room temp sensor, totally silent operations of heater & thermostat of size width 1200 mm height 450 mm depth 90 mm of rated capacity 2600 watts 230 volts 50 Hz, complete with all other accessories, complete all as specified and/or as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender