Tender For Special Repair To Building No. Rb-02 At Mcte Under Ge Mcte Mhow.
Tender Value
67.95 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
2 days left
EMD
1.27 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No. Rb-02 At Mcte Under Ge Mcte Mhow.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 2 | M&L Vitrified Ceramic tiles 8-10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 3 | M&L Vitrified Ceramic tiles 8-10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 4 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 5 | M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 6 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed. |
| 7 | M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | All as per Item No.07, above, but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 9 | M&L for mirror poishing of old kota stone complete all as specified and directed byEngineer-in -Charge. |
| 10 | M&L 16 to 20mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 11 | Taking down chowkhats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and directed. |
| 12 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 13 | Taking down Shutters of any description exc . 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed. |
| 14 | M&L Plain, solid, straight chowkats and frames made out of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed, complete all as specified and as directed by Engineer-in-Charge. |
| 15 | S&F Pressed steel frames for doors size 105x60mm with one rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 16 | M & L PCC 1:2:4 type B-0 (using 12.5 mm graded stone ) aggregate for filling in pressed steel door framed complete all as specified and directed. |
| 17 | S&F for 35 mm thick second class hard wood plain framed factory made panelled shutter (two panel) with lock rail and panel 9mm B.W.P or 12 mm veneered particle board with commercial veneering on both faces . The size of rail and style as per IS 1003/SSR part -1 complete all as specified and directed. |
| 18 | S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and directed. |
| 19 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube , S&F in opening as per specification & drawing complete all as specified and directed. |
| 20 | S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,incl 03 Nos of 100mm size stainless steel butt hinges for each shutter, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 21 | M&L Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described, & treated with tar or coal tar black paint complete all as specified and directed. |
| 22 | S&F mild steel hold fasts, plain angle cleats for securing purlins ,and similar small articles conforming to Fe 290 gde E 165 complete all as specified and directed. |
| 23 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 24 | S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 25 | S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 26 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 27 | S&F100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 28 | S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 29 | S&F 100mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 30 | S & F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc complete all as specified and directed. |
| 31 | S&F in repairs 300 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 32 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 33 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide complete all as specified and directed. |
| 34 | S&F in repair 25 mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc complete all as specified and directed. |
| 35 | S&F Powder coated aluminium windows and ventilator fixed having aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips rubbers packing anodized including sheet glass 5.5 mm thick complete all as specified and directed. Make of section-JINDAL /INDAL /HINDALCO and sheet glass of make-SAINT GOBAIN/MODI FLOAT /TRIVENI FLOAT GLASS |
| 36 | S&F powder coated aluminum frame for windows/ventilators with one or more rebates including grills, jointing cleats for fixing etc complete all as specified and directed. Make of section- JINDAL /INDAL /HINDALCO. |
| 37 | S&F mild steel framed work such as grills, gratings, gates etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified and directed. |
| 38 | S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle , flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed. |
| 39 | S&F in repair 600x600mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws.complete all as specified and directed. |
| 40 | S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed. |
| 41 | S&F in repairs vitreous china,white, wash hand basin, with pedestal flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed. |
| 42 | S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and directed. |
| 43 | S & F in repairs 32/40 mm PVC downpipe for kitchen WHB fittled to Kitchen Sink incl all necessary brackets etc complete all as specified and directed. |
| 44 | S&F Grating 100 mm dia of CP with or without hole complete all as specified and directed. |
| 45 | S&F in repair 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 46 | S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed . |
| 47 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed. |
| 48 | S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 49 | S & F in repairs two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 50 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System , 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed. |
| 51 | S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern) complete all as specified and directed. |
| 52 | S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed. |
| 53 | S & F in reparis Stainless Steel Wall Mount Soap Case fixed to wall complete all as specified and directed. |
| 54 | S&F Brass Bottle Trap 300 mm (12\\") Designer wall connection pipes and wall flange complete all as specified and diretced. |
| 55 | S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed. |
| 56 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed. |
| 57 | S&F, laying and testing for 15 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 58 | M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth complete all as specified and directed. |
| 59 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for re- fixing complete all as specifed and directed. |
| 60 | S&F, laying and testing for 20 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 61 | Dismantling PVC water tanks 1000 litres capacity complete all as specified and directed. |
| 62 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 63 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubbing down with water etc, complete all as specified and directed. |
| 64 | M&L for Rendering 15 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 65 | M & L for prepration of new wall interior surfaces & applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls etc complete.(any height of bldg). complete all as specified and directed. |
| 66 | M&L for Rendering 5 mm thick on fair faces of concrete surface of ceiling, chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and as directed. |
| 67 | M&L for Preparation of newly plastered surface and applying two coats of white wash on Ceiling complete all as specified and as directed. |
| 68 | M&L for Rendering 15 mm thick on fair faces of concrete/brick exterior surfaces in cement mortar 1:4, in two coats (10mm thick backing coat+5mm thick finishing coat) finished even and smooth with out using extra cement including mixing of intagral water proofing compound in 5mm thick finishing coat etc complete all as specified and directed.(Note:-WPC will be measured seperately) |
| 69 | Material & Labour for preparation of surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over a coat of 2 mm putty over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. ® 15014B Providing and applying plaster of paris complete all as specified and directed. |
| 70 | Supply only integral water proofing compound complete all as specified and directed. |
| 71 | M&L for complete removal of existing treatment from wall by scrapping of (exterior) surfaces of old decorated walls etc, and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. |
| 72 | M&L for complete removal of existing treatment from walls by scrapping & washing etc and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 73 | M&L preparation of old plaster surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 74 | M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed. |
| 75 | M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed. |
| 76 | M&L for providing PVC WALL PANELLING of 5 mm thick consisting of panel of desired size stuck on inner frame work of 50 mm wide strips of 5 mm thick prelaminated PVC sheet . The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company . The strips should have in their centre a gove of 6mm widht and 1 mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips .The PVC strips shall be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200 mm . A groove of 2mm may be left at the joint of two panels for aesthetic looks . The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5 mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement complete all as specified and directed. |
| 77 | S&F in repair Ball valves 15 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 78 | S&F in repair PVC (SWR) pipe 110 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed. |
| 79 | S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with adhesive joint fixed to floor or trenches including fittings complete all as specified and directed. |
| 80 | Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed. |
| 81 | S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete all as specified and directed. |
| 82 | S&F in repairs PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) ,in repairs and including waterleak proor treatment complete all as specified and directed. |
| 83 | S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed. |
| 84 | S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed. |
| 85 | S&F PVC (SWR) Branch pieces , double (double Y )equal or unequal of pipe 75 mm bore complete all as specified and directed. |
| 86 | S&F PVC (SWR) Branch pieces , double (double Y )equal or unequal of pipe 110mm bore complete all as specified and directed. |
| 87 | Demolition of cement concrete unreinforced in ground floor & paving n.exc 15cm thickness and removal of debris from site complete all as specified and directed. |
| 88 | M&L broken stone or bounders hardcore of gauge n exc. 63 mm , deposited, spread and levelled in layers n exc. 15 cm thick , watered and rammed to a floor/true surface complete all as specified and directed. |
| 89 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed. |
| 90 | M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade laid dry in floor/path with and including 50mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified and directed. |
| 91 | M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and fair incl cutting joints and filling with bitumen and sand mixture complete all as specified and directed. |
| 92 | M&L Cement concreat type B-0 (1:2:4) using 12.5mm graded stone aggregate 25 mm thick finished surface rough to receive tiliing complete all as specified and directed. |
| 93 | Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m complete all as specified and directed. |
| 94 | M &L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed. |
| 95 | M &L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 96 | S&F Formwork to soffits of suspended slabs such as roof slabs , floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and directed. |
| 97 | M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and directed. |
| 98 | M&L mild steel TMT Bars 6mm dia to 10mm dia length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and directed. |
| 99 | Demolition of reinforced cement concrete (reincorcement cut as required to facilitate demolition) of any description and in any position not otherwisecomplete all as specified and directed. |
| 100 | M&L RCC nominal mix Type A 1 1: 1.5: 3 20 mm graded aggregate ) for slabs supported on walls, beams and column in floors, roofs , alndings, blaconies , canopies , deck slabs ,and in shelves and the like complete all as specified and directed. |
| 101 | Dismantling Plain or Corrugated steel sheeting any gauge,thickness ,including Nainital or similar pattern Roof covering complete all as specified and directed. |
| 102 | Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed. |
| 103 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 104 | M&L for rolled section/hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting ,connecting to gusset plate etc complete all as specified and directed by Engineer-in-charge.Fe 410-w (Gde 250) quality \\"A\\" |
| 105 | Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as specified and directed. |
| 106 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200 mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595x595x6 mm thick E-Board Designer ceiling fixing 600mmx 60mm x 6mm grid (Frame work) etc complete all as specified and directed. |
| 107 | M&L for 10-12 mm thick decorative plaster of paris false ceiling bending /moulding as required shape with two coats of plaster emulsion paint over a coat of primer on decorative surgaces of ceiling including 26 gauge galvanised iron sheet 'C' shaped main member @ 750mm C/C cross member 'U' shape @ 450mm c/c and perimeter of 'C' shaped GI wire 6 mm dia or more or FI 40 X 4 mm thick for hanging arrangement with MS suspension fastener spaced @ 450mm c/c in both direction and 'C' member shall be made out of not less than 90mm wide GI sheet strip and side tray as required of approximate size 3.5 mtr height as required at site complete all as specified and directed. |
| 108 | M & L two coats of silca top seal 107 or aqua am top guard inside of the wall of the room, a two components ready to use polymer modified cementatious coating. First coat should be applied horizontally and second coat should be applied vertically the thickness of coating should not be less than 1.5mm complete all as specified and directed and sprinkle sand over the coated suface. |
| 109 | Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed. |
| 110 | M&L for roof treatment as per the description below:-a) Plain cement concrete average 50 mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggrigate )for levelling course for providing slope in the roof @ 1:40 gradientb) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces.c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification And apply two coat of silver aluminum paint . |
| 111 | Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fixture and fittings such as switches, light fittings,ceiling rose, pendent holders, bell, regulators and socket,light fittings etc .removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface & wall/ floor complete all as specified and directed. |
| 112 | M&L for point wiring with PVC insulated unsheathed multi stranded FRLSH type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLSH type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for the following :- NOTE : Make of sunken box must be same as that of the switch/socket and thickness of the MS sheet of sunken box should be 1mm . (a) One light/ point controlled by one no, one way 5 Amp switch. |
| 113 | One Ceiling fan/exhast fan point controlled by one no, one way 5 Amp switch. |
| 114 | One three pin socket outlet 5 amps point controlled by one no, one way switch on independent board. |
| 115 | One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board. |
| 116 | All as per item No.112, above, but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board. Note for item No 2 & 3:- (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion. |
| 117 | S&F modular switch 230/250 volts grade one way (as catered in point wiring above) of following rating :- (a) One way 6 Amp one module rating |
| 118 | S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. |
| 119 | S & F Fan step regulator, 120W - 2 module complete all as specified and directed. |
| 120 | S&F One way 16 Amp one module rating complete all as specified and directed. |
| 121 | S&F modular socket out let shuttered type flush mounting type, 230/250 volts grade (as catered in point wiring above) of following ratings:- 2/3 Pin 6 Amp combined 2 modular type. |
| 122 | S&F 2/3 Pin 16 Amp combined 2 modular type complete all as specified and directed. |
| 123 | S&F ceiling rose 3 phase / PVC/polycarbonated, isolated body ISI Marked complete all as specified and directed. |
| 124 | All as per item No. 112, above, but using 4 sq mm single core copper conductor cable of multistranded FRLSH insulated unsheathed 1100 volts grade for 5/15 amps point controlled with modular motor starter for air conditioner including necessary running of 4 sq mm copper FRLSH wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed. |
| 125 | Taking down old sub main wiring any size aluminum/copper conductor cable from the concealed conduit from the wall/ceiling and making good to the disturbed surface complete all as specified and directed. |
| 126 | M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1 x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSH type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed. |
| 127 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 10 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note:- Two runs of 10 sqmm cable,one run of 10 sqmm cable and one run of PVC conduit will be measured as one unit |
| 128 | Disconnecting mains connection and taking out old sheet steel enclosure (DB) distribution board and connected accessories complete all as specified and as directed. |
| 129 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to mtch with existing colour of wall complete all as specified and as directed. |
| 130 | S & F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. |
| 131 | S & F for sheet metal enclosure MCCB INCOMER DB VTPN 6 way, IP-43 suitable for 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to mtch with existing colour of wall complete all as specified and as directed. |
| 132 | S & F MCCB four pole rated capacity 125 Amps, 415 Volts breaking capacity 16 KA complete all as specified and as directed. |
| 133 | Supply and fixing TPN 4 pole 40-63 Amps, 415V 10KA 'B' curve miniature circuit breaker MCB in the DB complete with connection testing and commissioning, complete all as specified and as directed |
| 134 | Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed. |
| 135 | (i) All as per Item No.134, above but of capacity SPN 32 Amp |
| 136 | (ii) All as per Item No. 134, above but of capacity SPN 40-63 Amp Please Enable Macros to View BoQ information |
| 137 | (ii) All as per Item No. 134, above but of capacity SPN 40-63 Amp Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender