Tender For Certain Misc Repair Of Office Bldgs, Air Crew Room, Tech Bldg, Hangers, Hard Standing And Connected Works At Avn Bde & Army Avn Unit Under Age B/R-I And Age E/M-I Of Ge 865 Ews
Tender Value
63.98 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
2 days left
EMD
1.21 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Misc Repair Of Office Bldgs, Air Crew Room, Tech Bldg, Hangers, Hard Standing And Connected Works At Avn Bde & Army Avn Unit Under Age B/R-I And Age E/M-I Of Ge 865 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone (laid flat or on edges) or brick, tiles in floors laid bedded and pointed in any mortar, complete all as specifed and/or as directed by Engr-in-Charge. |
| 2 | Demolition of cement concrete in ground floor and paving not exc 15 cm thick below or above ground level, complete all as specifed and/or as directed by Engr-in-Charge. |
| 3 | M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of floor, complete all as specifed and/or as directed by Engr-in-Charge. |
| 4 | M&L for sand filling (50 mm average thickness) under floors in foundation and laying interlocking paver blocks including watering and consolidation, complete all as specifed and/or as directed by Engr-in-Charge. |
| 5 | M&L for machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60 mm thickness M-35 grade, complete all as specifed and/or as directed by Engr-in-Charge. |
| 6 | M&L for machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment conforming to IS 15658-2006 of 80 mm thickness M-35 grade, complete all as specifed and/or as directed by Engr-in-Charge. |
| 7 | M&L for chequered cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments laid over 20mm thick cement screed base (1:6), complete all as specifed and/or as directed by Engr-in-Charge. |
| 8 | M&L for PCC (1:4:8) type D-2 using 40mm graded aggregate as in foundation, filling and mass concrete, complete all as specifed and/or as directed by Engr-in-Charge. |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specifed and/or as directed by Engr-in-Charge. |
| 10 | S&F MS rolled sections in main and cross beams, hip and jack rafters; purlins where connected to common rafters running rails and guids for sliding doors; fixed with angle cleats or other connecting plates and similar work conforming to Fe-290, Gde-E-165, complete all as specifed and/or as directed by Engr-in-Charge. |
| 11 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm in width or girth, complete all as specifed and/or as directed by Engr-in-Charge. |
| 12 | Dismantling plain or corrugated steel / fibre sheeting any guage thickness including nanital or similar pattern, complete all as specifed and/or as directed by Engr-in-Charge. |
| 13 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering / cladding to wall fixed with self tapping screws, complete all as specifed and/or as directed by Engr-in-Charge. |
| 14 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering / cladding to wall fixed with self tapping screws, complete all as specifed and/or as directed by Engr-in-Charge. Note : Cut horizontally into two equal parts. |
| 15 | Dismantling plain fillets square, rectangular or triangular in section, clean sawn fillets, rails, posts purlins etc. under 40 sqcm in section secured with nails or brads unframed work, complete all as specifed and/or as directed by Engr-in-Charge. |
| 16 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc. 13 sqcm and not exc. 25 sqcm in section, complete all as specifed and/or as directed by Engr-in-Charge.(Refer Srl item No 02). |
| 17 | M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws, complete all as specifed and/or as directed by Engr-in-Charge. |
| 18 | Dismantling wall and ceiling boards (fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, complete all as specifed and/or as directed by Engr-in-Charge. |
| 19 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding, complete all as specifed and/or as directed by Engr-in-Charge. |
| 20 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling panelling, shelves/boarding, complete all as specifed and/or as directed by Engr-in-Charge. |
| 21 | Dismantling boarding / wooden flooring of any description, fixed in any positon, complete all as specifed and/or as directed by Engr-in-Charge. |
| 22 | M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated, including backing with thermocol sheets or as specified by manufacture including dismantling, complete all as specifed and/or as directed by Engr-in-Charge. |
| 23 | Dismantling floor, hearth or wall tiling including wall cement mortar bedding (But not backing ) and rubbish off premises, complete all as specifed and/or as directed by Engr-in-Charge. |
| 24 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with over the screed bed with CM (1:6) 15 mm thick laying floor tiles, complete all as specifed and/or as directed by Engr-in-Charge. |
| 25 | M&L for glazed (coloured) ceramic tiles of size 350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick, as on vertical surfaces, over 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc. to match with the shade of tiles, complete all as specifed and/or as directed by Engr-in-Charge. |
| 26 | S&F in repair one piece EWC with built in cistern vitreous china wash down water closet (Pedestal), white (EWC) including plastic seat of same colour of WC, closed patttern with flat bottom and cover and mild steel chromium plated hinging device complete with flushing cistern, complete all as specifed and/or as directed by Engr-in-Charge. |
| 27 | S&F in repairs vitreous china squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with PCC type B-1, 1:2:4, using 20 mm graded crushed stone aggregate, complete all as specifed and/or as directed by Engr-in-Charge. |
| 28 | S&F in repairs, 10 litres capacity PVC valveless symphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe, complete all as specifed and/or as directed by Engr-in-Charge. |
| 29 | S&F in repairs, 15mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends, complete all as specifed and/or as directed by Engr-in-Charge. |
| 30 | S&F in repairs fancy type 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specifed and/or as directed by Engr-in-Charge. |
| 31 | S&F 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule, complete all as specifed and/or as directed by Engr-in-Charge. |
| 32 | S&F toilet paper holder of brass, chromium plated or stainless steel, complete all as specifed and/or as directed by Engr-in-Charge. |
| 33 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specifed and/or as directed by Engr-in-Charge. |
| 34 | S&F in repairs soap dish chromium plated, complete all as specifed and/or as directed by Engr-in-Charge.. |
| 35 | S&F in repairs towel rail 600mm long chromium plated (minimum weight 190 gms), complete all as specifed and/or as directed by Engr-in-Charge. |
| 36 | S&F in repair CP floor gratings 150mm dia, complete all as specifed and/or as directed by Engr-in-Charge. |
| 37 | S&F in repair fancy type glass corner self with CP brackets etc., complete all as specifed and/or as directed by Engr-in-Charge. Make: Jaquar or equivalent as approved by GE. |
| 38 | Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store, complete all as specifed and/or as directed by Engr-in-Charge. |
| 39 | S&F 25 mm bore 3 layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stabilty for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fitting fixed complete to walls ,ceiling or floors, complete all as specifed and/or as directed by Engr-in-Charge. |
| 40 | Description all as per Srl item No 39.00 above but 32 mm bore pipe. |
| 41 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks inner and out white, two layers ISI marked (Cylindrical vertical, with closed top), hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (i.e. GI nipple etc.), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store exc. 500 and not exc. 1000 ltrs capacity, complete all as specifed and/or as directed by Engr-in-Charge. |
| 42 | S&F rotational moulded polyethylene puff tank water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres including all accessories, Including dismantling of water tanks and remove to store, complete all as specifed and/or as directed by Engr-in-Charge. |
| 43 | S&F 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule, complete all as specifed and/or as directed by Engr-in-Charge. |
| 44 | PVC (SWR) 'S’ trap of 125/110 mm bore, complete all as specifed and/or as directed by Engr-in-Charge. |
| 45 | S&F 75mm bore PVC (SWR) pipe single socketed having compressive strength 655 - 675 Kg/Cm2, in any length with rubber joints fixed to walls including taking down, complete all as specifed and/or as directed by Engr-in-Charge. |
| 46 | S&F 75mm bore PVC (SWR) pipe bends, complete all as specifed and/or as directed by Engr-in-Charge. |
| 47 | S&F PVC reducer of 110mm dia, complete all as specifed and/or as directed by Engr-in-Charge. |
| 48 | S&F PVC reducer of 75mm dia, complete all as specifed and/or as directed by Engr-in-Charge. |
| 49 | S&F PVC (SWR) single junction (Single T) of 75mm dia, complete all as specifed and/or as directed by Engr-in-Charge. |
| 50 | S&F in repairs vitreous china wash basin white flat back size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe,complete all as specifed and/or as directed by Engr-in-Charge.Make : Jaquar, Cera or equivalent as approved by GE. |
| 51 | S&F in repair acrylic PVC bathroom cabinet of size 550 x 400 mm with openable shutter fixed with looking mirror of selected quality and with suitable shelves inside the cabinet of superior quality as approved and directed by Engr in Charge. |
| 52 | S&F in repair CP wall mixer 3-in-1 system with provision for bath telephone shower and overhead shower with bend pipe,complete all as specifed and/or as directed by Engr-in-Charge.Note : Cat Part SHFLR 5281 of Jaquar or in equivalent in Kohler/Cera. |
| 53 | S&F in repair brass CP shower rose 125mm size, with swivel joints any size including fixing to steel pipe or union, complete all as specifed and/or as directed by Engr-in-Charge. |
| 54 | S&F in repairs fancy type 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfy handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specifed and/or as directed by Engr-in-Charge. |
| 55 | S&F in repairs 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule, complete all as specifed and/or as directed by Engr-in-Charge. |
| 56 | S&F 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR pipe and fixed in repair, complete all as specifed and/or as directed by Engr-in-Charge. |
| 57 | S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs, complete all as specifed and/or as directed by Engr-in-Charge. |
| 58 | Demolition of precast concrete block walling built in cement mortar, complete all as specifed and/or as directed by Engr-in-Charge. |
| 59 | M&L for precast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate, complete all as specifed and/or as directed by Engr-in-Charge. |
| 60 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc., complete all as specifed and/or as directed by Engr-in-Charge. |
| 61 | M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4, complete all as specifed and/or as directed by Engr-in-Charge. |
| 62 | M&L for preperation of new plastered wall surface of any description and applying two coats of cement based paint over a coat of chalk whiting, complete all as specifed and/or as directed by Engr-in-Charge. |
| 63 | M&L for preparing old plasted surfaces of wall and applying two coats of distemper oil emulsion with complete removal of existing treatment, complete all as specifed and/or as directed by Engr-in-Charge. |
| 64 | M&L for 75 mm PCC 1:2:4 type B-1 using 20mm graded aggregate as plinth protection finished even and smooth without using extra cement, complete all as specifed and/or as directed by Engr-in-Charge. |
| 65 | M&L for forming contraction (dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specifed and/or as directed by Engr-in-Charge. |
| 66 | Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc., but excluding ashlars facings, dressed stonework, complete all as specifed and/or as directed by Engr-in-Charge. |
| 67 | M&L for walling random rubble, brought upto courses well bonded, bedded and solidly hearted, built in CM 1:4, complete all as specifed and/or as directed by Engr-in-Charge. |
| 68 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping, benching etc. including necessary weathering, throating etc. and including form works and set in cement motor 1:6, complete all as specifed and/or as directed by Engr-in-Charge. |
| 69 | M&L for reinforced cement concrete 1:2:4, nominal mix, type B1 (using 20 mm graded crushed stone aggregate) as in slab supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and shelves and the like etc. including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing demolished material to a distance and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specifed and/or as directed by Engr-in-Charge. |
| 70 | M&L for formwork to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar works (rough finished flat surface of concrete) nor exceeding 200 mm thick (horizantal or sloping), complete all as specifed and/or as directed by Engr-in-Charge. |
| 71 | M&L for formwork to edges of concrete flat not exc. 20 cm wide rough finished, complete all as specifed and/or as directed by Engr-in-Charge. |
| 72 | M&L for TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia), complete all as specifed and/or as directed by Engr-in-Charge. |
| 73 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area not exc 1.5 sqm each, complete all as specifed and/or as directed by Engr-in-Charge. |
| 74 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each, complete all as specifed and/or as directed by Engr-in-Charge. |
| 75 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc., complete all as specifed and/or as directed by Engr-in-Charge. |
| 76 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, including aluminium jali fixed in one side, side hung type without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges type B-21, 100mm long (02 Nos) suitable handle (01 No) etc., complete all as specifed and/or as directed by Engr-in-Charge. |
| 77 | S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4\\"X2½\\") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect, complete all as specifed and/or as directed by Engr-in-Charge. |
| 78 | S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specifed and/or as directed by Engr-in-Charge. |
| 79 | M&L sheet glass 5.5mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.50 sqm in each pane, complete all as specifed and/or as directed by Engr-in-Charge. |
| 80 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specifed and/or as directed by Engr-in-Charge. |
| 81 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specifed and/or as directed by Engr-in-Charge. |
| 82 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specifed and/or as directed by Engr-in-Charge. |
| 83 | S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specifed and/or as directed by Engr-in-Charge. |
| 84 | S&F in repair aluminium (die cast) body door closer hydraulically designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 kg, complete all as specifed and/or as directed by Engr-in-Charge. |
| 85 | S&F floor door stopper (length of cover plate) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor, complete all as specifed and/or as directed by Engr-in-Charge. |
| 86 | S&F 75mm long aluminium anodized, butt hinges of extruded section, complete all as specifed and/or as directed by Engr-in-Charge. |
| 87 | S&F 100mm long aluminium anodized, butt hinges of extruded section, complete all as specifed and/or as directed by Engr-in-Charge. |
| 88 | S&F100mm long mild steel butt hinges, medium weight cold rolled 100mm size, complete all as specifed and/or as directed by Engr-in-Charge. |
| 89 | S&F 8 mm thick fiber glass arcylic reinforced tranulent plain sheet fixed with screw/ rubber bedding etc., complete all as specifed and/or as directed by Engr-in-Charge. |
| 90 | Taking down carefully and refixing by mechanical means, steel hanger door shutters leaf of size 5.50x4.00m and keeping aside on the ground, repairing the parts/members of door, including minor repairs, welding as required greasing and removing unserviceable members, unserviceable CGI/PGI sheets, pully nut and bolts etc., complete all as specifed and/or as directed by Engr-in-Charge. |
| 91 | Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc. and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface, complete all as specifed and/or as directed by Engr-in-Charge. |
| 92 | Point wiring complete with 1.5 sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5 sqmm copper conductor cable as continuous earth lead, all as specified and directed for the followings:- |
| 93 | One light point/fan controlled by one way switch. |
| 94 | One switch socket outlet 6 Amps, 230 volts point on independent board. |
| 95 | One switch socket outlet 6 Amps, 230 volts point on same board. |
| 96 | All as per Srl item No 92.00 above, but using cables 4 sqmm size. |
| 97 | Supply and replacement of switch piano flush button single pole 6 Amps 230 volts one way, complete all as specifed and/or as directed by Engr-in-Charge. |
| 98 | Supply and replacement of switch socket outlet two in one 5 pin 6 Amps flush type 230 volts, complete all as specifed and/or as directed by Engr-in-Charge. |
| 99 | Supply and replacement of switch socket combination outlet multi purpose 5 pin 6 Amps and 16Amps 230 volts, complete all as specifed and/or as directed by Engr-in-Charge. |
| 100 | Supply and replacement of ceiling rose, surface bakelite three terminals, complete all as specifed and/or as directed by Engr-in-Charge. |
| 101 | S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 ways, complete all as specifed and/or as directed by Engr-in-Charge. |
| 102 | S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 08 ways, complete all as specifed and/or as directed by Engr-in-Charge. |
| 103 | S&F in replacement of MCB SPN 63 Amp 240 Volts AC ISI marked, complete all as specifed and/or as directed by Engr-in-Charge. |
| 104 | S&F in replacement of MCB SP 6-32 Amps 240 Volts 50 Hz, complete all as specifed and/or as directed by Engr-in-Charge. |
| 105 | S&F only in replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifed and/or as directed by Engr-in-Charge. |
| 106 | Supply and laying in replacement of XLPE insulated, armoured, haeavy duty electric cables with stranded aluminium conductor rating 1100 volts grade of size 16 sqmm 2.0 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old unserviceable cable covers, complete all as specifed and/or as directed by Engr-in-Charge. |
| 107 | S&F exhaust fan, steel body AC single Phase 230V of size 300mm sweep with, blades, and frame and louvers, complete all as specifed and/or as directed by Engr-in-Charge. |
| 108 | Taking down old unserviceable high bay light and supply and fix in replacement LED high bay light fitiing 150 watt 230 Volt AC outdoor type with high pressure die cast aluminium using and heat resistant complete with driver, lamp cracket with impact and corosion resistant including thermal management in multiple optics complete with IP65/66 protection at any height as per site condition (including provn of haydra as per site requriment), complete all as specifed and/or as directed by Engr-in-Charge. |
| 109 | M&L for sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4.00 sqmm 1100 volts grade and including non metallic rigid 25 mm dia PVC conduit caping with all fitting and fixing accessories and including PVC insulated unsheathed, multistranded copper conductor cable of size 4.00 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring, complete all as specifed and/or as directed by Engr-in-Charge. |
| 110 | M&L for sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 10 sqmm 1100 volts grade and including non metallic rigid 25 mm dia PVC casing caping with all fitting and fixing accessories and including PVC insulated unsheathed, multistranded copper conductor cable of size 10 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring, complete all as specifed and/or as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender