Tender For Special Repair And Addition Alteration To Bldg No P-9 (Partition Of 01 X Room With 02 X Att Bathroom) And Bldg No Et-2 And 3 Under Ge Saugor
Tender Value
48.30 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
8 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair And Addition Alteration To Bldg No P-9 (Partition Of 01 X Room With 02 X Att Bathroom) And Bldg No Et-2 And 3 Under Ge Saugor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Sep-2026 | Corrigendum No. 01 | Date | 12-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 2 | S&F roof trusses ( framed), trussed, purlin, crane gantries, rails and fastenings and heavy bracket framing (beams, tee, angle, channel or flat sections) including distance pieces, cleats etc (welded/riveting) conforming to Fe 410-W (Gde-E250) quality 'A' complete all as specified and directed. |
| 3 | S&F pre-painted galvalume sheet 0.50 mm thick having aluminium zinc coating 150 gsm/ sqm double ribbed trapezoidal profile / corrugated steel sheet any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete, complete all as specified and directed. |
| 4 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10cm width or girth including preparation of new steel surfaces complete all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) in ground floors and pavings (below or above ground level), n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 7 | M&L for 25mm thick PCC (1:2:4) type B-0 (using12.50mm graded stone aggregate) as in levelling course to sub base, finished surface rough to receive the tiles complete all as specified and directed. |
| 8 | M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundations/ mass concrete complete all as specified and directed. |
| 9 | M&L for 75mm thick PCC 1:3:6 type C-2, (using 40mm graded stone aggregates) as in plinth protection finishing surface even and smooth without using extra cement including providing construction joint (at an interval not more than 3.0m) and filled with bitumen and sand mortar in 1:3 complete all as specified and directed. |
| 10 | S&F 60mm thick Machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment, any shape and size confirming to IS- 15658-2006 of M-35 grade, laid on 50mm thick sand cushion complete all as specified and directed.Note: The cost of sand cushion shall be deemed included in quoted unit rates.Make: M/S MEHTAB TILES, M/s NITCO (NITCO), M/s SUPREME TILES (SUPREME) |
| 11 | M&L for Stone slabs and tiles of any description or thickness in floors, aprons etc., laid beded and pointed in any mortar and any description including removing rubbish off the premises complete all as specified and directed. |
| 12 | M&L for Non skid ceramic coloured tiles in floors etc, 7mm thick, area of each tiles exc 0.11 sqm but n'exc 0.18 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 13 | M&L for fully digital glazed ceramic coloured tiles on vertical surfaces, 8 to 10mm thick, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm (square/ rectangular), fixed with costra tile adhesive cosmic silvwe type 1T (EN-STD C1TE) over and including 10mm thick rendering in CM 1:4 as bedding layer complete all as specified and directed. |
| 14 | M&L for full body vitrified glaed ceramic coloured tiles in floors etc, 8 to 10mm thick, area of each tiles exc 0.36 sqm but n'exc 1.20 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 15 | All as per item 14 above but as in Dado/skirting fixed over and including 10mm thick rendering in CM (1:4). |
| 16 | M&L for machine cut Kota stone slab flooring 16-18 mm thick (size not less than 550mmX550 mm), laid over and including 20 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including required grinding rubbing & polishing so as to obtained mirror polished surface complete. all as specified and directed |
| 17 | M&L machine cut kota stone slab 18-20mm thick as in skirting, steps riser etc laid over 1and including 10mm thick plaster in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including required grinding, rubbing & polishing so as to obtained mirror polished surface complete all as specified and directed. |
| 18 | M&L for Mirror polishing on marble/ granite/ Kota stone work where ever directed to give high gloss finish including cleaning existing surface by light grinding of surface (if required) by any means complete all as specified and as directed. |
| 19 | M&L for 16 to 18mm thick Granite slab of any shade (table rubbed and polished), machine cut for floors / shelves in steps, jambs, pillars, window cills & cooking platforms laid over and including 15 mm thick cement mortar 1:4 bedding, pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs, complete all as specified and directed |
| 20 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 21 | M&L for Brick work with sub- class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed |
| 22 | M&L for Brickwork with sub- class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed |
| 23 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 24 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 25 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:4 mixed with and including liquid water proofing compound @ 200ml per 50 kg bag of cement complete all as specified and directed.Note : Water proofing compound shall be measured and paid separately in respective item of this BOQ as 'Supply only'' |
| 26 | Supply only liquid water proofing compound for mixing in cement mortar or PCC complete all as specified and directed.Note : (i) The WPC compound specified in any item of this BOQ or ordered by Engineer-in-charge (if not mentioned in BOQ item but technically required shall only be measured and paid under this item.(ii) Contractor shall provide purchase vouchers for full quantities incorporated in the work and Engineer-in-charge shall keep defaced purchase vouchers in record and entered the same in MB |
| 27 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling by fully automatic airless spray machine as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 28 | M&L for complete removal of existing treatment using mechanical scrapping machine and applying two coats of cement base wall care putty by fully automatic airless spray machine in two coats @ 1Kg/Sqm (0.5Kg in each coat) on of wall/ceiling surfaces as preparatory work to painting including removing of nails, making good holes, cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 29 | M&L for applying two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall by fully automatic airless spray machine complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions |
| 30 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer by fully automatic airless spray machine on prepared surfaces of wall/ceiling complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass, joinery, electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 31 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder |
| 32 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm single sideprelam colour PVC sheet, reinforced with M.S. Square tube including painting edges to match with prelam sheet, fixed in opening as per specification & drawing complete all as specified and directed. |
| 33 | S&F Factory made 30mm thick (stiles), Solid PVC Moulded Door Shutter with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixed in frame at site as per specification & drawing complete all as specified and directed. |
| 34 | S&F100mm long stainless steel butt hinges, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 35 | S&F 200mm long stainless steel barrel tower bolt, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 36 | S&F 150mm size stainless steel handle, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 37 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. |
| 38 | M&L for aluminium work with powder coated aluminium sections as in glazed door (frame and shutters), any No of Panels, openable both side on pivot arrangment (Floor door spring and pivot set), glazing with 4.8 mm thick plain/ ordinary sheet glass fixed with rubber gasket and aluminum glazing clips, 2x Stainless steel Handle, locking arrangment, 01x Tower bolt and fixed in position with adiquate Number of fastners/ hold fast including cutting holes in wall/floor and making good (if required) complete all as specified and directed.Aluminium sections shall be powder coated and of folllowing sizses:- (A) FRAME :(i) Rectangular tube section 100x44x1.60 to1.8 mm thick(B) SHUTTERS(i) Styles 85 x 44.45 x 3mm thick section No- 4526(ii) Top rail 95.25 x 44.45 x 1.7 mm thick section No-4553 (iii) Middle/lock rail 83.50 x 44.45 x 1.7 mm thick section No-4565(iv) Bottom rail 114.3 x 44.45 x 2.82 mm thick section No-4529(v) Glazing clip 0.70 mm thick section N0-4407(vi) Handle: Stainless steel handle 200mm long of aproved design and pattern (vii) Tower bolt: 9.90 mm dia sheet and section Ano-40027, 200 mm long(viii) Mortic lock: 100 mm size 4 lever. Make : GodrejNote : (i) Floor door spring and pivot set shall be measured and paid seperatly. |
| 39 | S&F powder coated aluminum glazed window, three track-sliding type using 1.80 mm thick aluminium open sections of size 83x44mm for style & top rails, 100x44mm for bottom rails, glazed with 5mm thick plain sheet glass and stainless steel wire mess of dia 0.36mm and aperture 1.4mm, including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings etc complete all as specified and as directed. Note-Cost of glass and gauge shall be deemed included in quoted unit rates. |
| 40 | S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40x1.5 mm, half portion shall be fixed with 4mm thick frosted glass and half portion will be fixed with louvers having 4mm thick frosted glass fixed with and including rubber gasket, aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion including necessary cutting holes on wall and fixing arrangements complete all as specified and directed. |
| 41 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 42 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 43 | M&L for Putty/POP work in multi layer (total thickness not less than 10mm) as in plaster of Paris (gypsum board) false ceiling of any shape (Square/Circular/Semi circular etc), design and pattern as approved by Engr-in-Charge including required GI frame work and Fibre mesh/ reinforcement (Horizontal & Vertical) fixed properly with walls/ceiling as per manufacturer's instructions, finishing Putty/POP surface even and smooth, painting two or more coat with Premium quality plastic emulsion paint over one coat primer over smooth finish POP surface, making provn for spot lighting/ceiling light as required and all other accessories/fixture/ material required to complete the job in all respect as specified and directed by Engr-in-Charge.Note : (i) The work may be executed up to a height of 5.00 m above floor level.(ii) light fittings and wiring work shall be measured and paid separately. |
| 44 | S&F in repair 25mm dia stainless steel (202 Grade) curtain rod not less than 0.70mm thick with decorative end caps (Latoo) and brackets complete all as specified and directed.Note : In openings exceeding 1.2m wide, additional brackets shall be provided so as the distance between two consecutive brackets shall not exceed 1.2m. |
| 45 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.Note : Stainless steel hydraulic floor spring & top pivot shall be sufficient to operate for the glass doors with weight of 120-150 Kg doors. |
| 46 | M&L for 20 mm outer dia CPVC pipes, SDR 11 grade including fittings on walls/ceiling or laying in floors including taking down existing tubing of any description complete all as specified and directed.Note : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 47 | M&L for refixing GI tubing 20mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 48 | M&L for GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 49 | M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, girth not exc 10 cm complete all as specified and directed. |
| 50 | S&F Vitreous china Table Top Basin, Size: 425x340x175 mm, white, Including with Waste coupling 32mm Size Half Thread with 130mm Height ,waste pipe, pvc connections and Single Lever Tall Boy with 190mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses with required accessories complete all as specified and directed.Note : Pillar tap/mixer and PVC connection will be measured paid separately.Make : Jaquar (Cat Part No CNS-WHT-903-Basin), Cat Part No ALD CHR -709L130-waste), (Cat Part No FUP-CHR-29005BPM-mixer) |
| 51 | S&F Rimless & Siphonic, Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories and Accessories Set, Size: 365x680x740 mm with 220 mm S-trap / Size: 370x665x730 mm with 300 mm S Trap including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Essco (Cat Part No CNS-WHT-853S220SPPSMY/CNS-WHT-853S300SPPSMY) or equivalent in Hindware / Johanson/ Parryware |
| 52 | S&F Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer), chromium plated with required accessories complete in all respect including taking down existing Hand Shower of any description, as specified and directed.Make Jaquar (Cat Part No ALD-CHR-577) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 53 | S&F 15mm bore dia CP Exposed part kit concealed stop cock & flush cock with fitting sleeve, Operating lever & Adjustable wall flange with seal, incl Regular concealed Stop Cock Cold Only Suitable for 15mm Pipeline with Protection Cap including taking down existing stop cock of any description, complete in all respect as specified and directed. Make : Jaguar ( Cat Part No.: exposed part : FUP-CHR-29083KPM , concealed part : ALD-083R, ALD-083L/ ALD-089R/ ALD-089L/ALD-081) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 54 | S&F Bib cock with wall flange, chromium plated, including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No FUP-CHR-29037PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 55 | S&F 15mm bore 2 Way Bib Cock with Wall Flange chromium plated including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar-(Cat Part No FUP-CHR-29041PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 56 | S&F Wall Mixer 3-in-1 System, chromium plated, with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) screwed down for 15mm bore iron pipe including taking down existing mixer /taps of any description complete all as specified and directed.Make : Jaquar ( Cat Part No FUP-CHR-29281PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 57 | S&F in repair 15mm bore dia Single Lever Tall Boy with 190mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses complete in all respect including taking down existing tap of any description, as specified and directed. Make : Jaquar (Cat Part No -FUP-CHR-29005BPM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 58 | S&F Angular Stop Cock with Wall Flange, chromium plated with required accessories including taking down existing tap of any description, complete in all respect as specified and directed. Make : Jaquar (Cat Part No FUP-CHR-29053PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 59 | S&F Overhead Shower 120X120mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body) with Rubit Cleaning System and Shower Arm Casted 160mm Long Light Body Round Shape for Wall Mounted Showers with Flange , chromium plated, fixed to pipe including taking down existing shower rose and arm of any description complete all as specified and directed.Make : Jaguar ( Cat Part No.: Shower : OHS-1667 , Arm : SHA-477) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 60 | S&F rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank (any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 61 | S&F in repair 15mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe complete all as specified and directed. |
| 62 | S&F Stainless steel (Grade 304) rectangular floor/marble insert shower channel drain size 450mm x 100mm x 30mm jointing with solvent cement etc complete all as specified and directed. |
| 63 | S&F Single leaf panic bar metal Fire door with all accessories (Frame 100x50x1.5mm,Shutter 46mm made from 2nos 1mm thick GI Sheet with infill of Honeycomb/Rockwool. Hinges 4nos SS 304 Fire rated UL Listed, Door Closer 80kg UL Listed Std. Arm. Fire rated, 1 Vision Panel 300x300x6mm Schott/Keralite Fire rated along with Gaskets, Single Point Panic Bar with Trim and Installation of doors as per ground complete all as specified and directed by engg-in-charge. |
| 64 | S&F 100mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors including taking down existing pipe of any description complete all as specified and directed. |
| 65 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors including taking down existing pipe of any description complete all as specified and directed. |
| 66 | S&F PVC (SWR) bends, 110 mm bore dia with access door complete all as specified and directed. |
| 67 | S&F PVC (SWR) bends, 75 mm bore dia complete all as specified and directed. |
| 68 | S&F 110mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius , with access door, complete all as specified and directed. |
| 69 | S&F 75 mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius, complete all as specified and directed. |
| 70 | S&F repair 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 71 | S&F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified and directed.. |
| 72 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 73 | Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed. |
| 74 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. |
| 75 | Returning filling in excavated material including spreading, levelling, watering and well ramming in layer n.exc 25 cm thick complete all as specified and directed. |
| 76 | Removal of excavated material (soil) to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 77 | M&L for rounding to the edge of stone slabs one edges such as in steps, cooking platform and other similar situations complete all as specified and as directed. |
| 78 | Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 79 | Taking down main switch, DB/Change over/VTPN, AC box from wall/ wooden board etc , any description and any capacity with MCB(s) / MCCB(s) including disconnection of electric connections complete all as specified and directed |
| 80 | M&L for concealed point wiring for one light point or fan/exhaust point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size modular metal boxes with cover plate along with frame for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description of wiring cable complete all as specified and directed. Note:-(i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge .(ii) Cutting, chasing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before. |
| 81 | All as per item No. 80 above but point wiring for one 5 Amp socket point on independent board controlled by one switch and with 2.5 Sqmm wiring cable. |
| 82 | All as per item No. 80 above but point wiring for one 3 pin ,5 Amp socket point on the same board with other switch and 2.5sqmm wiring cable. |
| 83 | All as per item No. 80 above but point wiring for 15/16A socket outlet with 2.5 Sqmm wiring cable. |
| 84 | S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed. |
| 85 | S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed. |
| 86 | S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 87 | S&F socket outlet modular 6/16 Amp, 5/6 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 88 | S&F ceiling rose, surface backlit, three terminal complete all as specified and directed. |
| 89 | S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 90 | S&F modular fan step regulator 60/80W, 2 module complete all as specified and directed. |
| 91 | S&F Tube light fitting 20/18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directedMake : Havells - Cat no LHEXAPP7PN1W020/ Bajaj - Beam Pro Batten 830412 Philips -Ujjwal/ slim line Batten 919515814053 Orient - LBLN -18-C-SQ |
| 92 | S&F box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.Make : Havells - Cat Part No LHEXBLP7IN1W009 or eqvt in bajaj cat part No BCLSB10WH/ CG Cat Part No LCTL-9-CDL |
| 93 | S&F in repair 2' X 2' ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for Armstrong/grid ceiling complete all as specified and directed. Make : Havells - cat no. PLANO2X2PLR36WLED840S or equivalent of Bajaj / Philips / CROMPTON |
| 94 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver, holder & connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make : Havells - cat no RUGBYGENXFTS10WLED865SSYMBOPC / Bajaj - BIBWP10WLED /Orient - LIBHP-10-C |
| 95 | S&F LED bulb 9/10 watt suitable for angle / batten holder fitting complete all as specified and directed.Make\\" havells/ Philips/Bajaj |
| 96 | Disconnection all electric connections and taking down carefully existing ceiling fan (any description and size and capacity), keep in safe custody or deposited to AGE E/M store yard as directed by Engg-in-charge and refix in the same location or in other location as directed including making electrical connections before completion of work and necessary testing complete all as specified and directed.Note : For re - installation ceiling fan, the contractor shall provide brand new PVC flexible 1.0 Sqmm twin core cable of required length and cost of these items and other miner items required (like insulation tap, screws/ nails, nut. bolt, washers, locking pin, rubber real, hanging clamps etc ) shall be deemed included in quoted unit Rates. |
| 97 | S&F ceiling fans with brushless direct current motor (BLDC),1200 mm sweep, 230 V, 5 star rated, having minimum air delivery 210 CFM with service value 6.00 BEE along with remote control, canopy, down road (not les than 250mm), hanging clip, rubber real, nut bold and washer, locking pin, connecting cable etc) including taking down existing ceiling fans of any description, type a and size including disconnection of electric connections and deposited to AGE E/M store yard complete all as specified and directed.Make : Havells Modle-Festiva Prime BLDC / Crompton: Model-Energion Groove Regulator/ equivalent make in bajaj / Philips |
| 98 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300MM including taking down existing exhaust fans of any description, type and size including disconnection of electric connections and deposited to AGE E/M store yard complete all as specified and directed.Make : Havells Model -Thrill Air DX HS / Crompton: model- BRISK AIR NEO /equivalent make in bajaj / Philips |
| 99 | M&L surface sub main wiring with two single core 6.0 Sqmm PVC FRLSH insulated unsheathed stranded copper cable (Phase & neutral) and one single core cable of same description as continuous earth wire, drawn in & incl medium grade, ISI marked PVC conduit/ casing-n-caping of suitable size (not less than 20mm dia) with all accessories (such as tee, bend, joint cover, round / square blocks at junctions as required) complete all as specified and directed.Note: (i) Proper colour coding of wiring cables (as approved by Engg-in-charge) shall be used/ ensured(ii) Two runs of single core cable (Phase and neutral) and one run of single core cable (earth continuity conductor) & one run of PVC casing -n-capping/pvc conduit shall be measured as one unit length. |
| 100 | S&F in repair modular sheet metal enclosure (AC Box) with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket, and one No MCB, SP, 20 Amps, 230 Volts, 10KA 'C' series, flush mounting complete all as specified and directed. |
| 101 | Supply and fixing LED street light fitting 70 watt/35 watt, 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including taking down old light fitting complete all as specified and directed.Make : Havells - cat no. ENDURASUNDOWNSL70WLED765PASYBOPC or equavalent of Bajaj/ Philips/ CRMOMPTON |
| 102 | M&L for GI pipe bracket of size 40 mm dia light grade of length not less than 1.5 Mtr long and bent to a shape incl fixing wall with 02 Nos MS clamp made of flat iron (min 40x5mm) of suitable size incl nut bolt and washers complete all as specified and directed.Make : Jindal/ TATA/ Surya Prakash. |
| 103 | S&F MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 104 | S&F MCB SPN 240 volt 40 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 105 | S&F MCB SP 240 volt 63 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 106 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8way, 240 V with 200 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 107 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8way, 240 V with 200 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender