Tender For Shifting Diversion And Re Erectioon Of Existing 11 Kv Oh Line And Ltoh Line From Bhutasarasingi To Budhambo Road
Tender Value
15.11 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
7 days left
EMD
15200
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Shifting Diversion And Re Erectioon Of Existing 11 Kv Oh Line And Ltoh Line From Bhutasarasingi To Budhambo Road
BOQ
| Sl. No. | Item Description |
| 1 | PART - I. Estimate and cost of materials for Shifting and Re-erection of existing 3P, 3W 11KV HTOH lines with 55mmsq AAAC over 14Nos. 11Mtr. long 160X152MM WPB GI poles and over 01No. l0Mtr. long 330Kg. PSC pole = 0.9Ckm. and 01No. road crossing guarding with dismantling of l3Nos. HT RS Joist poles and 01No. PSC Poles. - 10mtr long 330kg PSC pole |
| 2 | (160X152)mm 11Mtr Long WPB G.I pole |
| 3 | Earthing Of Support (Coil Type) |
| 4 | RCC Base plate for support |
| 5 | 55mm2 All Alloy Aluminum Conductor.AAAC |
| 6 | PG clamp for 55mm2 AAA conductor |
| 7 | I1KV V Cross arm (10.2 Kg ) GI |
| 8 | GI Back Clamp for V Cross Arm (0.85 Kg ) |
| 9 | 11 KV F clamp 2.9 Kg |
| 10 | Top Bracket 100X50mm GI channel (02 Kg each) |
| 11 | 100X50X6mm. MS Channel for straight cross arm (1.2m X 8 pcs)on each pole (9.2Kg/mtr.) for tapping & cut point pole+ Galvanisation charges |
| 12 | 11KV Disc insulator (T& C) 45 KN, Polymer |
| 13 | 11KV H/Wfitting (T & C) type ,45 KN |
| 14 | 11KV Pin insulator Polymer |
| 15 | H.T Stay set (Complete) |
| 16 | Stay Insulator |
| 17 | Stay clamp or Stud Clamp |
| 18 | 7/10 SWG stay wire |
| 19 | No.6 G.I wire for (Dia-4.8mm)(0.182Kg/mtr) Guarding |
| 20 | to.8 G.I wire for cross lacing(0.l31Kg/mtr) |
| 21 | to.10 G.I wire for cross lacing binding (0.08Kg/mtr) (2F/lacing * 40 /3.28) for Guarding) |
| 22 | No.6 G.I wire for Guarding earthing |
| 23 | 75X40X6mm. MS Channel for straight cross arm (1.6m X8 pcs) (6.8Kg/mtr.) + Galvanisation charges for 01Nos. Guarding |
| 24 | Eye hook |
| 25 | G.I Pipe Earthing 40mm Dia medium gauge 3mtr long for Earthing device for guarding |
| 26 | Danger Board |
| 27 | GI Clamp for Danger Board GI Flat(25X3 80.6 Kg/Mtr) mm length(0.306 Kg/Piece) |
| 28 | G I Barbed Wire anticlimbimg device 3. kg per support |
| 29 | GI clamp for anti Climbing Devicev25X3 mm Flat (0.6 Kg/Mtr) Flat of 0.510 Mtr Length |
| 30 | G I Nut,Bol & washer |
| 31 | Sundries to complete the job etc |
| 32 | Stay/Strut Pole concreting in ratio 1:2:4 (0.5x0.5x0.8) =0.2Cu.mtr . |
| 33 | Concreting of poles in ratio 1:1.5:3 (500mmX500mmX l800mm) = 0.45Cu.mtr (llmtr WPB/RS Joist/H Pole) |
| 34 | Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1660mm) = 0.415Cu.mtr (l0mtr PSC/RS Joist Pole) |
| 35 | Couping of poles in ratio 1:1.5:3 = 0.1125 Cu.Mtr |
| 36 | Materials for masonary work for earth pit Charcoa1,saIt etc for earthing of guarding |
| 37 | Instaling of 11KV 10Mtr PSC pole = 01No. RS Joist Pole Nos. And 55mmsq AAAC = 0.56Ckm. |
| 38 | PART -II:- Estimate and cost of materials for Shifting and Re-erection of 11KV line poles over 04Nos. 10Mtr. long 330Kg. PSC pole & 02Nos. road crossing guarding with dismantling of 04Nos. HT PSC Poles. - 10mtr long 330kg PSC pole |
| 39 | Earthing Of Support (Coil Type) |
| 40 | RCC Base plate for support |
| 41 | 11KV V Cross arm (10.2 Kg ) GI |
| 42 | GI Back Clamp for V Cross Arm (0.85 Kg ) |
| 43 | 11 KV F clamp 2.9 Kg |
| 44 | 11KV Pin insulator Polymer |
| 45 | No.6 G.I wire for (Dia-4.8mm)(0.182Kg/mtr) Guarding |
| 46 | No.8 G.I wire for cross lacing(0.131Kg/mtr) |
| 47 | No.10 G.I wire for cross lacing binding (0.08Kg/mtr) (2F/lacing * 40 /3.28) for Guarding) |
| 48 | No.6 G.I wire for Guarding earthing |
| 49 | 75X40X6mm. MS Channel for straight cross arm (1.5m X8 pcs) (6.8Kg/mtr.) + Galvanisation charges for 01Nos. Guarding |
| 50 | G.I Pipe Earthing 40mm Dia medium gauge 3mtr long for Earthing device for guarding |
| 51 | Eye hook |
| 52 | Danger Board |
| 53 | GI Clamp for Danger Board GI Flat(25X3 80.6 Kg/Mtr) mm length(0.306 Kg/Piece) |
| 54 | G.I Barbed Wire anticlimbimg device 3. kg per support |
| 55 | GI clamp for anti Climbing Devicev25X3 mm Flat (0.6 Kg/Mtr) Flat of 0.510 Mtr Length |
| 56 | G I Nut,Bol & washer |
| 57 | Sundries to complete the job etc |
| 58 | Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1660mm) = 0.415Cu.mtr (10mtr PSC/RS Joist Pole) |
| 59 | Couping of poles in ratio 1:1.5:3 = 0.1125 Cu.Mtr |
| 60 | Materials for masonary work for earth pit Charcoa1,saIt etc for earthing of guarding |
| 61 | Dismentaling of 11KV 10 Mtr PSC Pole= 04 Nos |
| 62 | PART -III:- Shifting and Re-erection of LTOH line by using (3X50+1X35+1X16)mmsq AB Cable over 07Nos. 9Mtr. long RS Joist poles over 01No. 09Mtr long 300Kg. PSC poles =0.28Ckm. with dismantling of LT RS Joist poles = 07Nos. & PSC pole = 01No. and LT AB Cable = 0.28Ckm. - 9Mtr long 300Kg PSC Pole |
| 63 | 116X100mm RS joist (09 Mtr1ong)23.0kg/Mtr (Each 207kg) |
| 64 | Lt Stay Set |
| 65 | LT Stay Insulator |
| 66 | LT Stay Clamp (1.4 Kg/pair) |
| 67 | 7/10 SWG Stay Wire Grade-2 |
| 68 | AB CABLE (3X50+1X35+1X16) MMSQ |
| 69 | RCC Base plate for support |
| 70 | GI Base plate for support 20Kg for PSC pole |
| 71 | Earthing Of Support (Coil Type) |
| 72 | LT Distribution Box Polycarbonate |
| 73 | Pole clamp for eye hook for XLPE /AB Cable |
| 74 | Conductor dead end clamp for bare massenger XLPE / ABC (25-70 sqmm) |
| 75 | Suspension clamp with eye hook for ABC |
| 76 | Eye hook for conductor dead end clamp |
| 77 | Insulated Piercing connector Type A main 16 to 95 sqmm to tap - 16 to 95 sqmm |
| 78 | Insulated Piercing connector Type B main 16 to 95sqmm to tap - 2.5 to 10 sqmm |
| 79 | Neutral connector Type B suitable for main 35-70 sqmm AAAC & TAP -2.5 to 10 sqmm service cable cover by black weather resistant insulation cover |
| 80 | GI Bolts Nuts and washers |
| 81 | Sundries for danger board,anti climbing devrce etc. |
| 82 | Stay concreting in ratio 1:2:4 (0.5x0.5x0.8)mtr .(a) |
| 83 | Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1500mm) = 0.37SCu.mtr(b) |
| 84 | Couping of poles in ratio 1:1.5:3 (500X500X475)= 0.11875 C mtr |
| 85 | Dismantaling of LT PSC pole= 01No, RS Joist pole = 07Nos. and LT AB Cable = 0.28ckm(07-Spans) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender