Tender For Repair To Compound Wall, Fencing, Gates And Rolling Shutters And Connected Works At Afs Hakimpet Under Ge (Af) Hakimpet (Tender Id No. 2026_Mes_789167_1)
Tender Value
24.99 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
11 days left
EMD
49980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Compound Wall, Fencing, Gates And Rolling Shutters And Connected Works At Afs Hakimpet Under Ge (Af) Hakimpet (Tender Id No. 2026_Mes_789167_1)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick or stone/ boulder built in cement mortar complete all as specified and as directed. |
| 2 | M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm type B-1 (1:2:4) set in cement mortar 1:4 (20mm graded aggregate) in width and setting in mortar, complete |
| 3 | Material & labour walling of random rubble masonry uncoursed, well bonded, bedded and solidly hearted in cement mortar 1:6 etc Complete all as specified and as directed |
| 4 | Material and labour PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in copings completed all as specified and as directed |
| 5 | Labour only for Raking out joints/ pointing to random rubble uncoursed/ coursed or brought up to courses built in cement mortar completed all as specified and as directed |
| 6 | M & L for raised pointing/ rubbed / V pointing to random or polygonal rubble, coursed or brought upto courses in cement mortar 1:4 complete all as specified and as directed |
| 7 | Supply only sand (river sand) for filling in firing range complete all as specified and as directed |
| 8 | M&L for filling saw dust mixed with river sand in specified proportion (1:1) as directed by engineer in charge and complete filling in stop butt areas including removal of existing material/ filling in stop butt complete all as specified and directed. Note: River sand shall be measured and paid separetely under relevant item |
| 9 | M & L for excavation upto 600mm depth of existing sand and saw dust mix in Small Arm Range area and screening with proper size of screener to remove the complete foreign material and placing the screened sand and saw dust mix obtained from excavation including levelling and compaction complete all as specified and as directed |
| 10 | M & L in repair providing pre cast cement concrete louvres and jallies, 35mm thick (measured solid) Type BO (1:2:4), (12.5mm graded stone aggregate) set in CM 1:4 , complete all as specified and directed |
| 11 | M & L 16-18mm Granite (of any type) work (table rubbed and polished in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) us ing marble dust with admixture of pigment to match with shade of granite. |
| 12 | M & L 2mm thick Fibre glass reinforced translucent plain sheeting of any colour as in gates/cladding etc complete all as specified and directed |
| 13 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed |
| 14 | M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed |
| 15 | Dismantiling of mild steel work of any description not other wise provided for completed all as specified and as directed. |
| 16 | S&F MS Angle/ flate iron/chanel framed work such as iron gate, ladder, SWT frame, grills, gratings, framed guard bars, etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165 completed all as specified and as directed |
| 17 | Dismantling expanded metal, chain link fencing or mesh any type or thickness not exc , fixed with steel or wood fillets, if any completed all as specified and as directed |
| 18 | S&F welded steel wire fabric to angle iron frame not exc 4 Kg weight per square metre completed all as specified and as directed |
| 19 | Dismantling fencing post/struts (steel/ RCC/wooden) of any section including taking out embedded portion and making good disturbed ground, post embedded in cement concrete/natural ground Complete all as specified and as directed |
| 20 | Material & labour for MS angle iron conforming to Fe- 290(Gde E 165) as in fencing post Complete all as specified and as directed |
| 21 | M&L for Two coats of synthetic enamel paint over one coat of red oxide including preparation surface Complete all as specified and as directed |
| 22 | Excavating in post holes in hard/dense soil not exc. 0.50 cum and getting out, return filling and removing surplus soil to a distance not exc. 50 mtrs and making good disturbed ground Complete all as specified and as directed |
| 23 | Material & labour for PCC 1:2:4 type B2 ( using 40 mm graded aggregate) for angle iron post Complete all as specified and as directed |
| 24 | Supply ony Chain link of size MS galvanised fencing any size or type Complete all as specified and as directed |
| 25 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard, rails, straining bolts etc., including provision of binding wire Complete all as specified and as directed |
| 26 | Material & labour for Mild steel round bars 10 mm dia and over, cut to length, bent to required shape including cranking, hooking ends and securing with welding with 10 cm overlaping between two bar all as specified and directed by Engineer-in Charge as in in reinforcement. |
| 27 | Material & labour for Flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 290(Gde E 165) Complete all as specified and as directed |
| 28 | Supply & fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10cm long and dia of neck 11 to 15 mm Complete all as specified and as directed |
| 29 | S & F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 90mm to 110mm spacing and straing and fixing to any type of standard rails straining bolts, incluing securing or typing a crossings with an provision of galvanize mild steel wire, staples or steel pins, etc all as directed (each line wire to be measured) in repairs completed all as specified and as directed |
| 30 | S&F in repair galvanised steel concertina coil razor type 450mm dia all as specified and directed |
| 31 | Demolition of cement concrete (unreinforced) of any description and in any position and disposed off to a distance exc. 50 mtrs and not exc. 250 mtrs all as directed by EIC. |
| 32 | M&L hard core of gauge n. exc 63 mm deposited, spread , traveled in layer, waters, water and rammed to a true surface complete all as specified and as directed |
| 33 | M&L PCC 1:3:6, type C-1 (40 mm graded agg ) for plinth protection 75 mm thick, finished without using extra cement complete all as specified and as directed |
| 34 | Dismantling of stone slabs of any description or thickness in floors and approns etc, laid ,bedded and pointed in any mortar all as specified and directed. |
| 35 | M&L for 25-50mm thick sand cushion in flooring below interlocking tiles complete all as speified and as directed . |
| 36 | M&L machine pressed precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS-15658- 2006 of 60 mm thickness M-40 grade with gray cement complete all as specified and as directed |
| 37 | M&L Cement concrete type D2 1:4:8 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed |
| 38 | M&L for screed bed or bedding layer in CM 1:6 for laying of floor finish complete all as specified and as directed |
| 39 | M&L Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set ionted and pointed in neat cement slurry colour to match in floors complete all as specified and as directed |
| 40 | M&L PCC 1:2:4, type B1 (40 mm graded agg) for 75 mm thick path/ flooring without using extra cement complete all as specified and as directed |
| 41 | Removing excavated material/soils / Debris to a distance exc. 500 mtrs and not exc.1500 mtrs, depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and as directed |
| 42 | M&L for broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed completed all as specified and as directed |
| 43 | M&L for Providing servicing/ greasing to Steel rolling shutters where ever directed and specified, servicing/ greasing to all parts of a rolling shutter including guide channels, hood covers, gear rods, laths, lock rails, bearings, chains and other connected parts of all types of rolling shutterts, taking down the rolling shutter in any postion and any type where ever directed by Engineer In charge and caaryout the repairs/ servicing / greasing and making into smooth operational condition as directed by Engineer In charge, top cover, anchoring rod, hasp and staple erected in same position or any other openings as indicated and as directed, in repairs complete all as specified and as directed |
| 44 | M&L for Steel rolling shutters, Thickness of laths 1mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, in repairs complete: push pull or manual type complete all as specified and as directed |
| 45 | M&L for Safety lever locks mild steel with 4 levers for rolling shutters in repairs complete: push pull or manual type complete all as specified and as directed |
| 46 | M&L for Ball bearing for rolling shutters in repairs complete: push pull or manual type complete all as specified and as directed |
| 47 | S & F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender