Tender For Erection Of 11 Kv Line & 11/0.4 Kv Sub-Station For Release Of Ag General Connection(2018)(Pr. No 49 -246) Under Sub-Division O&M Fatehgarh, Jaisalmer Circle On Labour Rate Contract (2025)
Tender Value
24.93 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
3 days left
EMD
49860
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Erection Of 11 Kv Line & 11/0.4 Kv Sub-Station For Release Of Ag General Connection(2018)(Pr. No 49 -246) Under Sub-Division O&M Fatehgarh, Jaisalmer Circle On Labour Rate Contract (2025)
BOQ
| Sl. No. | Item Description |
| 1 | PART - (B): Erection of 11KV Line for Ag General ConnectionsConducting route survey as per approved route map and pegging of route with tee off point section point & double pole locations. |
| 2 | Trimming of tree branches/plants manually/ by machine and preparing route approchases for proposed line/line maintenance work of existing HT/LT lines. |
| 3 | (2.3.2) Excavation of pit in ordinary rock which dose not required blasting to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. (A) Height of poles/R.S.Joist/M.S. Rail Size of pit 9 Mtr/ 1.2mx0.6mx1.50 m deep |
| 4 | (2.3.7) Excavation of pit in ordinary rock which dose not required blasting to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit (C)Stay set/Depth of pit 6'x 5/8\\" -0.75x0.5x1.35 m |
| 5 | (3.2.1) Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work siteWithin 10 Kms. |
| 6 | (3.2.2) Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 7 | (3.3.1)Safe Carriage of insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc. Within 10 Kms. |
| 8 | (3.3.2)Safe Carriage of insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc. Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 9 | (5.2.8) Erection of PCC poles in excavated pit with fixing of brackets,cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. The nuts & bolts are to be provided by the contractor as per Nigam's specification for which the payment will be made at the prevailing Discom store issue rates.(B) IN RURAL AREAPCC Poles 9 Mtr. Long (200Kg) |
| 10 | (5.4.2) Erection & fixing of G.I.Stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming.The work includes fixing of stay clamps.Stay insulator with stay wire at both ends with proper tension.Size of stay set/stay wire6\\"x5/8\\" with 7/10 SWG stay wire |
| 11 | (6.7.2) Fixing and assembly of disc.point channel pair with pilot plates top hampers & clamps on erected doubble pole structure as per design. The nuts &bolts are to be provided by the contractor as per Nigams specification for which payment will be made as per prevailing Discom store issue rates, 11 KV Line |
| 12 | (6.8.2) Fixing and assembly of disc.point channel pair with pilot plates top hampers & clamps on erected Single pole structure as per design. The nuts &bolts are to be provided by the contractor as per Nigams specification for which payment will be made as per prevailing Discom store issue rates,11 KV Line |
| 13 | (6.10)Fixing of 11kv B&S/T&C type disc insulator of 11kv lines (each unit consiting of 1nos.disc.& 1set of H/ W ) on terminal point including fixing of hardware and strips. |
| 14 | (6.14)Fixing of 11 KV pin insulator with pins. |
| 15 | (7.1.10) Laying ,jointing , stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging.The contractor will be provide P.G.clamps for which payment will be made as per prevailing Discom issue rate.(B) IN RURAL AREA ACSR RABBIT |
| 16 | (25.3)Supply of MS nuts & bolts |
| 17 | (25.5)Transportation and Fixing MS nuts & bolts |
| 18 | PART - (A):Construction of 11/0.4 KV substation for Ag Gen connections (2.3.2) Excavation of pit in ordinary rock which dose not required blasting to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. (A) Height of poles/R.S.Joist/M.S. Rail Size of pit 9 Mtr/ 1.2mx0.6mx1.50 m deep |
| 19 | (2.3.7) Excavation of pit in ordinary rock which dose not required blasting to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit (C)Stay set/Depth of pit 6'x 5/8\\" -0.75x0.5x1.35 m |
| 20 | (3.1.7) Safe carriage of PCC poles including loading / un-loading c) 9 Mtr.long 200 Kg. PCC pole Within 10 Kms. |
| 21 | (3.1.8) Safe carriage of PCC poles including loading / un-loading c) 9 Mtr.long 200 Kg. PCC poleAbove 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 22 | (3.2.1) Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work site Within 10 Kms. |
| 23 | (3.2.2) Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work site Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 24 | (3.3.1) Safe Carriage of insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc.Within 10 Kms. |
| 25 | (3.3.2) Safe Carriage of insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc. Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 26 | (3.5.1) Safe Carriage of11/.4 KV 3 Phase distribution transformer including loading/unloading.from store to site a) 10 & 16 KVA Within 10 Kms. |
| 27 | (3.5.2) Safe Carriage of11/.4 KV 3 Phase distribution transformer including loading/unloading.from store to site a) 10 & 16 KVA Above 10 Kms. & upto 30 Kms Add for each Km.or part thereof |
| 28 | (3.5.4) Safe carriage of 11/.4 KV 3 Phase distribution transformer including loading/unloading.from store to site b) 25 & 40 KVA Within 10 Kms. |
| 29 | (3.5.5) Safe carriage of 11/.4 KV 3 Phase distribution transformer including loading/unloading.from store to site b) 25 & 40 KVA Above 10 Kms. & upto 30 Kms Add for each Km.or part thereof. |
| 30 | (3.5.7) Safe carriage of 11/.4 KV 3 Phase distribution transformer including loading/unloading.from store to site c) Above 40 KVA & upto 100 KVA Within 10 Kms. |
| 31 | (3.5.8) Safe carriage of 11/.4 KV 3 Phase distribution transformer including loading/unloading.from store to site c) Above 40 KVA & upto 100 KVA Above 10 Kms. & upto 30 Kms Add for each Km.or part thereof. |
| 32 | (5.3.3) Erection &assembly of 2 Pole structures of steel supports or PCC poles in excavated pit in alignment after checking the same with plumb line.Including fixing of complete steel structure for line D.P.The support is to be back filled with soil with proper ramming.The nuts &bolts are to be provided by the contractor as per Nigams specfication for which the payment will be made at the prevailing Discom store issue rates. PCC Poles 9 Mtr. Long(200 Kg.) |
| 33 | (5.4.2) Erection & fixing of G.I.Stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming.The work includes fixing of stay clamps.Stay insulator with stay wire at both ends with proper tension.Size of stay set/stay wire 6\\"x5/8\\" with 7/10 SWG stay wire |
| 34 | (6.17..2)11kv Horn Gap fuse set. |
| 35 | (6.20.1)Installation testing as per Nigams norm & commissioning of 11/.4 KV distribution transformer on erected supports including fixing of base channels as per requirment jumpering on HV&LV side, crimping of lugs/ clamping earth connections of body and neutral of transformer with wire /strip (as already provided with earthing ) complete in all respect. The PG clamps nuts & bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates, 10 and 16 KVA |
| 36 | (6.20.2) Installation testing as per Nigams norm & commissioning of 11/.4 KV distribution transformer on erected supports including fixing of base channels as per requirment jumpering on HV&LV side, crimping of lugs/ clamping earth connections of body and neutral of transformer with wire /strip (as already provided with earthing ) complete in all respect. The PG clamps nuts & bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates, 25 and 40 KVA |
| 37 | (6.20.3) Installation testing as per Nigams norm & commissioning of 11/.4 KV distribution transformer on erected supports including fixing of base channels as per requirment jumpering on HV&LV side, crimping of lugs/ clamping earth connections of body and neutral of transformer with wire /strip (as already provided with earthing ) complete in all respect. The PG clamps nuts & bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates, Above 40 KVA & up to 100 KVA |
| 38 | (6.24(A)) Laying, testing termination of control cable 1100 volts PVC insulated including supply and installation of ferrules to designate various cores of control cables by terminal Nos. of identification including utilization of cable gland. The control cable should be clearly arranged in trenches avoiding crossings including clamping of control cable at regular interval and providing identify tags.a) 25 Sq.mm |
| 39 | (7.1.10) Laying ,jointing , stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging.The contractor will be provide P.G.clamps for which payment will be made as per prevailing Discom issue rate.(B) IN RURAL AREAACSR RABBIT |
| 40 | (8.2)Three nos. Earthing of each 11/0.4 KV distribution transformer /sub-station with M.S.Rod 20mm dia 3 meter long and driving them into earth by mechanical means at a distance as per approved design & drawing & specification.The work includes flattening of top ends of M.S.rod drilling a hole of 9/16\\" dia.at flattened top and tightening of M.S.flat 50x6mm/25x3mm/(having 3 hole 2ends and 1mm middle) with nuts and bolts with M.S.rods top end hole.The flat will also be welded with M.S.rod.The end will be connected to equipments as under in sequence. |
| 41 | (25.3)Supply of MS nuts & bolts |
| 42 | (25.5)Transportation and Fixing MS nuts & bolts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender