Tender For Repair Renovation And Other Maintenance Work Of Various Buildings In Pwd Randb Sub Division Thuroo For The Year 2025-26
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Sep 2026
6 days left
EMD
40000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Renovation And Other Maintenance Work Of Various Buildings In Pwd Randb Sub Division Thuroo For The Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 3 | Extra for cutting reinforcement bars manually/by mechanical means inR.C.C. or R.B. work (Payment shall be made on the cross sectional areas of R.C.C. or R.B. work) as per direction of Engineer-in-charge. |
| 4 | Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work |
| 5 | Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar |
| 6 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :From brick work in cement mortar |
| 7 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :A. Of area of 3 sqm. and below |
| 8 | B. area beyond 3 Sqm. |
| 9 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :A. Of area of 3 sqm. and below |
| 10 | B. of area beyond 3 Sqm. |
| 11 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 12 | Demolishing mud phaska in terracing and disposal of material within 50 meters lead |
| 13 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 14 | Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm. and under including cutting the patch in proper shape raking out joints and preparing the plastering the surface of the wall’s complete including disposal of rubbish to the dumping ground within 50 mtr. Lead. With cement mortar (1:4) 1 cement : 4 fine sand |
| 15 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty :A. Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 16 | B. Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm) |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering grade. All work upto linth level. A. 1:5:10 (1 cement : 5 coarse sand : 10 graded crushed stone agg. 40mm nominal size) crushed |
| 18 | B. 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone agg. 40mm nominal size) crushed |
| 19 | C. 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone agg. 20mm nominal size) crushed |
| 20 | D. 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone agg. 20mm nominal size) with 20% boulders |
| 21 | E. 1:2:4 (1 cement : 2 coarse sand :4 graded crushed stone agg. 20mm nominal size) crushed |
| 22 | F. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 23 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 24 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 25 | Extra for brick work/tile brick/AAC block masonry in superstructure above floor V level for each four floors or part thereof by mechanical means: |
| 26 | Extra for brick work in:Square or rectangular pillars |
| 27 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 28 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 29 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 30 | Centering and shuttering including strutting, propping etc and removal of form work for:-A.Foundation, footing, bases of columns. |
| 31 | B. Suspended floors, roofs, Landing, balconies and access platform. |
| 32 | C. Shelves (Cost in Situ) |
| 33 | D. Edges of slab and breaks in floors and walls under 20 mm wide |
| 34 | Reinforced cement concrete work in chimneys, shafts upto floor five level including curing complete but excluding the cost of centering, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 35 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 36 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 37 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 38 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit |
| 39 | Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead. |
| 40 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead. |
| 41 | White washing with lime to give an shades A. Old work (Two or more coats) |
| 42 | B. Old work ( One or more coats) |
| 43 | Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc. complete. |
| 44 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. |
| 45 | Removing dry or oil bound distemper, water proofing cement paint andthe like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 46 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 47 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 48 | 15mm Cement plaster on the rough side of single or half brick wall of mix:A. 1 : 6 ( 1 cement : 6 fine sand) |
| 49 | B. 1:4 (1 cement : 4 coarse sand) |
| 50 | 20 mm cement plaster of mix.1:6 (1 cement : 6 coarse sand) |
| 51 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 52 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 53 | Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 54 | Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) |
| 55 | Finishing walls with water proofing cement paint of required shade:Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 56 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 57 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel work |
| 58 | Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 59 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 60 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 62 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeA. 1 mm thick. |
| 63 | B. 2 mm thick |
| 64 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:A. Internal work-exposed on wall with clamps at 1.00 meter spacing1216 (16mm OD) pipe |
| 65 | 1620 (20 mm OD) pipe |
| 66 | 2025 (25 mm OD) pipe |
| 67 | B. Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc.1216 (16mm OD) pipe |
| 68 | 1620 (20 mm OD) pipe |
| 69 | 2025 (25 mm OD) pipe |
| 70 | Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc Internal work-Exposed on wall15 mm dia nominal bore (Medium) |
| 71 | 20 mm dia nominal bore (Medium) |
| 72 | 25 mm dia nominal bore (Medium) |
| 73 | Providing and fixing G.I Pipes complete with G.I fittings including trenching and refilling etc (External work)15 mm dia nominal bore (Medium) |
| 74 | 20 mm dia nominal bore (Medium) |
| 75 | 25 mm dia nominal bore (Medium) |
| 76 | Providing and fixing G.I union in G.I pipe including cutting and threading the pipe and making long screws etc complete.15 mm nominal bore |
| 77 | 20 mm nominal bore |
| 78 | 25 mm nominal bore |
| 79 | Providing and fixing on wall face un-plasticized - PVC mouldedfittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Coupler 75 MM dia pipe |
| 80 | 110 MM dia pipe |
| 81 | Providing and fixing PVC moulded fittings/accessories for PVC pipes including jointing with seal ring complete (Finolex / Supreme/Prince make)75mm dia Plain bend |
| 82 | 110 mm dia Plain Bend |
| 83 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 84 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 85 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 86 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 87 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 liter capacity -White |
| 88 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid. |
| 89 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required :450x300x150 mm size |
| 90 | 600 x 450x 200 mm size |
| 91 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain boardA. 610x460mm bowl depth 200mm |
| 92 | B. 470x420 mm bowl depth 178mm |
| 93 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe 32mm dia |
| 94 | Providing and fixing C.P fitting (Jaquar (Essco) /Marc/Cera make)Short Nose bib cock |
| 95 | Long Nose bib cock |
| 96 | Angle Valve |
| 97 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 98 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III)8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 99 | Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 100 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) A. Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 101 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) 22.1.2.1 Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 102 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. 22.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 103 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) 22.3.1 With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 104 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)B. Powder coated aluminum (minimum thickness of powdercoated 50 microns) |
| 105 | C. Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns) |
| 106 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on both sides. |
| 107 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm) |
| 108 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness |
| 109 | Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 110 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :A. 300 x 16mm |
| 111 | B. 250 x 16mm |
| 112 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :A. 200 x 10 mm |
| 113 | B. 150 x 10 mm |
| 114 | C. 100 x 10 mm |
| 115 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.A. 125mm |
| 116 | B. 100mm |
| 117 | C. 75mm |
| 118 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 119 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).A. First class kail wood : 30mm thick |
| 120 | B. First class kail wood : 35mm thick |
| 121 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked |
| 122 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood 30mm |
| 123 | First class kail wood 35mm |
| 124 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With 12 mm mild steel U beading |
| 125 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood 30mm |
| 126 | First class kail wood 35mm |
| 127 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: Budloo/ Fir wood A. 50x12mm |
| 128 | B. 50 x 20mm |
| 129 | Providing and fixing brass curtain rods of wall thickness 1.25 mmwith twobrass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.A. 20 mm diameter. |
| 130 | B. 25 mm diameter. |
| 131 | Providing and laying Blind Curtains including fixing on walls all complete JOB LMR |
| 132 | Providing and laying Cotton Curtains all complete JOB LMR |
| 133 | Providing and laying Single Cotton Bed sheets LMR |
| 134 | Providing and laying Double Cotton Bed sheets LMR |
| 135 | Providing and laying Pillows LMR |
| 136 | providing and fixing Wooden wall panelling including cost of wooden board all screw et complete Job LMR |
| 137 | 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35 kg/Cum of earth and gobri leeping with bhusa at 3.5kg/cum 8 earth and mixed with 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 mixed (1 cement : 3 fine sand) with 2% of integal water proofing compound by weight of cement and finsihing neat with hand moulded FPS brick tiles. |
| 138 | Extra for every additional 1 cm thickness of mud phaska. |
| 139 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase |
| 140 | Making khurras 45x45cm with average min. thickness of 5cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) over pvc sheet 1mx1mx400 micron finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 141 | Providing and laying water proofing treatment in sunkan portion of WCs, bathroom etc. by applying cement slurry mixed water proofing cement compound consisting of applying. a) After surface preparation, first layer of slurry of cement @0.488 Kg/Sqm mixed with water proofing cement compound @0.253 Kg/sqm. This layer will be allowed to air cure for 4 hours. b)Second layer of sullary of cement @ 04242 Kg/Sqm mixed with water proofing cement compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curring for 48 hours. The Rates includes prepration of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry. |
| 142 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compoundconsisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours.The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately)For the purpose of measurement the entire treated surface will be measured. |
| 143 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.A. 40mm thick with 20 mm nominal size stone aggregate |
| 144 | B. 50 mm thick with 20 mm nominal size stone agg (Crushed) |
| 145 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble Granite of any colour or shade (Area of slab upto 0.5 sqm) 16mm |
| 146 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work |
| 147 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) |
| 148 | Providing and fixing M.S Grills of required pattern in frames of windows etc with M.S Flats square or round bars etc incl. priming coat with approved steel primer all complete.A. Fixed to steel windows by welding |
| 149 | B. Fixed to openings / wooden frames |
| 150 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). ; Size of tile 60x60 cm |
| 151 | Providing and laying integral cement based water proofing treatment including prepration of surfaces as required for treatment of roofs, balconies, terracies etc consisting of following operations a) applying a slurry coat of neat cement using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement: 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick jointless cement mortar of mix 1 :4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved byEngineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finially finishing the surface with trowel with neat cement slurrv and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm. |
| 152 | Providing and fixing of electrification as per necessisty at site |
| 153 | Supply of labour for repair worksBlack smith Ist class |
| 154 | Carpanter Ist class |
| 155 | Carpenter 2nd class |
| 156 | Mason Ist class |
| 157 | Mason 2nd class |
| 158 | Painter |
| 159 | Mazdoor |
| 160 | Provding and fixing wall lining using heavy duty PVC panels [NSI] |
| 161 | Provding and fixing ceiling using heavy duty PVC panels [NSI] |
| 162 | Provding and fixing wall lining using heavy duty WPC panels [NSI] |
| 163 | Providing and fixing Gypsum board ceiling including required accessories design as per direction of Engineer - In - Charge. [NSI] |
| 164 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 165 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 166 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 167 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 168 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 169 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 170 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood |
| 171 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with adjustable lugs with split end tail to each jamb |
| 172 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5 mm nominal size stone aggregate. |
| 173 | 40mm thick with 20 mm nominal size stone aggregate. |
| 174 | 50 mm thick with 20mm nominal size stone aggregate. |
| 175 | Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS: 13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge. 9mm thickness |
| 176 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 177 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 178 | Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete : |
| 179 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earthdirected: 1mtr from cutting edge |
| 180 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dye to required colour or shade with necessary screws etc. complete : Single rubber stopper |
| 181 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete. |
| 182 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 183 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces |
| 184 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 185 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 186 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 187 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 188 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 189 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
| 190 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 191 | 20 mm nominal bore |
| 192 | Carriage of material by M.T incl loading/unloading & stacking complete Thuroo Sub- Division A.Brick av. Lead 150 km |
| 193 | B. Brick tile av. Lead 150 km |
| 194 | C. Sand av. Lead 50 km |
| 195 | D. Stone agg. Below 40 mm nominal size av. Lead 80 km |
| 196 | E. Disposal of material 3 km |
| 197 | Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required (Group-A) |
| 198 | Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required (Partially laid conduit) |
| 199 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. (Group-A) |
| 200 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required. |
| 201 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 202 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 203 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 204 | Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. |
| 205 | 2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire |
| 206 | 2 x 2.5 sq mm + 1 x 2.5 sq. mm earth wire |
| 207 | 2 x 4 sq. mm + 1 x 4 sq. mm earth wire |
| 208 | 2 x 6 sq. mm + 1 x 6 sqmm earth wire |
| 209 | 2 x 10 sq. mm + 1 x 6 sq. mm earth wire |
| 210 | 2 x 16 sq. mm + 1 x 6 sq. mm earth wire |
| 211 | 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire |
| 212 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 213 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 214 | 4 x 10 sq. mm + 2 x 6 sq. mm earth wire |
| 215 | 4 x 16 sq. mm + 2 x 6 sq. mm earth wire |
| 216 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required. |
| 217 | 1 x 1.5 sq. mm |
| 218 | 2 x 1.5 sq. mm |
| 219 | 3 x 1.5 sq. mm |
| 220 | 1x 2.5 sq. mm |
| 221 | 2 x 2.5 sq. mm |
| 222 | 3 x 2.5 sq. mm |
| 223 | 1 x 4 sq. mm |
| 224 | 2 x 4 sq. mm |
| 225 | 3 x 4 sq. mm |
| 226 | 4 x 4 sq. mm |
| 227 | 5 x 4 sq. mm |
| 228 | 6 x 4 sq. mm |
| 229 | 1 x 6 sq. mm |
| 230 | 2 x 6 sq. mm |
| 231 | 3 x 6 sq. mm |
| 232 | 4 x 6 sq. mm |
| 233 | 5 x 6 sq. mm |
| 234 | 6 x 6 sq. mm |
| 235 | 1 x 10 Sq mm |
| 236 | 2 x 10 Sq mm |
| 237 | 3 x 10 Sq mm |
| 238 | 4 x 10 Sq mm |
| 239 | 1 x 16 Sq mm |
| 240 | 2 x 16 Sq mm |
| 241 | 3 x 16 Sq mm |
| 242 | 4 x 16 Sq mm |
| 243 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as |
| 244 | 1 Pair |
| 245 | 2 Pair |
| 246 | 4 Pair |
| 247 | Supplying and fixing of ceiling fan of followingsweep with 2.25 mfd condenser and 1'-6\\" down rod on the existing fan hook with necessary connection from ceiling rose to fan using twin core copper wire. (As approved site in-charge) |
| 248 | 1200 mm sweep |
| 249 | Supplying and fixing of 400 mm sweep wall mounting fan (oscillating type) on wall with necessary connection as required. |
| 250 | Supplying and fixing of following sizes Transair exhaust fan with metal blade complete set on existing holes on wall with necessary connection from ceiling rose to fan using 2 core flexible copper wire. |
| 251 | 200 mm / 8\\" sweep exhaust fan |
| 252 | 225 mm / 9\\" sweep exhaust fan |
| 253 | 300mm/12\\" sweep exhust fan |
| 254 | 300mm/12\\" sweep exhust fan (Heavy Duty) |
| 255 | Supplying and fixing of following sizes exhaust fan with PVC blade & Louvers complete set on existing holes on wall with necessary connection from ceiling rose to fan using 2 core flexible copper wire. |
| 256 | 150 mm / 6\\" sweep exhaust fan |
| 257 | 200 mm / 8\\" sweep exhaust fan |
| 258 | 225 mm / 9\\" sweep exhaust fan |
| 259 | 250 mm /10\\" sweep exhaust fan |
| 260 | 300mm/12\\" sweep exhust fan |
| 261 | Supplying and fixing of fan hook (U hook) on celiling with 4 nos. of anchor fastener on both ends with necessary bolts and nuts and mansonry work as required. |
| 262 | Supplying and fixing of following sizes extra down rod with twin core flexible copper wire for ceiling fan. |
| 263 | 6'-0\\" |
| 264 | Making round shaped hole on the wall including supply and fixing of necessary cement concrete collar to suit 300 mm heavy duty exhaust fan and finishing the wall to make good. |
| 265 | Supplying and fixing of 25 mm thick ply wood with round shaping at the center to fix exhaust fan on ventilator with required accessories. |
| 266 | Supplying & fixing of following way single pole and netural, sheet steel, MCB distribution board, 240 volts, on surface/ recess complete with tinned copper busbar netural busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. |
| 267 | 4 way (Double door) |
| 268 | 6 way (Double door) |
| 269 | 8 way (Double door ) |
| 270 | 12 way (Double door) |
| 271 | 16 way (Double door) |
| 272 | Supplying & fixing of following way horizontal type three pole and netural, sheet steel, MCB distribution board, 415 volts, on surface/ recess complete with tinned copper bus bar neutral buss bar, earth bar,din bar interconnection nection,powder painted including earthing etc. as required. |
| 273 | 4 Way (4+12), (Double door ) |
| 274 | 6 way ( 4+18), (Double door) |
| 275 | 8 way (4+24), (Double door) |
| 276 | 12 way (4 +36), (Double door) |
| 277 | Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover. |
| 278 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 279 | Providing and fixing 20 mm X 3 mm G.I. strip on surface or in recess for connections etc. as required. |
| 280 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 281 | Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly The earthing pit should be covered with PVC cover. |
| 282 | Providing and fixing of 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. |
| 283 | Providing and fixing of 20 mm x3 mm copper strip on surface or in recess for connections etc. as required. |
| 284 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. |
| 285 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. (ISI Make). |
| 286 | 20 mm |
| 287 | 25 mm |
| 288 | 32 mm |
| 289 | 40 mm |
| 290 | 20/25 mm flexible pipe |
| 291 | Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K / 6000°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not riseabove 90°C). Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm) |
| 292 | 18- 22 watt |
| 293 | Providing and fixing of LED Lamp. |
| 294 | 0.5 w |
| 295 | Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P.F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg- 120 deg as per the application and the project requirement deg, suitable table fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.(Thermal management: heat sink of aluminum housing such that LEDjunction temperature shall not rise above 90°C). |
| 296 | 70 watt |
| 297 | 100 watt |
| 298 | Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C) |
| 299 | 5/6 watt. |
| 300 | 8 - 10 watt |
| 301 | 12 -15 watt |
| 302 | 18 watt |
| 303 | 22 watt |
| 304 | 30 watt |
| 305 | Providing & fixing of following accessories. |
| 306 | 5/6 Amp. 3 pinTop |
| 307 | 5/6 Amp 2 pin Top |
| 308 | 15/16 Amp 3 pin top |
| 309 | Insulation Tape (ISI brand) |
| 310 | Electronic Step Type fan Regular (Piano type) |
| 311 | Celing Rose |
| 312 | 2.2/3/3.5 mfd fan condenser |
| 313 | Brass batten/ angle holder including (Modular)connection etc. as required. |
| 314 | Dimmer Type Regulator (with numbering) |
| 315 | 5/6 Amp combined |
| 316 | 15/16 Amp combined |
| 317 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. |
| 318 | 1 or 2 Module (75mm x 75mm) |
| 319 | 3 Module (100mm x 75mm) |
| 320 | 4 Module (125mm x 75mm) |
| 321 | 6 Module (200mm x 75mm) |
| 322 | 8 Module (125mm x125mm) |
| 323 | 12 Module ( 200mm x 150mm) |
| 324 | 18 Module |
| 325 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. |
| 326 | 1 or 2 Module |
| 327 | 3 Module |
| 328 | 4 Module |
| 329 | 6 Module |
| 330 | 8 Module |
| 331 | 12 Module |
| 332 | 18 Module |
| 333 | Supplying and fixing following size/ modules, GI box in recess etc as required. |
| 334 | 1 or 2 Module (75mm X 75mm) |
| 335 | 3 Module (100mm X 75mm) |
| 336 | 4 Module (125mm X 75mm) |
| 337 | 6 Module (200mm X 75mm) |
| 338 | 8 Module (125mm X 125mm) |
| 339 | 12 Module (200mm X 150mm) |
| 340 | 18 Module |
| 341 | Supplying and fixing following size/ modules, PVC box in recess etc as required. |
| 342 | 1 or 2 Module (75mm X 75mm) |
| 343 | 3 Module (100mm X 75mm) |
| 344 | 4 Module (125mm X 75mm) |
| 345 | 6 Module (200mm X 75mm) |
| 346 | 8 Module (125mm X 125mm) |
| 347 | 12 Module (200mm X 150mm) |
| 348 | 18 Module |
| 349 | Supplying and fixing following piano type switch/ socket on the existing box/ cover inculding connection etc. as required. |
| 350 | 5/6 amp switch |
| 351 | 15/16 amp switch |
| 352 | 3 pin 5/6 amp socket outlet |
| 353 | 6 pin 15/16 amp socket outlet |
| 354 | Telephone socket outlet |
| 355 | TV Antenna socket outlet |
| 356 | Bell push |
| 357 | 2 pin socket outlet 5 Amp. |
| 358 | Suplying and fixing following modular switch/ socket on the existing modular plate & switch box inculding connection but excluding modular plate etc. as required. |
| 359 | 5/6 amps switch |
| 360 | 2 way 5/6 amps switch |
| 361 | 15/16 amp switch |
| 362 | 3 pin 5/6 amp socket outlet |
| 363 | 6 pin 15/16 socket outlet |
| 364 | Telephone socket outlet |
| 365 | TV Antenna socket outlet |
| 366 | DP Switch 32 Amp with Indicator |
| 367 | Bell push |
| 368 | 2 pin socket outlet 5 Amp. |
| 369 | Servicing of the Geyser etc. as required. |
| 370 | Supplying and replacement of the suitable size and rating of the following in the storage water heater and making the geyser in good working condition. (Make as per the gyser installed) Heating Element |
| 371 | Thermostat with control |
| 372 | Replacement of Assembly complete job |
| 373 | Supplying and fixing of following rating 240/415 volts \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole upto 32 amp. |
| 374 | Single pole 40 amp. |
| 375 | Single pole and neutral upto 32 amp. |
| 376 | Single pole and neutral 32 amp. (Modular) |
| 377 | Double pole upto 32 amp. |
| 378 | Double pole 40 amp. |
| 379 | Triple Pole upto 32 amp. |
| 380 | Triple Pole 40 amp. |
| 381 | Triple Pole and netural upto 32 amp. |
| 382 | Four Pole upto 32 amp. |
| 383 | Single pole and neutral 40 Amp |
| 384 | Single pole and neutral 63 Amp |
| 385 | Single pole and neutral 100 Amp |
| 386 | TPN 40 Amp |
| 387 | TPN 63 Amp |
| 388 | TPN 100 Amp |
| 389 | Supplying and fixing single pole blanking plate in the existing MCB DB Complete etc. as required |
| 390 | SITC of wall/free standing floor mounted dust and vermin proof compartmentalized cubical panel for electrical Works, made out of CRCA sheet. Other parameters required as per point (a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable extension type structure (b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgear c) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar (> 125). (d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge. |
| 391 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type) 40 Amp, 25 KA, FP MCCB ICU = 100% ICS |
| 392 | 63 Amp, 25 KA, FP MCCB ICU = 100% ICS |
| 393 | 100 Amp, 30 KA, FP MCCB ICU = 100% ICS |
| 394 | 125 Amp, 36 KA, FP MCCB ICU = 100% ICS |
| 395 | 160 Amp, 36 KA, FP MCCB ICU = 100% ICS |
| 396 | 200 Amp, 36 KA, FP MCCB ICU = 100% ICS |
| 397 | 250 Amp, 36KA, FP MCCB ICU = 100% ICS |
| 398 | Electrical Rubber Mat having thickness 6mm and width 1 Mtr |
| 399 | ON Load Change Over Switch FP 100 amp. (Front operated) |
| 400 | ON Load Change Over Switch FP 200 amp. (Front operated) |
| 401 | ON Load Change Over Switch FP 250 amp. (Front operated) |
| 402 | Aluminium Bus Bar 100 Amp set of 4 strips 18\\" |
| 403 | Aluminium Bus Bar 200 Amp set of 4 strips 18\\" |
| 404 | Aluminium Bus Bar 300 Amp set of 4 strips 18\\" |
| 405 | Aluminium Bus Bar 400 Amp set of 4 strips 18\\" |
| 406 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set etc. |
| 407 | Providing and fixing of PCB in wall fans (Remote control type) having sweep 400 mm of make Havells/ CG. |
| 408 | Providing and fixing of blades of following fans Wall Fan |
| 409 | Ceiling Fan |
| 410 | Exhaust Fan |
| 411 | Pedestal Fan |
| 412 | Supplying & laying of PVC insulated and PVC sheathed/ XLPE Aluminium power cable of 1.1 KV grade of following size on surfaces/ direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (Armoured cable) 10 sq. mm 2 core |
| 413 | 16 sq. mm 2 core |
| 414 | 25 sq. mm 2 core |
| 415 | 35 sq. mm 2 core |
| 416 | 10 sq. mm 4 core |
| 417 | 16 sq. mm 4 core |
| 418 | 25 sq. mm 4 core |
| 419 | 25 sq. mm 3.5 core |
| 420 | 35 sq. mm 3.5 core |
| 421 | 50 sq. mm 3.5 core |
| 422 | 70 sq. mm 3.5 core |
| 423 | Supplying and fixing of twin core aluminium cable all along the wall surface unarmoured. 6 sq. mm |
| 424 | 10 sq. mm |
| 425 | 16 sq.mm |
| 426 | 25 sq.mm |
| 427 | 35 sq.mm |
| 428 | Flexible Twin core cable whiter wire |
| 429 | Labour charge for electrician |
| 430 | Labour charge for Helper electrician |
| 431 | Supplying & Drawing of Co- axial TV cable RG-6 grade, 0.7 mm solid copper conductor. |
| 432 | Supplying & Drawing of UTP 4 point Cat-6 cable (1 run cable) (D-Link, Schneider, Systimax) |
| 433 | Supplying & fixing of following PVC Gang Box. One way |
| 434 | Two way |
| 435 | 1 + 1 way |
| 436 | 3 + 1 way |
| 437 | 4 + 1 way |
| 438 | 6 + 1 way |
| 439 | 1 + 1 way (Power) |
| 440 | Supplying & fixing of Electrical Accessories PVC Casing and Caping (Batten). Casing Caping 1\\" |
| 441 | Casing Caping 3/4\\" |
| 442 | 4\\" Deep Box |
| 443 | 5\\" Fan Box |
| 444 | Conceeled Box |
| 445 | Junction Box (Metal) |
| 446 | Supplying and fixing of Phenolic Laminated Sheet 9\\" x 11\\" including cutting the space for switches/socket etc. |
| 447 | Supplying and fixing of Phenolic Laminated Sheet 9\\" x 6\\" including cutting the space for switches/socket etc. |
| 448 | Supplying and fixing of Phenolic Laminated Sheet 4\\" x 4\\" including cutting the space for switches/socket etc. |
| 449 | Supplying and fixing of Phenolic Laminated Sheet 11\\" x 13\\" including cutting the space for switches/socket etc. |
| 450 | Supplying and fixing of Phenolic Laminated Sheet 6\\" x 3\\" including cutting the space for switches/socket etc. |
| 451 | Supply and fixing of single phase of following rating self priming for pumping water including connections etc as required. (Copper winding) 0.50 HP |
| 452 | 0.75 HP |
| 453 | 3 HP 3 phase motor |
| 454 | 3 phase motor Starter for 3 HP to 7 HP Motor |
| 455 | Supplying, fixing & commissioning of vertical Storage Water Heater (Geyser) of following capacity along with PVC Pipes etc as required. (5 Star with 8 Bar Pressure) 35 Ltr |
| 456 | 50 Ltr |
| 457 | Supply of following electrical Heater Single Rod |
| 458 | Double Rod |
| 459 | Three Rod |
| 460 | Cooking Heater Controlled by Switch/Regulator |
| 461 | Heating Blower |
| 462 | Pillar Heater Gopi 1500 watt |
| 463 | Rod for Pillar Heater Gopi |
| 464 | Supply of following electrical appliances. |
| 465 | 12 V 7.0 AH sealed rechargeable battery for lift |
| 466 | Supplying of extension Card |
| 467 | 5 Amp. |
| 468 | 15 Amp |
| 469 | Supplying, installation, testing and commissioning of 120/120 Liters of water Cooler having full stainless steel body, cooling capacity 120 ltr/hour and storage capacity 120 ltr alongwith PVC connecting pipes as required. (ISO Certified) . |
| 470 | Supplying, installation, testing and commissioning of following type of water purifiers alongwith PVC connecting pipes as required. (RO + UV + UF mineral control with TDS control ) |
| 471 | UV purifier for water cooler |
| 472 | Supplying, Installation, Testing & Commissioning of following capacity automatic voltage stabilzer copper wound wall mounted, single phase with range of 135-240 V along with wall mounting brackets & fitting. The job includes repairing the walls where necessary. Warrantee.:- 2 Years from the date of installation. 4 KVA |
| 473 | 5 KVA |
| 474 | Supply, erection, testing and commissioning compressor suitable for 150/150 ltrs. Water cooler with gas charging and other required accessories to get water cooler workable. |
| 475 | Supply, erection, testing and commissioning compressor suitable 40/80 ltrs. Water cooler with gas charging and other required accessories to get water cooler workable. |
| 476 | Provision of Gas charging of water cooler 150/150 ltr. |
| 477 | Provision of Gas charging of water cooler 40/80 ltr. |
| 478 | Replacement of Water purifier chocked candles. ( RO+UV+UF) |
| 479 | Replacement of Water Purifier Candles of water cooler |
| 480 | Servicing of Water purifier candles. ( RO+UV+UF) |
| 481 | Replacement of Pre filter Water Purifier Candles of water cooler (10 inch) |
| 482 | Installation of Pre filter Water Purifier Candles of water cooler with housing (10 inch) |
| 483 | Servicing of Water Purifier Candles of water cooler Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender