Tender For metallic and tarring On New Bus Stand Road At Keylong Km. 0/00 To 0/550. (Sh: - Providing And Laying Prime Coat, Tack Coat, Bituminous Concrete, Bm, Edge Line Makring Etc.)
Tender Value
28.36 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
3 days left
EMD
56800
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lahul and Spiti → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for metallic and tarring On New Bus Stand Road At Keylong Km. 0/00 To 0/550. (Sh: - Providing And Laying Prime Coat, Tack Coat, Bituminous Concrete, Bm, Edge Line Makring Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting stone aggregate of specific size to water bound macadam specification i/c spreading in uniform thickness hand packing rolling with 3 (Three) -wheeled 80-100 (Eight-One Hundred) KN static roller in stages to proper grade and camber applying and brooming, stone screening/binding materials to fill up the interstices of course agg. watering and compacting to the required density Grading - III as per technical specification clause 405 (Four Hundred Five) by manual mean. including carriage of material in all leads and lifts & as per the direction of Engineer-in-Charge. (A.R). (Rate including G.S.T) |
| 2 | Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 Kg/Sqm (Zero Point Seventy-One Point Zero Kilogramme/Square Metre) using mechnical means as per Technical Specification Clause 502 (Five Hundred Two). including carriage of material in all leads and lifts & as per the direction of Engineer-in-Charge. (A.R). (Rate including G.S.T) |
| 3 | Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion distributor @ 0.25 to 0.30 (Zero point twenty five to zero point thirty) kilogram/Square metre on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per technical specification clause 503 (Five Hundred Three). including carriage of material in all leads and lifts & as per the direction of Engineer-in-Charge. (A.R). (Rate including G.S.T) |
| 4 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge 50 to 100 mm (Fifty to One Hundred milimetre) average compacted thickness with bitumen of grade VG-30 (Thirty) @ 3.50% (Three Point Fifty percentage) by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 (One Hundred - One Hundred Twenty) TPH capacity. including carriage of material in all leads and lifts & as per the direction of Engineer-in-Charge. (A.R). (Rate including G.S.T) |
| 5 | Providing and laying 30mm (Thirty milimetre) thick layer of 60-80 (Sixty - Eighty) TPH batch type HMP producing an average output of 50 tonnes (Fifty Tonnes) per hour using crushed aggregates of specified grading, premixed with bituminous binder @5% (Five percement) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled and tendem rollers to achieve the desired compaction as per specification clause no. 508 (Five Hundred Eight) complete in all respects complete including hauling/carriage of materials, labour and equipments to various location through all modes of trasportation within all leads and lifts and as per direction of Engineer-in-charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other taxes imposed by the Government but excluding GST. including carriage of material in all leads and lifts & as per the direction of Engineer-in-Charge. (A.R). (Rate including G.S.T) |
| 6 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250 gms per square metre area thickness 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level uniform and free from streaks and holes including carriage of material in all leads and lifts & as per the direction of Engineer-in-Charge. (A.R). (Rate including G.S.T) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender