Tender For Construction Of Toilet For The Juvenile Justice Board And Child Welfare Committee Operating In The Premises Of The Protection Home And Bal Grih Operated In The District
Tender Value
10.73 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
4 days left
EMD
22000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet For The Juvenile Justice Board And Child Welfare Committee Operating In The Premises Of The Protection Home And Bal Grih Operated In The District
BOQ
| Sl. No. | Item Description |
| 1 | Labour required for site clearence do-do-E/I |
| 2 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts levelling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I (5.1.1+5.1.2) |
| 3 | Filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) (5.1.7) |
| 4 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per buy lading specification and direction of E/I (Mode of measurement compacted volume). (5.1.10) |
| 5 | Providing designation 75B one Brick flat soling as per building specification and direction of E/I (5.6.3) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work up to plinth level: 1:2:4(1cement:2 coarse sand:3 graded stone aggregate) (5.3.1.2) |
| 7 | Reinforced cement concrete work in beams , suspended floors, roofs having slope up to 15 degree landings, balconies , shelves, chajjas , lintels , bands , plain window sills , staircases and spiral stair cases above plinth level up to floor five level , excluding the cost of centering , shuttering finishing and reinforcement , with 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (5.3.11) |
| 8 | Centering and Shutering including strutting propping etc.and remove all….do..do..Lintels, Beams, Plinth Beam and Girders etc (5.3.17.5) |
| 9 | Suspended floors roofs landing balconies and access platform (5.3.17.3) |
| 10 | providing designation 75 B brick work in c.m (1:6)in foundation and plinth as per building specification and direction of E/I (5.2.6) |
| 11 | Providing 50mm thick damp proof course with cement concrete M-150 with nominal mix of (1:2:4) with approved as per building specification and direction of E/I (5.3.5) |
| 12 | Providing designation 75 B Brick work in C.M (1:6) in superstructure as per building specification and direction of E/I (5.2.14) |
| 13 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including as per building specification and direction of E/I (5.7.14) |
| 14 | Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved deign and drawing as per building specification and direction of E/I (a) 10mm (TMT coil Fe 500) (only valid for TATA(Tucson), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (5.5.5.a) |
| 15 | Providing 12mm thick cement plaster (1:6) as per building specification and direction of E/I (5.7.3) |
| 16 | Providing 6mm. Thick cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 as per building specification and direction of E/I (5.7.6) |
| 17 | Providing two coat snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper. Scaffolding, curing and taxes all complete as pr building specification and direction of E/I(5.8.24) |
| 18 | Providing and laying vetrified floor tiles in different sizes (thickness to be specificed by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622/ISO 13006 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 Coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete size of Tile 600x600mm(5.6.28) |
| 19 | Supplying fitting and fixing M.S grill made of 20x60mm M.S. flat as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth carriage of grill to work site hoisting as per building specification and direction of E/I(5.5.12) |
| 20 | Supplying fitting and fixing 20 gauge G.C.I. Sheet gate fitted on M.S. Angle frame of size 60x60x6mm. Including cost of fabrication providing necessary locking arrangement with Haskell and downy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction E/I. (5.5.29) |
| 21 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface all complete as per building specification and direction of E/I.(5.8.45) |
| 22 | Providing and laying 6 mm precast white glazed tiles in wall over 12 mm cm(1:3)and joint do-do-E/I(15X15CM) (5.6.23.1) |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -all work upto plinth level:1:1.5:3 (1 cement : 1.5 coarse sand (zone III) : 3 graded stone aggregates 20 mm nominal size) (5.3.1.1) |
| 24 | Providing 12mm cement plaster (1:6) with 1.5mm cement punning with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.(5.7.3+ 5.7.11) |
| 25 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centring ,shuttering,finishing and reinforcement - All work up to plinth level. 1:2:4 (1 cement : 1.5 coarse sand(zone lll) :3 graded stone aggregate 20 mm nominal size ) (5.3.9.2) |
| 26 | Providing Brick Bats in the Sock Pit For Socking Water -do-all complete job as per Specification and direction of E/I( Sl. No.16, Page- 59) |
| 27 | Providing D-Handel made of 16 mm wide and 6 mm thick aluminium flat -do-all complete job as per specification and direction of E/I.(Sl.No-36 pg -60) |
| 28 | Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.(5.3.2.1) |
| 29 | Centering and Shutering including strutting propping etc.and remove all…..Foundation, Footing bases of Column etc for mass concrete.(5.3.17.1) |
| 30 | Centering and Shutering including strutting propping etc.and remove all….Column, pillers, piers and abutment etc(5.3.17.6) |
| 31 | Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved deign and drawing as per building specification and direction of E/I (a) 10mm (TMT coil Fe 500) (only valid for TATA(Tucson), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (b) 12mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (c) 16mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL)5.5.5(b) |
| 32 | Supplying fitting and fixing viterous shite glazed earthen ware I.W.C. of parry hindustan or any other I.S.S approved make with 100 mm H.C.I. \\"p\\" trap 12.5 litres C.I.. Or C. pull and let go flushing clstern of name or other I.S.S equivalent make, complete with all fitting,C.i.. or C.C brackets 32 mm alkathene/P.V.C telescopoc flush,pipe about 2 M long with one brass coupling and clamps G.I chain pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stop cock of weigth not less than 50 grms. 15mm P.V.C connection pipe 450 mm long and the exposed pipe amd cistern with two coats of approved paint over a coat of red oxide primer etc all complete as per specification and direction of E/I. (C) 450 mm long I.W.C (b)with 12.5lit. low level C.I cistern (3.2.1 Cb) |
| 33 | Supplying, fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of 'Hindustan', 'Parry' or any other approved I.S make with 5 liters capacity C.I. automatic fulsing cistern of reliance I.S make with all fittings with C.I.or R.S. brackets for any other I.S.S. approved make with all fittings with C.I.or R.S. brackets standard size G.I. flush pipe with fitting clamps, 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400grams, 15mm P.V.C. connection pipe 450mm long with brass coupling at both ends and 15mm plumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I. Standing corner (600mm x 300mm) (3.2.3 b) |
| 34 | Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved make support ed on painted C.I or R.S bracket 32mm C.I brass waste ,15 mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350 gms ,32 mm P.V.C waste pipe 750 mm long with brass coupling at one end and making plumber joints etc all complete as per specification and direction of E/I. (3.2.5) |
| 35 | Supplying and fixing G.I. fittings of approved make (Conforming to I.S: 1879) all complete as per specification and direction of E/I. (3.1.13.3)Elbow 15 mm |
| 36 | Supplying and fixing G.I. fittings of approved make (Conforming to I.S: 1879) all complete as per specification and direction of E/I.(3.1.13.3)Tee plain 15 mm |
| 37 | Supplying and fixing G.I. fittings of approved make (Conforming to I.S: 1879) all complete as per specification and direction of E/I.(3.1.13.3)Socket 15 mm |
| 38 | Supplying and fixing G.I. fittings of approved make (Conforming to I.S: 1879) all complete as per specification and direction of E/I.(3.1.13.3)Reducing Socket 20 mm |
| 39 | G.I. Pipe 15mm. SR.NO.45 M961(B)/PG .40 |
| 40 | G.I. Pipe 32mm. SR.NO.45 M961(B)/PG .40 |
| 41 | Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.(3.1.13) G.I. Pipe 15mm |
| 42 | Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.(3.1.13)G.I. Pipe 32mm |
| 43 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350gms.) with extra socket all complete as per specification and direction of E/I.) (3.1.5.2) |
| 44 | Polythene water storage tank of ISI mark (syntax/sinter/himgiri/gangotri)with cover and locking system (SR.NO.1 M079/PG .31) |
| 45 | Laying of G.I pipe approved make in trenches with red lead and yarn with socket and screw joint and cutting pipes to sizes and threadibg ends where necessary etc all complete as per specification and direction or E/I. 15 mm 3.1.2 (IV)DWSD PG.101, |
| 46 | Laying of G.I pipe approved make in trenches with red lead and yarn with socket and screw joint and cutting pipes to sizes and threadibg ends where necessary etc all complete as per specification and direction or E/I. 32 mm 3.1.2 (IV)DWSD PG.101, |
| 47 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (ITEM FOR RAIN WATER, SOIL, WASTE & VENT PIPES) 75 mm dia (DSR12.41.1) |
| 48 | Providing & laying 110 mm dia. PVC pipe for outlet of water to outlet drain including all accessories i.e. solvent cement, clamp, ring, sockets etc. (Supreme make)DSR/ 12.41.2 |
| 49 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (ITEM FOR RAIN WATER, SOIL, WASTE & VENT PIPES) 110 mm dia (DSR 12.41.1) |
| 50 | Providing & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion ,Coupler -110 MM (DSR 12.42.1.2) |
| 51 | Single pushfit Coupler 110mm (DSR 12.42.2.2) |
| 52 | Single tee with door 110mm ( DSR 12.42.3.2) |
| 53 | Single tee without door 110mmX110mmX110mm (DSR 12.42.4.2) |
| 54 | Bend 87.5° 110mm (DSR 12.42.5.2) |
| 55 | SHOE 110mm (DSR 12.42.6.2) |
| 56 | Towel Ring (SR.NO.45 M961(B)/PG .40) |
| 57 | Mirror 450x300 (SR.NO.15 M931(B)/PG .36) |
| 58 | Partition plate for urinal 25\\"x13\\" size (SR.NO 25 M941(E)/PG .36) |
| 59 | Wiring for light /fan point/ exhuast fan point / call bell point with 1.5 sqmm FRPVC lnsulated copper conductor single core cable in surface /recessed PVC conduit with piono type switch phenolic lamineted sheet suitable size Gl box etc as Req. (1.1.3) Group-C |
| 60 | 5/6 amps, 3 pin socket (1.23.4) |
| 61 | S/Fsuitable size G.i box on surface/recessed with phenolic laminated sheet cover infront including prividing &fixing 3 pin 5/6amp socket outlet & 5/6 amp piano type switch connection etc as req. (1.29) |
| 62 | S/F 2 pin 5 amp celling rose on existing junction box etc as req.(1.33) |
| 63 | S/F batten / angel holder including connection etc as req.(1.34) |
| 64 | Supply metal exaust fan12''(300mm) (M-775, P-52) |
| 65 | 9/10 watt led bulb (M-855, P-54) |
| 66 | carriage of materials (a) Sand |
| 67 | (b)Brick |
| 68 | (c)Stone Chips |
| 69 | (d)Cement + rod |
| 70 | Add GST @ 18% |
| 71 | Add Labour Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender