Tender For Renovation Of Garden And Parking Garages At Rrch Ramnagar Colony Under Ghugus Sub Area Of Wani Area.Nit No.: Wa4350-Civ-E-029-2026-27
Tender Value
33.45 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
8 days left
EMD
41900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Garden And Parking Garages At Rrch Ramnagar Colony Under Ghugus Sub Area Of Wani Area.Nit No.: Wa4350-Civ-E-029-2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Not Applicable Tender Inviting Authority: Staff Officer (Civil), Wani Area, Western Coalfields Limited Name of work- : Renovation of Garden and Parking Garages at RRCH Ramnagar Colony under Ghugus Sub Area of Wani Area.NIT no.: WA4350-CIV-E-029-2026-27 . Category of services (To be selected by department) Category of bidder (To be selected by bidder) To be entered by department Service Tax Category ( To Be Selected by Bidder) ITC Not Available Works Contract Bidder's status (mandatory) Rate of GST (in %) Total GST(in Rs.) GST to be paid by bidder (in Rs.) GST to be paid by WCL (in Rs.) Name of the Bidder/ Bidding Firm / Company : Select 18.0 0.0 0.0 0.0 PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the bidder name and values only.) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount inRs. P TOTAL AMOUNT With Taxes Total amount in words |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 3 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 4 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil |
| 6 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge i.e stone dust in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Hot rolled deformed bars |
| 15 | Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift |
| 16 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 17 | 12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) |
| 18 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 19 | Carriage of material like earth,rubbish,murum including loading,unloading to a lea of 1 km |
| 20 | Finishing walls with Acrylic Smooth exterior paint of required shade . New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 22 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. Complete On concrete work |
| 23 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 24 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth inCement mortar 1:6 (1 cement : 6 coarse sand) |
| 25 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet |
| 26 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during ransportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 27 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. |
| 28 | White washing with lime to give an even shade : Old work (two or more coats) |
| 29 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 31 | Neat cement punning. |
| 32 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design& shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 33 | Supplying and fixing healthy decorative plants like royal palm, ficus including transportation,loading ,unloading complete as per direction of Engineer Incharge |
| 34 | Providing and fixing open gym equipment AIR WALKER SINGLE(AU-02)LENGTH : 1050 MMWIDTH : 450MMHEIGHT : 1200 MMSAFE AREA : 2. 0 MTR X 1.45MTRMAIN FRAME : 80MM IDFOUNDATION SUPPORT : 32MM IDCONNECTING PIPES :32MM ID ( PADDLE)HANDLE : 25MM IDBUSHES : Φ 60MM MADE IN SEAMLESS PIPEBEARING : PERMANENT LUBRICATED BEARING 6205 OF REPUTED BRANDPINS : Φ 25MM MADE IN BRIGHT BARCIRCLIPS : A 24BASE PLATE : 250 MM / 10MM THICK FOOTREST : 245 X 113 MM MADEIN MS MATERIALNUT & BOLTS : GI NUT BOLTS OF SIZE 18* 40MM / 18*50 MMACCESSORIES :PLASTIC BEARING / CLOSING CAPPOWDER COATING : THE POWDER COATING DONE WITH PURE PP OF REPUTED BRAND |
| 35 | Providing and fixing open gym equipment CHEST EXERCISER / CHEST PRESSDOUBLE(AU-06)LENGTH : 1550 MMWIDTH : 700MMHEIGHT : 2150 MMSAFE AREA : 2. 5 MTR X 1.7 MTRCENTER SUPPORT :100 MM IDHOLEPASS PIPE : 80MM IDCONNECTING PIPES :32MM IDFOUNDATION SUPPORT : 32MM IDBUSHES : Φ 60MM MADE IN SEAMLESS PIPEBEARING : PERMANENT LUBRICATED BEARING 6205 OF REPUTED BRANDALUMINUM SEATS : 320 X 270MM & 5MM THICK.PINS : Φ 25MM MADE IN BRIGHT BARCIRCLIPS : A 24BASE PLATE : 250 MM / 10MM THICKNUT & BOLTS : GI NUT BOLTS OF SIZE 18* 40MM / 18*50 MMACCESSORIES :PLASTIC BEARING / CLOSING CAP/ HANDLE GRIPS.POWDER COATING : THE POWDER COATING DONE WITH PURE PP OF REPUTED BRAND. |
| 36 | Providing and fixing open gym equipment SEATED PULLAR / SHOULDER BUILDER(AU-07)LENGTH : 1650 MMWIDTH : 700MMHEIGHT : 1850 MMSAFE AREA : 2. 6 MTR X 1.7 MTRCENTER SUPPORT :100 MM IDHOLEPASS PIPE : 80MM IDCONNECTING PIPES :32MM IDFOUNDATION SUPPORT : 32MM IDBUSHES : Φ 60MM MADE IN SEAMLESS PIPEBEARING : PERMANENT LUBRICATED BEARING 6205 OF REPUTED BRANDALUMINUM SEATS : 320 X 270MM & 5MM THICK.PINS : Φ 25MM MADE IN BRIGHT BARCIRCLIPS : A 24BASE PLATE : 250 MM / 10MM THICKNUT & BOLTS : GI NUT BOLTS OF SIZE 18* 40MM / 18*50 MMACCESSORIES :PLASTIC BEARING / CLOSING CAP/ HANDLE GRIPS.POWDER COATING : THE POWDER COATING DONE WITH PURE PP OF REPUTED BRAND. |
| 37 | Providing and fixing open gym equipment LEGS EXERCISER/LEG PRESS DOUBLE(AU-10)Length : 1650 mmWidth : 450mmHeight : 1550 mmSafe Area : 2. 6 Mtr x 1.4 MtrCenter Pipe : 100mm IdHolepass Pipe : 80mm IdFoundation Support : 32mm IdConnecting Pipes : 32mm IdHandle : 25mm IdBushes : Φ 60mm Made In Seamless PipeBearing : Permanent Lubricated Bearing 6205 of Reputed BrandPins : Φ 25mm Made In Bright BarCirclips : A 24Base Plate : 250 Mm / 10mm ThickAluminum Seats : 320 X 270mm & 5mmThick.Footrest : 245 X 113mm In Ms MaterialNut & Bolts : GI Nut bolts of Size 18* 40mmPowder Coating : The Powder coating done with pure PP of Reputed Brand |
| 38 | Providing and fixing open gym equipment DOUBLE STANDING TWISTER(AU-28)Length : 750 mmWidth : 650mmHeight : 1500 mmSafe Area : 2. 5 Mtr x 1.6 MtrCenter Support :100 mm idHolepass Pipe :80mm IdConnecting Pipes :32mm IdHandle & Seat Frame :25mm IdBushes : Φ 60mm Made In Seamless PipeBearing : Permanent Lubricated Bearing 6206 of Reputed BrandPins : Φ 25mm Made In Bright BarCirclips : A 24Base Plate : 250 Mm / 10mm ThickTwister Plate : 300mm/ 6mm ThickNut & Bolts : GI Nut bolts of Size 18* 40mmAccessories : Plastic Caps/ Handle Grips.Powder Coating : The Powder coating done with pure PP of Reputed Brand.14 2 WAY STEPPER / BACK EXTENSION(AU |
| 39 | Providing and fixing open gym equipment ARM & PADDALE BIKE(AU-74)LENGTH : 1500 MMWIDTH : 600 MMHEIGHT : 900 MMSAFE AREA :1. 9 MTR X 1.6 MTRMAIN FRAME : 50MM IDHOLEPASS PIPE : 80MM IDFOUNDATION SUPPORT : 32MM IDHANDLE : 25MM IDBASE PLATE : 300 MM / 10MM THICKBUSHES : Φ 60MM MADE IN SEAMLESS PIPE.SEATING ARRANGEMENT ; FRPSEAT 3MM THICK RESTED ON 5MM THICK MS PLATE.THESEATS AND BACK RESTS ARE FITTED ON THE OUTER FRAMES AREMADE UP OF M.S. SHEET AND DEEP DRAWN AND PRESSEDIN TOOLS AND DIES TO HAVE UNIFORM RADIUS OF 20 MM WITHNOSHARP EDGES.BEARING : PERMANENT LUBRICATED BEARING 6205 OF REPUTED BRANDPINS : Φ 25MM MADE IN BRIGHT BARCIRCLIPS : A 24NUT & BOLTS : GI NUT BOLTS OF SIZE 18* 40MM / 18*50 MMPOWDER COATING : THE POWDER COATING DONE WITH PURE PP OF REPUTED BRAND |
| 40 | Providing and fixing open gym equipment PARALLEL BAR(AU-45)Length : 1850mmWidth : 530mmHeight : 2000mmSafe Area : 3.0 Mtr X 2.8 Mtr50mm ID : Main frame, Foundation pipe.32mm ID : Handle frame.Accessories : Plastic Bearing / Closing Cap/ Handle Grips.Powder Coating : The Powder coating done with pure PP of Reputed Brand |
| 41 | Providing and fixing open gym equipment DOUBLE SHOULDER WHEEL(AU-20)Length : 600 mmWidth : 750 mmHeight : 1500 mmSafe Area : 1. 5 Mtr x 1. 75 MtrCenter Support : 100 mm id.Holepass Pipe : 80mm IdFoundation Support : 32mm IdOuter Rings : 25mm IdInner Rings : 20mm IdBushes : Φ 60mm Made In Seamless Pipe.Bearing Permanent Lubricated Bearing 6205 of Reputed Brand. Pins : Φ 25mm Made In Bright Bar.Circlips: A 24.Base Plate : 250 Mm / 10mm Thick. Twister Plate : 300mm/ 6mm ThickNut & Bolts : GI Nut bolts of Size 18* 40mm / 18*50 mm. Accessories : Plastic Bearing / ClosingCap/ Handle Grips. Powder Coating : The Powder coating done with pure PP of Reputed Brand |
| 42 | Total impact of GST for the purpose of CTC Total in Figures 2835250.6004999997 2835250.6004999997 INR Twenty Eight Lakh Thirty Five Thousand Two Hundred & Fifty and Paise Sixty Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender