Housing Urban and Rular Development Government Departments Closing in 13 days TDR #57501475

Tender For Deposit-Compound Of Judges Quarters At Judges Avenue, Kaloor, Compound Of Quarters No1,2,3 And 4 At Retd. Chief Justice, Sri. K.T Koshy, Avenue, Ernakulam, And Compound Of Judges Residential Complex And High Court Guest House At Diwans Roa

Issued by Government Departments · Ernakulam, Kerala
Tender Value
38.97 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
13 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Deposit-Compound Of Judges Quarters At Judges Avenue, Kaloor, Compound Of Quarters No1,2,3 And 4 At Retd. Chief Justice, Sri. K.T Koshy, Avenue, Ernakulam, And Compound Of Judges Residential Complex And High Court Guest House At Diwans Road, Ernakulam-Supply And Installation Of Cctv System.-General Electronics Work

BOQ

Name of Work:- DEPOSIT-Compound of judges Quarters at Judges avenue, Kaloor, compound of quarters No1,2,3 and 4 at Retd. Chief Justice, Sri. K.T Koshy, avenue, Ernakulam, and compound of Judges residential complex and high court Guest house at Diwans road, Ernakulam-Supply and installation of CCTV system.-General Electronics Work
Sl. No. Item Description
1CCTV system
2OD49082/2026-2027:Supply, installation, testing and commissioning of 32-channel 4K AI Network Video Recorder with industrial-grade processor, embedded Linux operating system, web/local GUI and support for minimum 32 IP camera inputs with resolutions up to 32 MP. The NVR shall support Instastream, H.265, Smart H.264+, H.264 and MJPEG decoding, with minimum 384 Mbps incoming, recording and outgoing bandwidth with AI disabled and 200 Mbps with AI enabled; decoding shall support at least 16 channels at 4 MP/30 fps or 32 channels at 1080p/30 fps with AI disabled and 12 channels at 4 MP/30 fps or 24 channels at 1080p/30 fps with AI enabled. AI by recorder shall support minimum two-channel face detection/recognition, four-channel perimeter protection with ten IVS rules per channel and eight-channel SMD Plus. AI by camera shall support minimum 16-channel face detection/recognition, perimeter protection and SMD Plus, eight-channel metadata and ANPR, together with stereo analysis, crowd distribution, people counting, vehicle density and heat map. ANPR shall support minimum eight channels, database capacity of 20,000 plates and blocklist/allowlist functions. NVR shall provide two HDMI and two VGA outputs with simultaneous/heterogeneous display, up to 16-channel playback, one audio input, two audio outputs, 16 alarm inputs, six alarm outputs, four SATA ports supporting minimum 16 TB per HDD, disk grouping and USB/network backup. It shall have three USB ports including two USB 3.0, RS-232, RS-485, eSATA and two Gigabit Ethernet ports supporting multi-address, load balancing, fault tolerance and port binding. It shall support ONVIF Profiles S/G/T, HTTP/HTTPS, IPv4/IPv6, RTSP, SNMP, NTP, DHCP, SMTP, DDNS, multicast, cloud, CGI and SDKPreferred Make: CP Plus/Equivalent/Higher Prefered make: CP PLUS /Higher/ equivalent
3OD49083/2026-2027:Supply, installation, testing and commissioning of 16-channel 4K AI Network Video Recorder with industrial-grade processor, embedded Linux operating system, web/local GUI and support for minimum 16 IP camera inputs with resolutions up to 32 MP. The NVR shall support Instastream, H.265, H.264+, H.264 and MJPEG decoding, with minimum 384 Mbps incoming, recording and outgoing bandwidth with AI disabled and 200 Mbps with AI enabled; decoding shall support at least 16 channels at 4 MP/30 fps with AI disabled and 12 channels at 4 MP/30 fps with AI enabled. AI by recorder shall support minimum two-channel face detection, face recognition, four-channel perimeter protection with ten IVS rules per channel and eight-channel smart motion detection with human/vehicle filtering. AI by camera shall support face detection/recognition, perimeter protection, SMD Plus, human/motor-vehicle/non-motor-vehicle metadata, stereo analysis, crowd distribution, people counting, vehicle density, heat map and ANPR. ANPR shall be supported on all 16 channels at up to eight targets per second, with database capacity of at least 20,000 plate numbers and blocklist/allowlist functions. NVR shall support one 4K HDMI and one VGA output with heterogeneous display, up to 16-channel playback, one audio input/output, four alarm inputs, two alarm outputs, two SATA ports supporting minimum 20 TB per HDD, disk grouping, USB/network backup, one USB 2.0, one USB 3.0, RS-232, RS-485 and one Gigabit Ethernet port. It shall support ONVIF Profiles S/G/T, HTTP/HTTPS, IPv4, NTP, DHCP, DNS, SMTP, DDNS, multicast, P2P, iSCSI, CGI and SDK, mobile viewing and CMS software Prefered make: CP PLUS /Higher/ equivalent
4OD49688/2026-2027:Supply, installation, testing and commissioning of STQC-certified 4 MP IR AI enforcement/ANPR network camera having minimum 1/1.8-inch CMOS sensor, resolution of 2688 × 1520 at 25/30 fps, minimum illumination of 0.0001 lux, electronic shutter from 1/25 s to 1/100,000 s, 10–50 mm motorised varifocal lens with F1.2 or better aperture, 140 dB True WDR, BLC, HLC, defog, edge enhancement, 2D/3D noise reduction, true day/night ICR with polarising filter and minimum four adjustable 850 nm IR illuminators covering at least 30 m and one to two lanes. Camera shall support H.265/H.264M/H.264H/H.264B/MJPEG compression, ROI, CBR/VBR, built-in ANPR for motor vehicles and motorcycles, plate-number and letter recognition, plate cut-out and overview images, vehicle type, colour and make/logo recognition, speed detection from 0–180 km/h, video/radar triggering, GPS positioning and NTP/GPS synchronisation. It shall support traffic-flow, average-speed, vehicle-type, lane-occupancy, headway, queue-length and road-status statistics and detection of speeding, slow driving, wrong-way driving, illegal lane changing, lane occupation, congestion, passenger overload and helmet violations. It shall support composite evidence images, metadata overlay, JPEG snapshots, watermark/tamper verification, SDK/API and automatic network recovery. Interfaces shall include 10/100 Ethernet, one audio input/output, three alarm inputs, two relay outputs, two RS-232 and two RS-485 ports, ONVIF Profiles S/G/T, HTTPS, TLS 1.2, SNMPv3, RTSPS, AES-256 encryption, trusted boot/upgrade, SFTP, NAS and microSD up to 512 GB. Camera shall support 12–36 V DC and/or PoE, consume not more than 13 W, have IP67 and IK10 protection,and comply with BIS, CE, FCC, RoHSPreferred Make : CP plus/Higher/ Equivalent.
5OD50592/2026-2027:Supply, installation, testing and commissioning of STQC-certified outdoor 4 MP dual-light varifocal bullet network camera having minimum 1/2.7-inch progressive-scan CMOS sensor, effective resolution of 2688 × 1520 at 25/30 fps, minimum illumination of 0.001 lux in colour and 0.0001 lux in B/W at F1.4, 0 lux with illumination ON, and electronic shutter from 1/3 s to 1/100,000 s. Camera shall have 2.7–13.5 mm motorised varifocal lens with F1.4 or better aperture, true day/night ICR, starlight technology, 120 dB True WDR, BLC, HLC, AGC, AWB, 3D noise reduction, digital watermarking, smart illumination and minimum 60 m IR and 60 m warm-light range. It shall support quad streams, Instastream/H.265/H.264/H.264H/H.264B/MJPEG compression, ROI, privacy masking, motion detection, tripwire, intrusion and smart motion detection, with smart search when integrated with a compatible NVR. Camera shall have built-in microphone, one audio input, one audio output, one alarm input and one alarm output; RJ-45 10/100 Base-T Ethernet, ONVIF Profiles S/G/T, IPv4/IPv6, HTTPS, TLS 1.2, SNMPv3, RTSPS, SDK/API, SFTP and microSD storage up to 512 GB. Cybersecurity shall include AES-256 encryption, configuration/video encryption, trusted boot, trusted execution, secure firmware upgrade, digest authentication, account lockout, IP/MAC filtering, security logs and syslog. Camera shall support 12 V DC and IEEE 802.3af PoE, maximum consumption not exceeding 12.7 W, IP67 weather protection, IK10 impact protection, metal casing, and compliance with BIS, CE, FCC, RoHS . Preferred Make: CP Plus/ equivalent or higher.
6OD50593/2026-2027:Supply, installation, testing and commissioning of STQC-certified outdoor 4 MP IR vandal-resistant dome network camera having minimum 1/2.7-inch progressive-scan CMOS sensor, maximum resolution of 2688 × 1520 at 25/30 fps, minimum illumination of 0.001 lux in colour and 0.0001 lux in B/W at F1.4, 0 lux with IR ON, electronic shutter from 1/3 s to 1/100,000 s, and 2.7–13.5 mm motorised varifocal lens with F1.4 or better aperture. Camera shall support starlight technology, true day/night ICR, 120 dB True WDR, BLC, HLC, AWB, AGC, ROI, privacy masking, image rotation, mirror function, 2D/3D noise reduction and minimum 50 m smart IR illumination. It shall support quad streams, Instastream/H.265/H.264/H.264H/H.264B/MJPEG compression and intelligent analytics comprising intrusion and tripwire with accurate human and vehicle classification, intelligent motion detection, conventional motion detection, tampering, audio, defocus and security-exception alarms, together with smart search through a compatible AI NVR. Camera shall have built-in microphone, one external audio input, one audio output, one alarm input and one alarm output; RJ-45 10/100 Base-T Ethernet, ONVIF Profiles S/G/T, IPv4/IPv6, HTTPS, TLS 1.2, SNMPv3, RTSPS, SDK/API, SFTP, NAS and microSD storage up to 512 GB. Cybersecurity shall include AES-256 encryption, configuration/video encryption, trusted boot, trusted execution, secure firmware upgrade, digest authentication, account lockout, IP/MAC filtering, security logs and syslog. Camera shall support 12 V DC and IEEE 802.3af PoE, consume not more than 7.4 W, have metal housing, IP67 and IK10 protection, and comply with BIS, CE, FCC, RoHS .Preferred make: CP PLUS /Higher/ equivalent.
7OD49146/2026-2027:Supply, Installation, Testing and Commissioning of Layer-2 Managed 28-Port Gigabit PoE+ Ethernet Switch having minimum 24 × 10/100/1000BASE-T auto-negotiating RJ45 PoE+ ports and minimum 4 × dedicated 1000BASE-X SFP uplink ports; total PoE power budget minimum 380 W; switching bandwidth minimum 56 Gbps; packet forwarding rate minimum 41.67 Mpps; support for IPv4 and IPv6; minimum 8 hardware priority queues; jumbo-frame support of minimum 9,216 bytes; support for minimum 255 VLANs; and 230 V AC power input, complete with rack-mounting kit, power cord, required accessories,Preferred Make: Netgear /Cisco / HP
8OD49147/2026-2027:Supply, Installation, Testing and Commissioning of Layer-2 Managed Gigabit PoE+ Ethernet Switch having minimum 8 × 10/100/1000BASE-T auto-negotiating RJ45 PoE+ ports and minimum 2 × dedicated 100/1000BASE-X SFP uplink ports; total PoE power budget minimum 190 W; switching bandwidth minimum 20 Gbps; packet forwarding rate minimum 14.88 Mpps; support for IPv4 and IPv6; minimum 8 hardware priority queues; jumbo-frame support of minimum 9,216 bytes; support for minimum 255 VLANs; and 230 V AC power input, complete with rack-mounting kit, power cord, required accessories,Preferred Make: Netgear /Cisco / HP
9OD57379/2026-2027:Supply, Installation, Testing and Commissioning of commercial grade of 43 inch Full HD or Higher resolution, Narrow bezel LED Display suitable for 24x7 operation, 500nits brightness, 2HDMI ports, 1nos RJ 45port, 1 USB port with wall Mount bracket and all accessories. certification: FCC, BIS, CE.Preferred Make: LG/ Panasonic/ Samsung
10OD49155/2026-2027:Supply and connecting 6 TB Surveillance class Hard Drives to the NVR Preferred Make:Seagate,WD.
11OD190463/2024-2025:Supply, Installation, Testing and commissioning of 10 meter High Speed HDMI Cable with Ethernet having Max. Data Rate :18Gbps, Max. Resolution: 4K@60Hz (4:4:4), Triple overall shield against EMI/RFI interference, 24K gold plated, corrosion resistant connectivity, RoHS etc. Preffered Make: ATEN, Honeywell, Logic, Kramer, Extron, Lightware.
12OD49157/2026-2027:Supplying and drawn of UTP 4 pair CAT 6 LAN cable with LSZH sheath and minimum 23 AWG copper conductor in the existing surface/recessed steel/PVC conduit as required1 run of Cable. Prefered Make: Belden, Panduit, Molex, R and M, Comscope
13OD190477/2024-2025:Supply, laying, certification and documentation of weather proof Armored CAT-6 outdoor 23AWG UTP cable.Prefered Make: Actassi/ Belden/ Panduit/ Molex/ R and M/ Comscope.
14OD190460/2024-2025:Supply and providing 1 Metre CAT-6 Giga UTP patch cord. Prefered Make: Actassi/ Belden/ Panduit/ Molex/ R and M/ Comscope.
15OD196704/2024-2025: Supply and fixing 24 port Enhanced CAT-6, unloaded rack mountable modular type Patch Panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges.Prefered Make: Actassi/ Belden/ Panduit/ Molex/ R and M/ Comscope.
16OD196703/2024-2025:Supply, Installation, Testing and Fixing of UL Listed CAT6 Keystone for existing patch panelPrefered Make: Actassi/ Belden/ Panduit/ Molex/ R and M/ Comscope.
17OD190457/2024-2025:Supply and Installation of 1G duplex SFP modulePrefered Make: Same make as Network Switch above
18OD190473/2024-2025:Supply and providing SC-LC duplex patch cord 1 metre.Prefered Make: Actassi/ Belden/ Panduit/ Molex/ R and M/ Comscope.
19OD196800/2024-2025:Supply, Installation, Testing and Commissioning of 6 Port fully loaded 1U Rack mountable LIU with Splice tray ,pigtails and cable management. Prefered Make: Belden/ corning/ Finolex /Molex/ Legrand.
20OD196454/2024-2025:Supply, Installation, Testing and Commissioning of 24 Port fully loaded 1U Rack mountable LIU with Splice tray ,pigtails and cable management. Prefered Make: Belden/ corning/ Finolex /Molex/ Legrand
21OD199817/2024-2025:Supply , Laying ,splicing and testing of 6 core armored Single mode outdoor purpose OFC through HDPE/ conduit with enough patch code in patch boxes with all other necessary accessories to complete the work. Make: Molex, AMP,Finolex
22OD190478/2024-2025:Supply and installation of Pole with min 5.5 meter or more height, 75mm diameter, fixed in a concrete footing of min height of 1mtr, suitable cantilever with Shaft(if required) properly finished with painting and having 1 meter Copper Alloy based lightning Arrester, clamp, wire with 250 microns copper bonded low carbon steel rod, lightning and surge protection / with pipe earthing, 10SWG cabling etc.
23OD50784/2026-2027:Supply and fixing the Galvanized Iron (GI) as per IS 2629 multi diameter pole supplied with all necessary accessories to fix CCTV Cameras, with following minimum specifications 1. Pole Height: 5.5 meters 2. Bottom diameter: 130mm 3. Sheet Thickness: 4mm-6mm 4. Surface Finish: Polished 5. Base Plate: 210x210x12 mm 6. Concrete base Dimension:400x400x1000 mm(800mm below ground) (W x B x D) 7. Avg. Thickness of Galvanization: 65 Microns etc. It should have 1 meter Copper Alloy based lightning Arrester, clamp, wire with 250 microns copper bonded low carbon steel rod, lightning and surge protection / with pipe earthing, 10SWG cabling etc. Note: The pole should be fixed on the concrete base using high quality suitable nuts and bolts
241.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
251.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
2690.9.2.1:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid
2790.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size
2814.4:Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
29OD190472/2024-2025:Supply and providing ISI pipe earthing as per IS 3043 CI/GI earth pipe with required filling charcoal around the earth pipe up to a distance of 15cm, filling the rest of the portion with excavated soil, including watering and ramming, providing brick work (20mm) necessary at the top in 1:6 cement mortar providing cast iron gully trap with GI covering at the top
305.7:Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
315.19:Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
32OD190479/2024-2025:Supply and fixing of 1 or 2 module modular PVC Box.Preferred Make: Actassi, Belden, Panduit, R and M, Legrand or equivalent
33OD195584/2024-2025:Supply and installation of 19inch 400 x 450 mm 6U Out Door Enclosure having Construction of material 1.2/1.5mm thick CRCA sheet, rack includes a very compact design, welded structure with front accessible. The side panels are integrated type and welded with canopy and bottom cover, rigid frame that can be fixed to the pole, Front door with filter, louver and T type lock 90 CFM, 230V AC FAN- 2 nos front door self adhesive thermal foam from inside, 3 Socket PDU 5Amp-1 No, door hinges-2Nos, cable glance at bottom side for cable entry, Gasket (as per IP 55 standard), pole mounting bracket rear side- 2Nos, hood for air inlet at front side, earthing, powder coated surface, finish:light grey etc.Preferred Make: Rittal, Netrack, Alpine
34OD190459/2024-2025:Supply and fixing of UL certified 19 inch 9U Network Rack with ACDB greater than6 port with 1U Slotted type Rack Mountable Horizontal Cable Manager Duct, coolingfan etc.Approved Make: D-Link, HCL, Netrack, President, Valrack.
352.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 volts, on surface/ recess, complete with tinned copperbus bar, neutral bus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator)8 way, Double door
36OD57765/2026-2027:Supply, Installation, Testing and Commissioning of 1KVA Online UPS with 1440 VAH with External Tubular battery (Exide/ Amaron) with Battery rack,power extension cord/ cabling to connect DB. 5year Warranty for UPS and Battery. Preferred Make: APC/Emerson/Numeric/Luminous/ Zenrise/ Hykon/Techser/ equivalent
37OD57764/2026-2027:Supply, Installation, Testing and Commissioning of 3KVA Online UPS with 2880 VAH with External Tubular battery (Exide/ Amaron) with Battery rack,power extension cord/ cabling to connect DB. 5year Warranty for UPS and Battery. Preferred Make: APC/Emerson/Numeric/Luminous/ Zenrise/ Hykon/Techser/ equivalent
38OD58047/2026-2027:Supply, Installation, Testing and Commissioning of line interactive 1KVA UPS with battery back up minimum 128 VAH internal SMF battery, 1 phase in / 1 phase out, 230Vac Nominal Voltage, Frequency Range: 45-65 Hz or better, efficiency better than 70 % on full load, Warranty 3 year for both UPS and battery, including all connecting cables, out door IP65 mounting rack/ shelf and other accessories etc. Approved Make: APC, Emerson, GE, Numeric, Socomec
392.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
40OD199951/2024-2025: Supply and drawing of 3 core 2.50 sq. mm PVC insulated /XLPE insulated Armoured control Cables with copper conductor for working volages conforming to IS 1554 part I 1988 in the existing surface / recess conduit as required including giving necessary connections for connectivity.
412.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole
421.14.2:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
431.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
441.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
45OD57823/2026-2027:Supply and laying of industrial grade 80SWG PVC insulated GI Taut/Stay wire with supporting poles for laying of cable
46OD56761/2026-2027: Supply, Installation, Testing and Commissioning of Client Workstation CPU having the following specification - Windows 11 Pro or better, Processor : Intel Core i7-14700 or better ( 4.9 GHz, 25 MB L3 cache,12 cores, 20 threads) etc., Graphics: NVIDIA A400 4GB or better, Memory: 16 GB DDR5, Memory Slots: DIMM, Internal Storage:512 GB SSD; 1 TB SATA HDD or higher, Audio: Realtek 2.0W internal mono speaker or better, Ports: Front 2 USB ports of 10Gbps or better ; 1 universal audio jack 1 audio-in; 1 audio-out; 1 RJ-45( 1G or better); 2 DisplayPort ; rear 2 USB ports of 10Gbps or better, HDMI; VGA etc. wireless keyboard and mouse, Expansion Slots:1 PCIe 3 x4 (x16 connector); 1 PCIe 3 x4 (x4 connector); 1 PCIe 3 x1 (x4 connector); 1 PCIe 5 x16 (x16 connector); 1 M.2 2230 PCIe 3 X1 for WLAN etc., OEM : Have an Indian Market presence for at least 10 Years. Prefered Make : Dell / HP / Lenovo. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57501475
AUTHORITY Government Departments
TENDER VALUE 38.97 Lakhs
LAST DATE 29-09-2026
Authority
Authority Name Public Works Department
Work Description Tender for Deposit-Compound Of Judges Quarters At Judges Avenue, Kaloor, Compound Of Quarters No1,2,3 And 4 At Retd. Chief Justice, Sri. K.T Koshy, Avenue, Ernakulam, And Compound Of Judges Residential Complex And High Court Guest House At Diwans Road, Ernakulam-Supply And Installation Of Cctv System.-General Electronics Work
Basic Detail
Tender No PWD/BLDG/TR/21660/2024_7_1_1/1
Bidding Type Tender
Location
City Ernakulam
State Kerala
Key Dates
Publish Date 12 Sep 2026
Submission Date 29 Sep 2026
Open Date 01 Oct 2026
Finance
Tender Value 38.97 Lakhs
Tender Fee 2760
EMD 50000
Exemption Not Available
Document List
41f5ff61-d275-4c7d-b672-d74199054400.html
AMC.pdf
BOQ_1472894.xls
MM.pdf
NIT.pdf
SBD.pdf
Tendernotice_1 (19).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 29, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Oct 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

41f5ff61-d275-4c7d-b672-d74199054400.html

pdf

AMC.pdf

xls

BOQ_1472894.xls

pdf

MM.pdf

pdf

NIT.pdf

pdf

SBD.pdf

pdf

Tendernotice_1 (19).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders