Tender For Stmc Work For 01 No. Of Road For An Aggregated Length Of 12.568 Km Under Bbsr (R And B) Division-Ii, (Package-V)
Tender Value
1.60 Crore
Estimated cost
Bid Submission
19 Sep 2026
4 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stmc Work For 01 No. Of Road For An Aggregated Length Of 12.568 Km Under Bbsr (R And B) Division-Ii, (Package-V)
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material upto 1000m lead including cost of all labour, machinery etc complete as per Technical Specifications and Clause - 201 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 2 | Flank dressing to proper camber including cost of labour etc complete as per direction of Engineer-In-Charge. |
| 3 | Providing Tack coat with bitumen emulsion on prepared bituminous surface, spreading @ 0.20kg / sqm using mechanical means including cost, conveyance of bitumen emulsion & cost of all labour, machinery etc complete as per Technical Specifications and Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 4 | Providing & Laying B.U.S.G. of 75mm thick in two layer using tack coat 3.0kg/10 sqm 25mm to 40mm size B.H.G.C.B.metal of 0.45cum & 12.0kg of 80/100 penetration grade of bitumen in one layer with 0.12 cum of 12mm size B.H.G.C.B.chips as key stone per 10sqm and laying & spreadig including heating, pouring and spreading bitumen &materials after Unit: cleaning the road surface and rolling with PRR including hire charges of PRR & cost, conveyance, royality of all materials & cost of T& P, labour charges etc complete as per specifications and direction of Engineer In Charge |
| 5 | Providing & laying Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per clauses 501, 503 and 507 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 6 | Providing, laying, spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the material at OMC in mechanical mix plant, carriage of mixed material to site, laying in uniform layers on well prepared surface & compacting to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause -406 of MoRT&H Specifications for Road & Bridge works (5th Revision) |
| 7 | Crack Filling : Filling of crack using slow curing bitumen emulsion and applying crusher dust in case crack are wider then 3 mm. |
| 8 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 |
| 9 | Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes |
| 10 | Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor |
| 11 | Excavation for road work in soil with hydraulic excavator of 0.9cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment locations with all lifts & leads up to 1000m.as per approved Drawing & Technical Specifications and as per Clause - 301 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 12 | Sand filling in Road work & foundation of structure as per approved Drawing & Technical Specifications and as per Section - 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 13 | P.C.C.(1:3:6) nominal mix in foundation and plinth using 40mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete as per direction of Engineer-In-Charge |
| 14 | P.C.C.(1:2:4) using 12mm size crushed stone aggregates including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete as per direction of Engineer-In-Charge |
| 15 | Providing GSB Gr-vi materials, spreading in uniform layers with motor grader, mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 401 of MoRT&H Specifications for Road & Bridge works (5th Revision) |
| 16 | Providing & laying of 80 cm thick cement concrete interlocking paver block of M-30 grade of approved make, veriety, colour & size made by block making machine with strong vibratory compaction of approved design and shape laid in required colour paitern over a prepared bed, filling the joints with sand etc all complete including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge |
| 17 | Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the engineer including preparation of ground, fetching of sods and watering & Technical Specifications and as per Clause - 307 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 18 | Providing compacted granular materials in shoulder by using moorum having required P.I. value with sand admixture if required as per approved Drawing & Technical Specifications and as per Clause - 407 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 19 | Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing and as per Clause 602 of MoSRT&H Specifications for Road & Bridge works (5th Revision) |
| 20 | RCC M-25 grade in different items using 20 to 10mm size crushed stone aggregates mixed by Concrete mixer, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 21 | Steel reinforcement works in structure & CD work using HYSD (uncoated reinforcement bars of Fe-500 gr.) including cost, conveyance of all materials with cost of all labour etc complete as per approved Drawing & Technical Specifications and Section -1600 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 22 | White washing Two coat with approved good shell lime over the Tree , parapet, prepared wall, bridge railling, etc. including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 23 | Providing & fixing of RCC M-15 grade km stone, Hectometre of standard design as per IRC:8-1980, fixing in position with painting & printing including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section- 800, 1600 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision).5th km stone |
| 24 | Ordinary km stone |
| 25 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and Section- 800, 1600 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 26 | Providing and fixing of road stud 100x100mm, diecast in fibre, resistant to corrosive effect of salt and grit, fitted with lens reflectors, installed in concrete or asphaltic surface by suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973 |
| 27 | Providing, fixing retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS circular pipe 65 NB firmly fixed to the ground by means of PCC M25 grade foundation of 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Clause 801 of MoRT&H Specifications for Road & Bridge works (5th Revision).90cm equilateral triangle |
| 28 | 90cm equilateral triangle |
| 29 | 60cm circular |
| 30 | 80cm x 60cm rectangular |
| 31 | 60cm x 45cm rectangular |
| 32 | 90cm octagon |
| 33 | Providing, fixing of direction & place Identification Signs size upto 0.9sqm Board retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS circular pipe 65 NB firmly fixed to the ground by means of PCC M25 grade foundation of 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Clause 801 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 34 | Providing, fixing of direction & place Identification Signs more than 0.9 sqm Size board retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS circular pipe 65 NB firmly fixed to the ground by means of PCC M25 grade foundation of 2 x 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Clause 801 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 35 | Providing & erecting a \\"W\\" metal beam crash barrier comprising of 3mm thick corrugated steel metal beam rail, 70cm above road/ ground level fixed ISMC series channel vertical post 150 x 75 x 5 mm spaced 2m centre to centre, 1.8m high, 1.1m below ground / road level, all steel part & filments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause-811 of MoRT&H Specifications for Road & Bridge works (5th Revision). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender